Designed for reliable and cost effective power distribution, the ePDU G3 Basic models feature Eaton’s patented IEC outlet grip plug retention, color-coded outlet sections, a low-profile form factor and a high operating temperature. 0U models include both rear and side button mounting system and Eaton’s patented variable mounting system.
Key Features
IEC outlet eGrip plug retention: retains all standard IEC plugs
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 443mm High
60 Degree C operating temperature
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Single-phase 230v IEC-320-C14
Output:- 8 x IEC-320-C13
Integrated Grip
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
Designed for reliable and cost effective power distribution, the ePDU G3 Basic models feature Eaton’s patented IEC outlet grip plug retention, color-coded outlet sections, a low-profile form factor and a high operating temperature. 0U models include both rear and side button mounting system and Eaton’s patented variable mounting system.
Features:
IEC outlet eGrip plug retention: retains all standard IEC plugs
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 704mm High
60 Degree C operating temperature
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Single-phase 230v IEC-320-C14
Output:- 12 x IEC-320-C13
Integrated Grip
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
Designed for reliable and cost effective power distribution, the ePDU G3 Basic models feature Eaton’s patented IEC outlet grip plug retention, color-coded outlet sections, a low-profile form factor and a high operating temperature. 0U models include both rear and side button mounting system and Eaton’s patented variable mounting system.
Features:
IEC outlet eGrip plug retention: retains all standard IEC plugs
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 704mm High
60 Degree C operating temperature
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Single-phase 230v IEC-320-C14
Output:- 16 x IEC-320-C13
Integrated Grip
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
Designed for reliable and cost effective power distribution, the ePDU G3 Basic models feature Eaton’s patented IEC outlet grip plug retention, color-coded outlet sections, a low-profile form factor and a high operating temperature. 0U models include both rear and side button mounting system and Eaton’s patented variable mounting system.
Features:
IEC outlet eGrip plug retention: retains all standard IEC plugs
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 704mm High
60 Degree C operating temperature
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Single-phase 230v IEC-320-C20
Output:- 16 x IEC-320-C13
Integrated Grip
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
Designed for reliable and cost effective power distribution, the ePDU G3 Basic models feature Eaton’s patented IEC outlet grip plug retention, color-coded outlet sections, a low-profile form factor and a high operating temperature. 0U models include both rear and side button mounting system and Eaton’s patented variable mounting system.
Features:
IEC outlet eGrip plug retention: retains all standard IEC plugs
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 1070mm High
60 Degree C operating temperature
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Single-phase 230v IEC-320-C20
Output:- 20 x IEC-320-C13
Output:- 4 x IEC-320-C19
Integrated Grip
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
Designed for reliable and cost effective power distribution, the ePDU G3 Basic models feature Eaton’s patented IEC outlet grip plug retention, color-coded outlet sections, a low-profile form factor and a high operating temperature. 0U models include both rear and side button mounting system and Eaton’s patented variable mounting system.
Features:
IEC outlet eGrip plug retention: retains all standard IEC plugs
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 1070mm High
60 Degree C operating temperature
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Single-phase 230v IEC-60309 16A
Output:- 20 x IEC-320-C13
Output:- 4 x IEC-320-C19
Integrated Grip
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
Designed for reliable and cost effective power distribution, the ePDU G3 Basic models feature Eaton’s patented IEC outlet grip plug retention, color-coded outlet sections, a low-profile form factor and a high operating temperature. 0U models include both rear and side button mounting system and Eaton’s patented variable mounting system.
Features:
IEC outlet eGrip plug retention: retains all standard IEC plugs
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 1604mm High
60 Degree C operating temperature
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Three-phase 400v IEC-60309 32A 3Ph
Output:- 36 x IEC-320-C13
Output:- 6 x IEC-320-C19
Integrated Grip
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
Designed for reliable and cost effective power distribution, the ePDU G3 Basic models feature Eaton’s patented IEC outlet grip plug retention, color-coded outlet sections, a low-profile form factor and a high operating temperature. 0U models include both rear and side button mounting system and Eaton’s patented variable mounting system.
Features:
IEC outlet eGrip plug retention: retains all standard IEC plugs
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 704mm High
60 Degree C operating temperature
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Three-phase 400v IEC-60309 32A 3Ph
Output:- 6 x IEC-320-C19
Integrated Grip
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
Designed for reliable and cost effective power distribution, the ePDU G3 Basic models feature Eaton’s patented IEC outlet grip plug retention, color-coded outlet sections, a low-profile form factor and a high operating temperature. 0U models include both rear and side button mounting system and Eaton’s patented variable mounting system.
Features:
IEC outlet eGrip plug retention: retains all standard IEC plugs
Colour-coded outlet and branch circuits for simple load balancing
Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
Low-profile form factor: 52mm wide x 53mm deep x 704mm High
60 Degree C operating temperature
Installation: Button mounting on rear & side + variable mounting system
Input:- 3 metre Three-phase 400v IEC-60309 32A 3Ph
Output:- 3 x IEC-320-C13
Output:- 6 x IEC-320-C19
Integrated Grip
IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.
Low profile chassis
The ePDU doesn’t protrude into the rack and is low profile even at the breakers
52mm wide x 53mm high and 58.7mm at breakers on most models
Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default
Small with Flexible Mounting: Easily access hot-swappable IT equipment and components.
ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
Choose to raise or lower the ePDU in the rack to suit your installation
Unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility
- Review: The 10 Best Wireless Access Points
- Review: The Top 10 Best Ethernet Cables
- What Is An Ethernet Cable And What Does It Do?
- 10 Best CCTV Security IP Cameras For Home & Business
- Review: Best Powerline Adapters In The UK
- Celebrating 20 Years Of Comms Express!
- The Top 10 DrayTek Wireless Access Points
- Best Selling APC Products At Comms Express
- Review: Top 5 Best Performing APC Uninterruptible Power Supply Units (UPS)
- Review: Top 10 Best PDU’s