| Product Code: | |
| Options: | |
| Qty: | |
| Unit Price: | £ |
.jpg "Fluke Networks")
| Part No: | FLLIQ-KIT-VFL-FBRLRT |
| Manufacturer No: | LIQ-KIT-VFL-FBRLRT |
| Delivery: | In Stock: 5-7 Days |
 |
The Fluke LIQ-KIT-VFL-FBRLRT LinkIQ Kit with Fiber VFL & Live Fiber Detector combines copper qualification tools with essential fiber inspection capability in a single field kit. It supports technicians working across mixed network environments by bringing together link testing, switch identification, and fiber visibility checks, helping streamline everyday installation and fault isolation tasks without switching between separate devices.
Provides detailed insight into connected infrastructure, including link status and switch-level identification to support accurate configuration checks.
The LinkIQ tester is capable of measuring lengths up to 305 meters (1000 feet) and provides distance to faults such as opens, shorts, and unterminated cable. Using the remote ID allows for a complete wire map of the cable pairs which helps identify miswired and split pairs. The primary cable testing feature of LinkIQtester is the cable performance test which qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s).
It performs these tests viafrequency-based measurements. Using IEEE-standards-based measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link.
Along with the robust cable testing features, the LinkIQ tester also provides detailed information on the nearest connected switch and connectivity testing with IPping. The LinkIQ tester negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name and IPaddress, port number, and VLAN info.
Switch port test shows switch name and IP address, connected port, and VLAN (separate screen) along with advertised speed and duplex settings. If a ping test is configured, the target address and average response time are shown. Scroll down to show Power over Ethernet results. The ping test verifies connectivity to devices on the local network or the internet and supports both IPv4 and v6.
The address of the LinkIQ tester may be set upmanually or through DHCP. Once set, the ping test runs as part of the Autotest when a switch is detected. Results of the ping test include identification andresponse time of each of four pings to the target, the DNS server, and gateway.
While Power over Ethernet makes installation of devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators, and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term PoE is not registered, and there are a variety of non-standards-compliant implementations.
To simplify PoE installation and troubleshooting, the LinkIQ tester shows the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ tester will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure. The LinkIQ tester has been certified by the Ethernet Alliance to IEEE-802.3™ standards for reliable multivendor interoperability
The LinkIQ tester provides complete documentation abilities for the tests it performs. Up to 1,000 results can be given descriptive names and stored and recalled in the tester. Test names and numbers automatically increment as each is saved: Annex B-1, Annex B-2, Annex B-3, etc. which saves time when testing cables in sequence.
Report data may be exported to a PC for documentation purposes. The LinkIQ tester uses LinkWare™ PC, Fluke Networks’ reporting software which supports avariety of testers going back 20 years and is the industry’s leading reporting solution with tens of thousands of active users. LinkWare PC can be used to storethe results as well as generate PDF reports.
Built for on-site use, the kit brings together multiple testing functions into a single carry system for structured and fiber network work.
What's Included:
The Fluke LIQ-KIT-VFL-FBRLRT LinkIQ Kit with Fiber VFL & Live Fiber Detector combines copper qualification tools with essential fiber inspection capability in a single field kit. It supports technicians working across mixed network environments by bringing together link testing, switch identification, and fiber visibility checks, helping streamline everyday installation and fault isolation tasks without switching between separate devices.
Provides detailed insight into connected infrastructure, including link status and switch-level identification to support accurate configuration checks.
The LinkIQ tester is capable of measuring lengths up to 305 meters (1000 feet) and provides distance to faults such as opens, shorts, and unterminated cable. Using the remote ID allows for a complete wire map of the cable pairs which helps identify miswired and split pairs. The primary cable testing feature of LinkIQtester is the cable performance test which qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s).
It performs these tests viafrequency-based measurements. Using IEEE-standards-based measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link.
Along with the robust cable testing features, the LinkIQ tester also provides detailed information on the nearest connected switch and connectivity testing with IPping. The LinkIQ tester negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name and IPaddress, port number, and VLAN info.
Switch port test shows switch name and IP address, connected port, and VLAN (separate screen) along with advertised speed and duplex settings. If a ping test is configured, the target address and average response time are shown. Scroll down to show Power over Ethernet results. The ping test verifies connectivity to devices on the local network or the internet and supports both IPv4 and v6.
The address of the LinkIQ tester may be set upmanually or through DHCP. Once set, the ping test runs as part of the Autotest when a switch is detected. Results of the ping test include identification andresponse time of each of four pings to the target, the DNS server, and gateway.
While Power over Ethernet makes installation of devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators, and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term PoE is not registered, and there are a variety of non-standards-compliant implementations.
To simplify PoE installation and troubleshooting, the LinkIQ tester shows the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ tester will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure. The LinkIQ tester has been certified by the Ethernet Alliance to IEEE-802.3™ standards for reliable multivendor interoperability
The LinkIQ tester provides complete documentation abilities for the tests it performs. Up to 1,000 results can be given descriptive names and stored and recalled in the tester. Test names and numbers automatically increment as each is saved: Annex B-1, Annex B-2, Annex B-3, etc. which saves time when testing cables in sequence.
Report data may be exported to a PC for documentation purposes. The LinkIQ tester uses LinkWare™ PC, Fluke Networks’ reporting software which supports avariety of testers going back 20 years and is the industry’s leading reporting solution with tens of thousands of active users. LinkWare PC can be used to storethe results as well as generate PDF reports.
Built for on-site use, the kit brings together multiple testing functions into a single carry system for structured and fiber network work.
What's Included:
Product data is provided by Icecat, we do not warrant the accuracy of the material above.
