Switch outlets & IT equipment across A and B feed + meter the input and branch circuits
ePDU G3 Switched models allow lights-out control of devices including switching devices powered across multiple ePDUs. They include IEC Class 1 (±1%) billing grade accuracy, an advanced hot-swap meter with LCD pixel display showing V, W, A and kWh, and the ability to daisy chain 8 ePDUs to share the same network connection and IP address.
Securely allows remote control and remote rebooting
Highly secure with Admin controlling user access permission, password protection and SSL configurable to 1024 or 2048 bit
Switch equipment on/off across both A and B feed (Requires Daisy Chained ePDUs)
Sequence outlets to avoid in-rush current, to ensure equipment starts in correct order
Input and Phase Metering, Circuit Breaker Current Metering
IEC outlet eGrip plug retention: retains all standard IEC plugs
60 Degree C operating temperature
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 1154mm high
En masse configuration and update available via Intelligent Power Manager software
Single Pane Monitoring of many ePDUs+UPS as part of the power chain, & graceful Equipment shut down via Intelligent Power Manager software
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Single-phase 230v IEC-320-C14
Output:- 16 x IEC-320-C13
Daisy-Chain 8 ePDUs from one IP port and one IP address: this reduces the cost of networking, reduces IP addresses and data packets on the network. Daisy Chaining reduces network infrastructure costs by up to 87%
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
includes central advanced LCD display with menu system. Change settings incl. IP address, configure via USB stick copy / paste configuration file or configure En Masse via IPM software.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
No Downtime on Upgrades
ePDU G3 has Hot-Swap network components - update or change without changing the outlet state