| Product Code: | |
| Options: | |
| Qty: | |
| Unit Price: | £ |
| Part No: | FEDL-HD70 |
| Manufacturer No: | DL-HD70 |
| Delivery: | In Stock: 2-3 Weeks |
 |
DigitaLinx HDMI HDBaseT Extension Set w/ Control
4K 10.2G 70m HDBaseT extension set with RS232, IR, and flexible 2 way PoC
The DigitaLinx DL-HD70 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, bidirectional IR, and RS232 up to 70 meters away using a single twisted pair cable.
Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.
The DL-HD70 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.
| I/O Connections | |
| HDMI | One (1) HDMI Type A Receptacle |
| Twisted Pair | One (1) 8P8C port (Shielded RJ45) |
| 18V DC Power | One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking) |
| IR Input | One (1) 3.5mm TRS Jack |
| IR Output | One (1) 3.5mm TS Jack |
| RS232 | One (1) 3-Pole Euroblock connector |
| Supported Audio and Video | |
| Maximum Video Compatibility | 70 m: Deep Color 36/30/24 Bit at 1080p, 40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz: YCbCr 4:2:0 |
| Video Compliance | HDMI, HDCP 2.2, and CEC (Consumer Electronics Control) |
| Embedded Audio | Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio |
| Input DDC Signal | 5.0 volts p-p (TTL) |
| Input Video Signal | 0.5 to 1.0 volts p-p |
| IR Carrier Frequency Range | 33-55kHz at 5 volts |
| RS232 Baud Rate | Up to 115200 baud |
| HDBaseT Signal Characteristics | |
| Maximum Distance | 70 m |
| Cable Requirements | Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern |
| Bandwidth | 10.2 Gbps |
| Gain | 0 dB – 10 dB at 100 MHz |
| Signal to Noise Ratio (SNR) | > 70 dB at 100 MHz over 100 m |
| Return Loss | < -30 dB at 5 KHz |
| Total Harmonic Distortion (THD) | < 0.005% at 1 KHz |
| Min-Max Signal Level | < 0.3 V – 1.45 Vp-p |
| Differential Phase Error | ±10° at 135 MHz over 100 m |
| Chassis and Environmental | |
| Enclosure | Painted steel |
| Dimensions | 135mm x 74mm x 15mm (5.31 in. x 2.91 in. x 0.59 in.) |
| Shipping Weight | 0.82 kg / 1.8 lbs |
| 9Operating Temperature (Environment) | 0° to 40° C (+32° to +104° F) |
| Operating Temperature (Chassis) | 31° C (88° F) (S); 38° C (100° F) (R) |
| Operating Humidity (Environment) | 20% to 90%, Non-condensing |
| Storage Temperature (Environment) | -10° to +60° C (+14° to +140° F) |
| Storage Humidity (Environment) | 20% to 90%, Non-condensing |
Full specification and details can be found in the PDF file
An owner's manual can be found in the PDF file
An installation guide can be found in the PDF file
DigitaLinx HDMI HDBaseT Extension Set w/ Control
4K 10.2G 70m HDBaseT extension set with RS232, IR, and flexible 2 way PoC
The DigitaLinx DL-HD70 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, bidirectional IR, and RS232 up to 70 meters away using a single twisted pair cable.
Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.
The DL-HD70 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.
| I/O Connections | |
| HDMI | One (1) HDMI Type A Receptacle |
| Twisted Pair | One (1) 8P8C port (Shielded RJ45) |
| 18V DC Power | One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking) |
| IR Input | One (1) 3.5mm TRS Jack |
| IR Output | One (1) 3.5mm TS Jack |
| RS232 | One (1) 3-Pole Euroblock connector |
| Supported Audio and Video | |
| Maximum Video Compatibility | 70 m: Deep Color 36/30/24 Bit at 1080p, 40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz: YCbCr 4:2:0 |
| Video Compliance | HDMI, HDCP 2.2, and CEC (Consumer Electronics Control) |
| Embedded Audio | Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio |
| Input DDC Signal | 5.0 volts p-p (TTL) |
| Input Video Signal | 0.5 to 1.0 volts p-p |
| IR Carrier Frequency Range | 33-55kHz at 5 volts |
| RS232 Baud Rate | Up to 115200 baud |
| HDBaseT Signal Characteristics | |
| Maximum Distance | 70 m |
| Cable Requirements | Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern |
| Bandwidth | 10.2 Gbps |
| Gain | 0 dB – 10 dB at 100 MHz |
| Signal to Noise Ratio (SNR) | > 70 dB at 100 MHz over 100 m |
| Return Loss | < -30 dB at 5 KHz |
| Total Harmonic Distortion (THD) | < 0.005% at 1 KHz |
| Min-Max Signal Level | < 0.3 V – 1.45 Vp-p |
| Differential Phase Error | ±10° at 135 MHz over 100 m |
| Chassis and Environmental | |
| Enclosure | Painted steel |
| Dimensions | 135mm x 74mm x 15mm (5.31 in. x 2.91 in. x 0.59 in.) |
| Shipping Weight | 0.82 kg / 1.8 lbs |
| 9Operating Temperature (Environment) | 0° to 40° C (+32° to +104° F) |
| Operating Temperature (Chassis) | 31° C (88° F) (S); 38° C (100° F) (R) |
| Operating Humidity (Environment) | 20% to 90%, Non-condensing |
| Storage Temperature (Environment) | -10° to +60° C (+14° to +140° F) |
| Storage Humidity (Environment) | 20% to 90%, Non-condensing |
Full specification and details can be found in the PDF file
An owner's manual can be found in the PDF file
An installation guide can be found in the PDF file
