2-outlet power strip distributes electricity to home and office electronics, including computers, power tools and appliances.
Features
2 BS1363A outlets distribute power to appliances, tools, lighting and other electronics
Plugs directly into the wall (no cord required) for easy installation in tight spaces
13A circuit breaker shuts down both UK outlets for safety in case of overload
This product is covered by a Lifetime Limited Warranty
Typical Applications
Distribute power to computer equipment and other devices in an office, workbench, retail or telecom environment
Package Includes
PS1B 2-Outlet Direct-Plug Power Strip, BS1363A Outlets, White
Compact Power Strip Delivers Electricity to 2 Devices at the Same Time
Compatible with standard electrical equipment, this Protect It!® power strip plugs directly into a wall outlet (no cord required). It features two BS1363A outlets and a durable white plastic housing. It is ideal for powering almost anything with a compatible plug, including computers and mobile devices to appliances and power tools.
Compact High-Impact Housing Makes Connecting in Tight Spaces Easier
This direct-plug power strip is easy to install in confined spaces, such as behind furniture. One outlet is located on top of the unit, so a connected power cord runs parallel to the wall, allowing you to push furniture against the wall to maximize space.
Premium Safety Features Designed for Protecting Your Valuable Equipment
An integrated 13A circuit breaker protects all outlets and automatically cuts power if the protection circuit is incapacitated, preventing equipment damage and indicating replacement is required.
4-outlet power strip distributes electricity to home and office electronics, including computers, power tools and appliances.
Features
4 BS1363A outlets distribute power to appliances, tools, lighting and other electronics
1.8 m cord with BS1363A plug offers flexible placement in relation to an AC wall outlet
29.5 cm plastic housing designed to withstand the rigors of everyday use
Rear keyhole slots enable mounting to desk or workbench for easy access to outlets
13A circuit breaker shuts down all UK outlets for safety in case of overload
This product is covered by a Lifetime Limited Warranty
Typical Applications
Distribute power to computer equipment and other devices in an office, workbench, retail or telecom environment
Mount a power strip to the edge of a desk or workbench for easy access to outlets
Package Includes
PS4B18 4-Outlet Power Strip, British BS1363A Outlets, White
29.5 cm Power Strip Delivers Electricity to 4 Devices at the Same Time
Compatible with standard electrical equipment, this ProtectIt!® power strip features four BS1363A outlets and a durable white plastic housing. It is ideal for powering almost anything with a compatible plug, including computers and mobile devices to appliances and power tools.
Allows Flexibility in Placing the Power Strip Away from the Wall
The BS1363A plug is attached to a 1.8-meter power cord, which gives you more choices in placing the power strip away from the connected AC outlet.
Vertical or Horizontal Mounting for Desks and Workbenches
Keyhole-shaped mounting slots on the back of the power strip allow you to permanently install it on any flat surface, including walls, with user-supplied hardware.
Premium Safety Features Designed for Protecting Your Valuable Equipment
The PS4B18 features an on/off switch with diagnostic LED that provides one-touch control over all connected devices. An integrated 13A circuit breaker protects all outlets and automatically cuts power if the protection circuit is incapacitated, preventing equipment damage and indicating replacement is required.
6-outlet power strip distributes electricity to home and office electronics, including computers, power tools and appliances.
Features
6 BS1363A outlets distribute power to appliances, tools, lighting and other electronics
1.8 m cord with BS1363A plug offers flexible placement in relation to an AC wall outlet
40.6 cm plastic housing designed to withstand the rigors of everyday use
Rear keyhole slots enable mounting to desk or workbench for easy access to outlets
13A circuit breaker shuts down all UK outlets for safety in case of overload
This product is covered by a Lifetime Limited Warranty
Typical Applications
Distribute power to computer equipment and other devices in an office, workbench, retail or telecom environment
Mount a power strip to the edge of a desk or workbench for easy access to outlets
Package Includes
PS6B18 6-Outlet Power Strip, British BS1363A Outlets, White
40.6 cm Power Strip Delivers Electricity to 6 Devices at the Same Time
Compatible with standard electrical equipment, this ProtectIt!® power strip features six BS1363A outlets and a durable white plastic housing. It is ideal for powering almost anything with a compatible plug, including computers and mobile devices to appliances and power tools.
Allows Flexibility in Placing the Power Strip Away from the Wall
The BS1363A plug is attached to a 1.8-meter power cord, which gives you more choices in placing the power strip away from the connected AC outlet.
Vertical or Horizontal Mounting for Desks and Workbenches
Keyhole-shaped mounting slots on the back of the power strip allow you to permanently install it on any flat surface, including walls, with user-supplied hardware.
Premium Safety Features Designed for Protecting Your Valuable Equipment
The PS6B18 features an on/off switch with diagnostic LED that provides one-touch control over all connected devices. An integrated 13A circuit breaker protects all outlets and automatically cuts power if the protection circuit is incapacitated, preventing equipment damage and indicating replacement is required.
Overview
Clamps to your desktop or workstation to provide easy access to AC and USB power where you most need it
Key Features
Adjustable desk clamp fits most tables and other flat surfaces 10–50 mm thick
Adds AC accessibility at arm’s length to avoid connecting power cords under your desk
Accommodates most surge protectors and power strips 50–70 mm wide
EVA foam pads on the clamp protect your desktop from scuffs and scratches
Heavy-duty ABS construction strong and durable enough for day-to-day use
This product is covered by a Lifetime Limited Warranty (coverage details)
Additional Features
Power Strip Clamp Mounts Securely on Your Desktop without Drilling
This clamp-on holder for power strips and surge protectors is easy to install without the hassle of drilling into walls or workbenches. Keep AC outlets and USB ports within easy reach of your desk, table or workspace by attaching the CLAMPINTL to any flat surface 10 to 50 millimeters (0.4 to 2 inches) thick. No tools are needed. Just slide the clamps onto the surface’s edge, tighten the adjustment knobs by hand, and snap your surge or power strip into the mounting clip.
No More Crawling Under Desks to Plug Devices into Hard-to-Reach Outlets
Add AC and USB power where you most need it. The CLAMPINTL lets you install a power strip or surge protector within an arm’s reach of your chair. The heavy-duty plastic clamp accepts most strips 50 to 70 millimeters (2 to 2.75 inches) in width. Soft EVA foam pads on the clamp protect your desk from scuffs and scratches.
Retrofit Existing Installations to Improve Access to Outlets
Add AC outlets and USB ports somewhere new or change the mounting of an existing power or surge strip to improve access to power. A cable management clip in the rear keeps power cords neat and tidy.
Typical Applications
Mount a power strip to the edge of a workbench for easy access to outlets
Install a power strip at a trade show booth or other temporary location without drilling holes
Mount a power strip to a desktop without damaging its surface
Add conveniently placed power outlets to your home office to facilitate working from home
Package Includes
CLAMPINTL Clamp-On Power Strip Holder, White
6-outlet surge protector safeguards your home/office electronics against dangerous surges, spikes and line noise.
Features
6 BS1363A outlets distribute power to appliances, tools, lighting and other electronics
1.8 m cord with BS1363A plug offers flexible placement in relation to an AC wall outlet
250 joules protect your valuable electronics against dangerous surges and spikes
Rear keyhole slots enable mounting to desk or workbench for easy access to outlets
13A circuit breaker shuts down all UK outlets for safety in case of overload
This product is covered by a Lifetime Limited Warranty
Typical Applications
Protect computers, peripherals, home theater equipment and other valuable electronics against AC power surges and spikes
Filter potentially damaging line noise to improve connected equipment’s performance and lifespan
Safeguard valuable data against damage stemming from unexpected surges
Mount a surge protector to the edge of a desk or workbench for easy access to outlets
Package Includes
TLP6B18 6-Outlet Surge Protector - British BS1363A Outlets, in White
6-Outlet Surge Protector Safeguards Your Computer Against Power Fluctuations
Ideal for your home or office workstation, this Protect It!® 6-outlet surge protector features a surge suppression rating of 250 joules and provides protection in line-to-neutral (L-N) mode to defend your sensitive electronic components against power surges and spikes.
British BS1363A Outlets Accept a Wide Range of Electronic Devices
Plug your PC, printer, scanner, router, modem, television, stereo receiver or other home/office electronics into six BS1363A outlets to protect them against dangerous surges, spikes and line noise. The 1.8-meter AC power cord with space-saving right-angle BS1363A plug helps you connect the surge protector to a wall outlet located behind furniture.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems. This surge protector filters out disruptive line noise that can disturb your electronics and inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
Vertical or Horizontal Mounting for Desks and Workbenches
Keyhole-shaped mounting slots on the back of the surge protector allow you to permanently install it on any flat surface, including walls, with user-supplied hardware.
Premium Safety Features for Protecting Your Valuable Equipment
The TLP6B18 features an on/off switch that provides one-touch control over all connected devices. A green LED confirms that your connected equipment is protected. An integrated 13A circuit breaker protects all outlets and automatically cuts power in the event of an overload, preventing equipment damage. The high-impact plastic housing is designed for the rigors of everyday use.
4-outlet power strip with USB-A ports distributes electricity to home and office electronics and charges your mobile devices.
Features
4 BS1363A outlets distribute power to appliances, tools, lighting and other electronics
1.8 m cord with BS1363A plug offers flexible placement in relation to an AC wall outlet
2 USB-A ports share 2.1A of power for charging phones, tablets and other mobile devices
Rear keyhole slots enable mounting to desk or workbench for easy access to outlets
13A circuit breaker shuts down all UK outlets for safety in case of overload
This product is covered by a Lifetime Limited Warranty
Typical Applications
Distribute power to computer equipment and other devices in an office, workbench, retail or telecom environment
Mount a power strip to the edge of a desk or workbench for easy access to outlets
Charge a smartphone and tablet without taking up available AC outlets
Package Includes
PS4B18USBW 4-Outlet Power Strip, British BS1363A Outlets, White
35.6 cm Power Strip Delivers Electricity to 4 Devices at the Same Time
Compatible with standard electrical equipment, this Protect It!® power strip features four BS1363A outlets and a durable white plastic housing. It is ideal for powering almost anything with a compatible plug, including computers and mobile devices to appliances and power tools.
Charges 2 Mobile Devices with 2.1A of Shared Power
In addition to AC outlets, this power strip provides USB charging for up to two mobile devices, including smartphones, tablets and e-readers. The USB-A ports eliminate the need for AC adapters for charging cords, leaving outlets available for AC equipment.
Designed to Give You Flexibility in Placing the Power Strip Where It’s Most Needed
The power strip features a space-saving right-angle BS1363A plug that helps you connect to a wall outlet located behind furniture that is placed flush against the wall. The plug is attached to a 1.8-meter power cord, which gives you more choices in placing the power strip away from the connected AC outlet.
Vertical or Horizontal Mounting for Desks and Workbenches
Keyhole-shaped mounting slots on the back of the power strip allow you to permanently install it on any flat surface, including walls, with user-supplied hardware.
Premium Safety Features Designed for Protecting Your Valuable Equipment
The PS4B18USBW features an on/off switch with diagnostic LED that provides one-touch control over all connected devices. A built-in 13-amp circuit breaker immediately shuts down the entire power strip in case of an overload to prevent equipment damage.
Overview
Protects edge network devices, including PoE cameras and LAN access points, from lightning, power surges, ESD and cable discharge events.
Key Features
Easy to connect between mid- or end-span PoE source and device using Cat5e/6/6a cabling
Dustproof, shockproof and IP66-rated to endure powerful jets of water from any direction
Supports 802.3af/at/bt IEEE standards and Ethernet data speeds up to 1 Gbps
Plug-and-play operation with no external power required for immediate installation
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
2-year limited warranty
Additional Features
Outdoor In-Line Surge Protector Keeps Your 1G PoE Edge Network Equipment Safe
Ideal for home/corporate security systems, wireless access points, routers, bridges and other PoE (Power over Ethernet) applications, the B110-SP-CAT-OD protects outdoor-mounted network equipment from damage caused by lightning, power surges, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network equipment using standard 23/24 AWG Cat5e/6/6a cables (sold separately) and the included cable glands. Both mid-span and end-span PoE are supported. Note: two B110-SP-CAT-OD surge protectors are required to protect both source and device.
Your Last Defense Against Intruding Voltage Spikes That Can Cause Costly Downtime
Thyristor diode technology features low impedance and superior power handling capabilities, providing protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. Line-to-line and line-to-ground protection modes help protect against short circuits and minimize distortion of high-speed signals. The B110-SP-CAT-OD meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact) and IEC 61000-4-5 (Lightning) 10kA (8/20µs), 20kV (8/20µs).
IP66 Rating Denotes Resistance to Dust and Water
The housing's IP66 rating means the surge protector is not only 100% protected against dust, but also able to endure high-pressure jets of water from any direction with no damage or decline in performance. In addition to its water and dust resistance, which keeps it safe in storms and other foul weather, the B110-SP-CAT-OD is shockproof, giving you peace of mind without worrying about the unit being jarred and damaged.
Ready to Use Right from the Package, So You Can Plug and Play Immediately
This PoE in-line surge protector meets 802.3af, 802.3at and 802.3bt IEEE standards, supporting up to 90W of DC power (due to power dissipation, powered devices receive 71W) and Ethernet data speeds up to 1 Gbps. No external power supply is required. Rear mounting holes allow for convenient installation where needed, such as high on a wall or pole. The distance between the B110-SP-CAT-OD and the equipment it is protecting should not exceed 328.08-ft. (100 m) (for best performance, the installation's total cable distance should not exceed 328 feet).
TAA-Compliant for GSA Schedule Purchases
The B110-SP-CAT-OD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Typical Applications
Protect an outdoor PoE device, such as a security camera, against damage from lightning, electrostatic discharge, cable discharge or power surge
Package Includes
B110-SP-CAT-OD Outdoor PoE Surge Protector
Grounding wire, 18 AWG, 1-ft. (0.31 m)
2x Metric cable glands, 8.4 mm
2x PCBA mounting screws
4x Surface mounting screws
4x Surface screw anchors
4x Unit cover screws
Owner’s manual
- Review: The 10 Best Wireless Access Points
- Review: The Top 10 Best Ethernet Cables
- What Is An Ethernet Cable And What Does It Do?
- 10 Best CCTV Security IP Cameras For Home & Business
- Review: Best Powerline Adapters In The UK
- Celebrating 20 Years Of Comms Express!
- The Top 10 DrayTek Wireless Access Points
- Best Selling APC Products At Comms Express
- Review: Top 5 Best Performing APC Uninterruptible Power Supply Units (UPS)
- Review: Top 10 Best PDU’s