TREND Networks Depend On Us Promotion

If you install, maintain or troubleshoot data cabling and Ethernet networks, SignalTEK NT allows you to prove the performance up to Gigabit Ethernet transmission rates.

Now includes a Touchscreen
Gigabit performance testing on passive cabling and active networks
Generates PDF test reports to IEEE 802.3ab standard
Simulates VoIP/CCTV/Web/IP video network traffic
Tests connection speed, portID, ping, traceroute, IPv4/IPv6
Supports TREND AnyWARE app
By simulating actual network traffic users are able to test and document network and data cable performance to Gigabit Ethernet standards.

Where system warranties are not required the SignalTEK NT is a cost effective way of proving your copper and fibre networks provide error-free performance.

SignalTEK NT automatically generates test reports in PDF or CSV format. Use the free TREND AnyWARE™ app from TREND Networks to view / send data cable and network test reports to colleagues and clients anywhere.

Gigabit performance testing on passive cabling and active networks
Generates test reports to IEEE 802.3ab standard
Simulates VoIP/CCTV/Web/IP video network traffic
Tests connection speed, port ID, ping, traceroute, IPv4/IPv6
Advanced PoE/PoE+ testing
Customers who have previously purchased SignalTEK II & SignalTEK II FO models can upgrade their tester by purchasing the approved USB Wi-Fi adapter (Edimax EW-7811Un) and downloading the latest software.











Features:

Cable Installation - Network traffic performance test on copper and fibre to IEEE802.3ab standard. Wiremap test for open, shorts, miswires and split pairs to TIA-568 standard. Gigabit link verification for copper and fibre cabling

Cabling - Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic. PoE/PoE+ verification that displays available voltage at device location. Check Ethernet connectivity at device location to 10/100/1000 Mb/s. Verify network configuration (device IP/gateway address/subnet mask). Switch port identification via LLDP/CDP protocols


Troubleshooting & Diagnostics:

Cabling - Distance to fault using TDR technology (copper only). Ability to identify and trace cables with a compatible amplifier probe (62-164). Optical power indication (with compatible SFP modules). Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic. Stress test network before installing bandwidth hungry devices. Port blink to visually trace cable from work area outlet to network switch. Displays port ID of LLDP/CDP enabled switches to eliminate manual cable tracing. 

Identify network connection problems as hardware, network or configuration faults. Ping local network devices and Internet URL’s. Count number of hops between network points with traceroute tests. PoE load testing to confirm available power meets PoE device requirements

Applications - SignalTEK NT is used to quickly prove that Ethernet will work correctly after installation in cable installations such as SOHO or residential cabling where cable certification is cost prohibitive or where the end customer does not require the cable manufacturer’s warranty programs. Workstation or Laptop has an extremely slow network access.

SignalTEK NT can be used to run a simplified transmission test to check network performance. A 100Mb/s LAN environment gets upgraded to 1 Gb/s. SignalTEK NT can be used to check if the existing (old) cabling can support up to 1Gb/s Ethernet. An existing LAN installation gets upgraded to VoIP. SignalTEK NT can be used to check if both the cabling as well as the active components can support VoIP traffic.

After MACs (Moves/Adds/Changes) of active devices, SignalTEK NT can be used to ensure minimum bandwidth requirements are met. In industrial Ethernet applications, SignalTEK NT can be used to verify cabling performance to 100Mb/s or Gigabit requirements. SignalTEK NT can be used to test throughput of an industrial Ethernet LAN

Contents: Includes 1 x display unit, 1 x remote unit, 2 x NiMH battery packs, 2 x patch cables -30cm, Cat 5e STP, 2 x power supply with EU/UK/US adaptors, 1 x USB Wi-Fi adapter, 1 x Quick Reference Guide, 1 x carry case

Depend On Us Rewards Promotion

How to claim:

Purchase a LanTEK IV-S (any model), FiberMASTER Quad OTDR (R240-QIP), SignalTEK 10G FT or Pro (R157001 or R157003) or a SignalTEK NT (R156005).
Complete the purchase information form and submit a copy of your receipt / invoice
Review your gift(s)
The free gift(s) will then be delivered straight to your door
NB: Please note this promotion is valid for all products purchased from the 1st October 2023 and 31st January 2024. Promotional gifts must be redeemed within 90 days of purchase.

FiberMASTER Quad OTDR (850/1300/1310/1550) with SC connectors, Inspection port, Power meter.

Kit Contents:



FiberMASTER Quad OTDR with SC connectors 
Inspection port 
Power meter 
Power Adapter (1) 
USB Cable (1) 
Stylus (2) 
Carry Case (1) 
Hang. Strap (1) 
Cleaning Pen 1.25mm (1) and 2.5mm (1) 
MM 2m Cable LC-SC (1) 
MM 2m Cable SC-SC (1) 
SM 2m Cable LC-SC (1) 
SM 2m Cable SC-SC (1) 
Power Meter Connectors (LC, SC, FC, ST, 1.25mm UNIV, 2.5mm UNIV) 
Quick Ref. Guide (1)


Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

Trend Networks FiberMASTER Series - (UK)

The new FiberMASTER series of fibre optic testers will make it easier and faster to verify, troubleshoot and certify fibre optic cabling.

The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of pounds.

Depend On Us Rewards Promotion

How to claim:

Purchase a LanTEK IV-S (any model), FiberMASTER Quad OTDR (R240-QIP), SignalTEK 10G FT or Pro (R157001 or R157003) or a SignalTEK NT (R156005).
Complete the purchase information form and submit a copy of your receipt / invoice
Review your gift(s)
The free gift(s) will then be delivered straight to your door
NB: Please note this promotion is valid for all products purchased from the 1st October 2023 and 31st January 2024. Promotional gifts must be redeemed within 90 days of purchase.

The new SignalTEK 10G measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot and document network and data cable performance up to 10 Gigabit Ethernet standards.

SignalTEK 10G has built-in Wi-Fi connectivity to connect seamlessly to the free AnyWARE Cloud test management system. AnyWARE Cloud offers pre-configuration to eliminate errors on-site, label printer connectivity to save time and "proof of performance" PDF reports for the clients.


Features

Determine max bandwidth up to 10 Gb/s


Verify Multi-Gig upgrades on existing cabling


Pass/Fail to 1/2.5/5/10Gb IEEE standards


Eliminate PoE guesswork up to 90W


Copper and fibre interfaces up to 10Gb


TREND AnyWARE Cloud and PDF reporting




SignalTEK 10G FT Kit Contents



SignalTEK 10G Display/Remote handsets


2 Hanging Straps


Carry Case


2 Power Supplies


2 2m Cat 6A shielded patch cables


2 Li-ion Batteries


Quick Reference Guides






Tester Details




Comparison Table


Category Solution SignalTEK 10G CT SignalTEK 10G FT SignalTEK 10G NT SignalTEK 10G PRO Copper

Max bandwidth test up to 10Gb/s • • • • Data transmission test 1/2.5/5/10Gb • • • • NbaseT/Multi-Gigabit test 1/2.5/5/10Gb • • • • Wiremap, distance to fault, length • • • • Cable tracing (with compatible probe) • • • • Pass / Fail to copper IEEE standards • • • • PoE

Pass / Fail to PoE IEEE standards • • • • Max power available (up to 90 watts) • • • • Type (af/at/bt) and Class (1 to 8) • • • • Displays voltage and which pairs have PoE • • • • Fibre
(optional)

Optical Tx/Rx power indication • • Max bandwidth test up to 10Gb/s • • Data transmission test 1/10Gb • • Pass / Fail to fibre IEEE standards • • SFP temperature, vendor and model • • Supports SFP/SFP+ (MM&SM) • • Network
(optional)

Switch Speed - 100M, 1G, 2.5G, 5G, 10G • • VLAN, PING, TraceRoute, Hub blink, NetScan • • CDP/LLDP/EDP port information • • Uptime efficiency and 72 hour event log • • Testing with packet loss, jitter and delay • • Prove network performance up to 10G • •


Save £600 with Trade-In


To qualify for Trade-In, the following list of cable certifiers can be traded to qualify for the promotional price:

Valid with Cable IQ, NetXpert LANXpert, LinkRunner, Etherscope, One Touch, NaviTEK, SignalTEK or any cable certifier.

The qualifying tester must be returned to TREND Networks and the serial number provided at time of purchase

Depend On Us Rewards Promotion

How to claim:

Purchase a LanTEK IV-S (any model), FiberMASTER Quad OTDR (R240-QIP), SignalTEK 10G FT or Pro (R157001 or R157003) or a SignalTEK NT (R156005).
Complete the purchase information form and submit a copy of your receipt / invoice
Review your gift(s)
The free gift(s) will then be delivered straight to your door
NB: Please note this promotion is valid for all products purchased from the 1st October 2023 and 31st January 2024. Promotional gifts must be redeemed within 90 days of purchase.

The new SignalTEK 10G measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot and document network and data cable performance up to 10 Gigabit Ethernet standards.

SignalTEK 10G has built-in Wi-Fi connectivity to connect seamlessly to the free AnyWARE Cloud test management system. AnyWARE Cloud offers pre-configuration to eliminate errors on-site, label printer connectivity to save time and "proof of performance" PDF reports for the clients.


Features

Determine max bandwidth up to 10 Gb/s


Verify Multi-Gig upgrades on existing cabling


Pass/Fail to 1/2.5/5/10Gb IEEE standards


Eliminate PoE guesswork up to 90W


Copper and fibre interfaces up to 10Gb


TREND AnyWARE Cloud and PDF reporting






SignalTEK 10G PRO Kit Contents



SignalTEK 10G Display/Remote handsets


2 Hanging Straps


Carry Case


2 Power Supplies


2 2m Cat 6A shielded patch cables


2 Li-ion Batteries


Quick Reference Guides


 

Tester Details




Comparison Table


Category Solution SignalTEK 10G CT SignalTEK 10G FT SignalTEK 10G NT SignalTEK 10G PRO Copper

Max bandwidth test up to 10Gb/s • • • • Data transmission test 1/2.5/5/10Gb • • • • NbaseT/Multi-Gigabit test 1/2.5/5/10Gb • • • • Wiremap, distance to fault, length • • • • Cable tracing (with compatible probe) • • • • Pass / Fail to copper IEEE standards • • • • PoE

Pass / Fail to PoE IEEE standards • • • • Max power available (up to 90 watts) • • • • Type (af/at/bt) and Class (1 to 8) • • • • Displays voltage and which pairs have PoE • • • • Fibre
(optional)

Optical Tx/Rx power indication   •   • Max bandwidth test up to 10Gb/s   •   • Data transmission test 1/10Gb   •   • Pass / Fail to fibre IEEE standards   •   • SFP temperature, vendor and model   •   • Supports SFP/SFP+ (MM&SM)   •   • Network
(optional)

Switch Speed - 100M, 1G, 2.5G, 5G, 10G     • • VLAN, PING, TraceRoute, Hub blink, NetScan     • • CDP/LLDP/EDP port information     • • Uptime efficiency and 72 hour event log     • • Testing with packet loss, jitter and delay     • • Prove network performance up to 10G     • •


Save £600 with Trade-In


To qualify for Trade-In, the following list of cable certifiers can be traded to qualify for the promotional price:

Valid with Cable IQ, NetXpert LANXpert, LinkRunner, Etherscope, One Touch, NaviTEK, SignalTEK or any cable certifier.

The qualifying tester must be returned to TREND Networks and the serial number provided at time of purchase

Depend On Us Rewards Promotion

How to claim:

Purchase a LanTEK IV-S (any model), FiberMASTER Quad OTDR (R240-QIP), SignalTEK 10G FT or Pro (R157001 or R157003) or a SignalTEK NT (R156005).
Complete the purchase information form and submit a copy of your receipt / invoice
Review your gift(s)
The free gift(s) will then be delivered straight to your door
NB: Please note this promotion is valid for all products purchased from the 1st October 2023 and 31st January 2024. Promotional gifts must be redeemed within 90 days of purchase.

LanTEK IV-S 500MHz Cable Certifier:


TIA Category 6A/ ISO Class EA 
LanTEK IV-S Display/Remote handsets
Li-ion Battery (2)
Univ. Power Adapter (2)
Hang. Strap (2)
Quick Ref. Guide
Carry Case
CAT6A RJ45 VisiLINQ Permanent Link Adapters (2)
CAT6A Channel Adapters (2)


Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

LanTEK IV-S (En)
The Most Powerful And Fastest Certifier We've Ever Made

We have launched the new LanTEK IV-S cable certifier, our fastest, most powerful and easy to use copper and fibre cable certifier to date.

Whitestar Solutions Doubles Productivity with LanTEK IV

TREND Networks has been working in partnership with UK-based electrical and data services provider Whitestar Solutions to help them work cost effectively, save time, and even double productivity.

VisiLINQ™ Permanent Link Adapter

Check out how the VisiLINQ™ PLA can save you time and money and increase productivity on site! With a built in flash light, visual & audio indicators for results, and initiate test button, you can do it all in the palm of your hand.

  Depend On Us Rewards Promotion

How to claim:

Purchase a LanTEK IV-S (any model), FiberMASTER Quad OTDR (R240-QIP), SignalTEK 10G FT or Pro (R157001 or R157003) or a SignalTEK NT (R156005).
Complete the purchase information form and submit a copy of your receipt / invoice
Review your gift(s)
The free gift(s) will then be delivered straight to your door
NB: Please note this promotion is valid for all products purchased from the 1st October 2023 and 31st January 2024. Promotional gifts must be redeemed within 90 days of purchase.

LanTEK IV-S 3000MHz Cable Certifier:



TIA Category 8/ ISO Class I/II
LanTEK IV-S Display/Remote handsets
Li-ion Battery (2)
Univ. Power Adapter (2)
Hang. Strap (2)
Quick Ref. Guide
Carry Case
CAT8 RJ45 VisiLINQ Permanent Link Adapters (2)
CAT8 Channel Adapters (2)


Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

LanTEK IV-S (En)
The Most Powerful And Fastest Certifier We've Ever Made

We have launched the new LanTEK IV-S cable certifier, our fastest, most powerful and easy to use copper and fibre cable certifier to date.

Whitestar Solutions Doubles Productivity with LanTEK IV

TREND Networks has been working in partnership with UK-based electrical and data services provider Whitestar Solutions to help them work cost effectively, save time, and even double productivity.

VisiLINQ™ Permanent Link Adapter

Check out how the VisiLINQ™ PLA can save you time and money and increase productivity on site! With a built in flash light, visual & audio indicators for results, and initiate test button, you can do it all in the palm of your hand.

  Depend On Us Rewards Promotion

How to claim:

Purchase a LanTEK IV-S (any model), FiberMASTER Quad OTDR (R240-QIP), SignalTEK 10G FT or Pro (R157001 or R157003) or a SignalTEK NT (R156005).
Complete the purchase information form and submit a copy of your receipt / invoice
Review your gift(s)
The free gift(s) will then be delivered straight to your door
NB: Please note this promotion is valid for all products purchased from the 1st October 2023 and 31st January 2024. Promotional gifts must be redeemed within 90 days of purchase.