Molex Keystone Jacks and Accessories

Molex PowerCat 6A Tool-less Shielded Keystone Jack is designed for support of installations requiring Keystone Jack apertures specifically in work area applications. The jack is also compatible with Molex range of Keystone Jack Patch Panels.

The PowerCat 6A Shielded Keystone jack offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilizing robust die cast zinc alloy jack body housing. The shielded jack is dual colour coded for either 568A or 568B wiring schedules. The toolless design allows for on-site installation without the need for a termination tool.

The PowerCat 6A Shielded Keystone Jack was specifically designed for highspeed 10GB data transmission. The jack is also backwards compatible with Shielded C6 and C5e systems. Our PowerCat 6A shielded system is suitable for the most demanding PoE applications.

Features & Advantages

360° shielding for EMI protection
Tool-less termination process
Dual color coding allows 568A/B wiring
Accommodates 23-26AWG conductors
Protected front labeling feature for additional panel or port identification
Straight cable entry (180°)
Robust die-cast housing
Technical Information

Jack

Grounding contacts: Stainless steel
Housing: Zinc Die-Casting with nickel plating
Contact bracket: Polycarbonate, UL94V-2
Contact material: Phosphor bronze with nickel plating
Contact gold plating: 50 micro-inch gold plating on surface of plug contact area
Wire management cap (IDC-Cap): Polycarbonate, UL94V-2
Operating Life: ? 750 cycles
Mating/Un-mating force: ? 30N
Retention strength: 7.7 kg between jack and plug
Installation temperature: 0°C to 50°C (32°F to 122°F)
Storage temperature: -40°C to 70°C (-40°F to 158°F)
Operating temperature: -10°C to 60°C (14°F to 140°F)
IDC

Housing: Polycarbonate, UL94V-2
Terminals: Phosphor bronze with tin plating
Cable o.d. accommodation: 5.0 mm to 8.5 mm
Operating Life: ? 20 cycles
Environmental Standards

RoHS compliant
REACH compliant
Electrical

Contact resistance: ? 20m?
Insulation Resistance: > 500 M? at 100Vdc, for 60 sec.
Voltage: Contact to contact 1000 Vdc
Voltage rating: 150 V

The unloaded Euromod Keystone Fascia is specifically designed to accept the Molex Keystone Jack product range. The angled design reduces bend cord radius particularly in shallow floor box installations. The fascia is supplied with an integral spring loaded shutter for dust protection and a labelling window facility. The white Euromod Keystone Jack fascia is designed to fit into the white single gang (86 x 86mm) and double gang (86 x 146mm) wall plates, which are manufactured from the same colour matched material.

Important Installation Note:

The unloaded fascia must be snapped into the wall plate before the terminated Keystone Jack is assembled into the fascia.

Features & Advantages

Integral spring loaded shutter
Protected labelling facility
RoHS compliant
25 x 50mm angled fascia
Compatible with Keystone Jacks
Matching single and double gang wall plates
Euromod Keystone Jack fascias are compatible with adapter collar part no's 17-0231-02 and 17-0232-02 when UTP Keystone Jacks are installed. The collars are not compatible these fascias and shielded jacks

The unloaded MOD-SNAP Keystone Fascia is specifically designed to accept the Molex Keystone Jack product range. The angled design reduces bend cord radius particularly in shallow floor box installations. The fascia is supplied with an integral spring loaded shutter for dust protection and a window labeling facility. The product is compatible with the MOD-SNAP wall plate range.

Important Installation Note:

The unloaded fascia must be snapped into the wall plate before the terminated Keystone Jack is assembled into the fascia.

Features & Advantages

38.5 x 25mm angled fascia
Integral spring loaded shutter
Protected labelling facility
RoHS compliant
Compatible with Keystone Jacks