Molex Cat6A Patch Leads

Molex Medical Grade antimicrobial wall plates and patch cord products have been created by incorporating an antibacterial agent (biocide) that can assist in suppressing the growth of bacteria on the surfaces of products when conditions exist where growth can occur. They can assist in keeping surfaces clean and sanitary and can also have an advantage in minimizing the impact on the environment by minimizing diffusion of the agent.

Molex Medical Grade products have been independently tested and comply with ISO 22196:2011. They form a part of an effective sanitization protocol are not intended as replacement.

Features & Advantages

Assists in suppression of the growth of bacteria on wall plates and patch cords
Contemporary design, smooth finished wallplates for ease of cleaning
Modular wall plate footprint allows for Cat 6, Cat 6A and optical fiber fitout
10G performance when installed as a complete PowerCat 6A Shielded System
LS0H Sheath - Patch Cords
Slim anti-snag slip on boots - Patch Cords
RoHS Compliant
Third party tested to ISO 22196:2011
Technical Information

Patch Cords

Cable Conductor Size: 26 AWG stranded copper wire
Screen Material: Aluminum/polyester shield with tinned copper drain wire
Nom. O.D: 6.5mm
Sheath: Low Smoke Zero Halogen (LS0H)
Bend Radius: 8X O.D
Operating Temperature Range: -25°C to +55°C
Commercial Standards

ISO/IEC 11801 2nd Ed Amd 1 Class EA
TIA-568-C.2 Cat 6A
UL 1863
CSA C22.2
ISO 22196:2011
LS0H Sheath: IEC 60332-1
IEC 61034-2
RoHS Compliant

The Molex PowerCat 6A shielded patch cords are key components of the PowerCat 6A shielded end-to-end solution.

Molex PowerCat 6A Patch Cords are designed to support high speed 10GBASE-T networks and are backward compatible with 10/100/1000BASE-T networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6A patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

Features & Advantages

4 pair 26 AWG stranded copper wire
Pre-terminated with RJ45 plugs
Slim clear anti-snag slip on boots
Suitable for EIA 568A or 568B wiring
LS0H sheath
10G Performance when installed as a complete PowerCat 6A Shielded System
Technical Information

Cable

Conductor Size: 26 AWG stranded copper wire
Screen Material: Aluminum/polyester shield with tinned copper drain wire
Nom. O.D.: 6.5mm
Sheath: Low Smoke Zero Halogen (LS0H)
Contact Force: 100g minimum
Bend Radius: 8X O.D.
Operating Temperature:
Installation: 0 to +60°C
Operation: -10 to +75°C
Plug

Minimum operating life: 750 insertion cycles
RJ45 Plug Material: Clear polycarbonate (PC)
Boot Material: Clear polycarbonate (PC)
Contact Plating: 1.27um gold
RJ45 Plug Dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68
Electrical

Max voltage: 150 VAC (max)
Max current: 1.5A @ 25°C