| Product Code: | |
| Options: | |
| Qty: | |
| Unit Price: | £ |
.jpg "Fluke Networks")
| Part No: | FLLIQ-KIT-FTK1475 |
| Manufacturer No: | LIQ-KIT-FTK1475 |
| Delivery: | In Stock: 5-7 Days |
 |
The Fluke LIQ-KIT-FTK1475 LinkIQ Kit & Fiber Verification Kit with Inspection brings together copper qualification, fibre verification, inspection, and troubleshooting tools in one complete package for modern network environments. Designed for technicians working across multimode and single-mode fibre installations, the kit helps identify cabling faults, inspect connector cleanliness, validate switch connectivity, and confirm network performance up to 10 Gig. With portable testing equipment and clear reporting capabilities, it supports efficient installation checks, maintenance tasks, and ongoing infrastructure diagnostics across data centres, office networks, and structured cabling systems.
The LinkIQ™ is capable of measuring lengths up to 1000 feet (305 m) and provides distance to faults such as opens, shorts, and unterminated cable. Using the remote ID allows for a complete wire map of the cable pairs which helps identify miswired and split pairs. The primary cable testing feature of LinkIQ™ is the cable performance test which qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It performs these tests via frequency-based measurements. Using IEEE-standardsbased measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link.
Along with the robust cable testing features, the LinkIQ™ also provides detailed information on the nearest connected switch and connectivity testing with IP ping. The LinkIQ™ negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name and IP address, port number, and VLAN info.
The ping test verifies connectivity to devices on the local network or the internet and supports both IPv4 and v6. The LinkIQ’s address may be set up manually or through DHCP. Once set up, the ping test is run as part of the Autotest when a switch is detected. Results of the ping test include identification and response time of each of four pings to the target, the DNS server and gateway.
While Power over Ethernet makes installation of devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term “PoE” is not registered and there are a variety of nonstandards-compliant implementations as well.
To simplify PoE installation and troubleshooting, the LinkIQ displays the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure. The LinkIQ has been certified by the Ethernet Alliance to IEEE802.3™ standards for reliable multivendor interoperability.
The LinkIQ provides complete documentation abilities for the tests it performs. Up to 1,000 results can be stored in the tester with descriptive names and recalled. Test names and numbers automatically increment as each is saved (“Annex B-1”, “Annex B2”, “Annex B-3”, etc.) saving lots of time when testing cables in sequence.
Report data may be exported to a PC for documentation purposes. The LinkIQ uses
LinkWare™ PC, Fluke Networks’ reporting software which supports a variety of testers going back 20 years and is the industry’s de facto reporting solution with tens of
thousands of active users. LinkWare can be used to store the results as well as generate PDF reports.
The LinkIQ tester verifies cable performance while checking switch details, network speed, VLAN information, and PoE availability. Combined with fibre verification tools, the kit allows technicians to manage both copper and fibre infrastructure using a single equipment set.
The lightweight handheld design allows technicians to move easily between cabinets, patch panels, and work areas. Test results can be transferred to LinkWare PC software for documentation, record keeping, and project reporting.
What's Included
The Fluke LIQ-KIT-FTK1475 LinkIQ Kit & Fiber Verification Kit with Inspection brings together copper qualification, fibre verification, inspection, and troubleshooting tools in one complete package for modern network environments. Designed for technicians working across multimode and single-mode fibre installations, the kit helps identify cabling faults, inspect connector cleanliness, validate switch connectivity, and confirm network performance up to 10 Gig. With portable testing equipment and clear reporting capabilities, it supports efficient installation checks, maintenance tasks, and ongoing infrastructure diagnostics across data centres, office networks, and structured cabling systems.
The LinkIQ™ is capable of measuring lengths up to 1000 feet (305 m) and provides distance to faults such as opens, shorts, and unterminated cable. Using the remote ID allows for a complete wire map of the cable pairs which helps identify miswired and split pairs. The primary cable testing feature of LinkIQ™ is the cable performance test which qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It performs these tests via frequency-based measurements. Using IEEE-standardsbased measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link.
Along with the robust cable testing features, the LinkIQ™ also provides detailed information on the nearest connected switch and connectivity testing with IP ping. The LinkIQ™ negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name and IP address, port number, and VLAN info.
The ping test verifies connectivity to devices on the local network or the internet and supports both IPv4 and v6. The LinkIQ’s address may be set up manually or through DHCP. Once set up, the ping test is run as part of the Autotest when a switch is detected. Results of the ping test include identification and response time of each of four pings to the target, the DNS server and gateway.
While Power over Ethernet makes installation of devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term “PoE” is not registered and there are a variety of nonstandards-compliant implementations as well.
To simplify PoE installation and troubleshooting, the LinkIQ displays the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure. The LinkIQ has been certified by the Ethernet Alliance to IEEE802.3™ standards for reliable multivendor interoperability.
The LinkIQ provides complete documentation abilities for the tests it performs. Up to 1,000 results can be stored in the tester with descriptive names and recalled. Test names and numbers automatically increment as each is saved (“Annex B-1”, “Annex B2”, “Annex B-3”, etc.) saving lots of time when testing cables in sequence.
Report data may be exported to a PC for documentation purposes. The LinkIQ uses
LinkWare™ PC, Fluke Networks’ reporting software which supports a variety of testers going back 20 years and is the industry’s de facto reporting solution with tens of
thousands of active users. LinkWare can be used to store the results as well as generate PDF reports.
The LinkIQ tester verifies cable performance while checking switch details, network speed, VLAN information, and PoE availability. Combined with fibre verification tools, the kit allows technicians to manage both copper and fibre infrastructure using a single equipment set.
The lightweight handheld design allows technicians to move easily between cabinets, patch panels, and work areas. Test results can be transferred to LinkWare PC software for documentation, record keeping, and project reporting.
What's Included
Product data is provided by Icecat, we do not warrant the accuracy of the material above.
