TP-Link Media Converters

The MC1400 14-Slot Rack-mount Chassis is designed to centralize and streamline your media converter setup. It supports up to 14 TP-LINK Media Converters, providing a compact, efficient power supply solution that reduces cable clutter and saves space. Its robust design ensures continuous fiber communication with optional redundant power supply and Hot-Swapping capabilities, while internal cooling fans enhance stability and device longevity.

Key Features of TP-Link MC1400 Accommodates 14 TP-LINK Media Converters in one chassis
Optional redundant power supply for continuous operation
Hot-Swapping support for converters and power modules
Internal dual cooling fans for stable performance and extended device life
Designed for Efficiency By integrating multiple media converters into a single rack-mount chassis, the MC1400 minimizes the space required and simplifies power management in network environments.

Reliable Operation The chassis supports redundant power supply options and hot-swappable components, ensuring that your fiber network remains operational without downtime during maintenance or upgrades.

Cooling Equipped with two internal cooling fans, the chassis maintains optimal operating temperatures to protect your devices and prolong their service life.

The MC220L is a media converter designed to convert 1000BASE-SX/LX fibre to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX standards, the MC220L is designed for use with multi-mode/single-mode fibre cable utilising the LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fibre and 1310nm on both transmitting and receiving data when adopting single-mode.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19 inch system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC220L will transmit at extended fibre optic distances utilising multi-mode fibre up to 0.55 kilometres and 10 kilometres when utilising single-mode fibre.

Key Features of TP-Link MC220L Converts between fiber (SFP) and copper (RJ45) at gigabit speeds
Supports hot-swappable SFP modules for multi-mode or single-mode fiber
Compact design suitable for standalone use or chassis installation
Auto MDI/MDIX support on RJ45 port for flexible cabling
LED indicators for power and link status
Low power consumption, lightweight, and easy to deploy
Technical Details Supports IEEE 802.3ab and IEEE 802.3z standards, with a 1 x SFP port and 1 x RJ45 port. Maximum fiber distance varies with SFP module: up to 0.55 km for multi-mode, 10 km for single-mode. Powered via a 9V/0.6A adapter with a maximum consumption of 1.7W. Operating temperature ranges from 0°C to 40°C, with storage tolerance from -40°C to 70°C.

Applications Use the MC220L to extend network coverage over fiber, or connect fiber backbones to standard Ethernet devices. It's suitable for office buildings, campuses, and locations where fiber reaches but only copper connections are available for devices.

TL-FC311B-2 is a gigabit media converter, providing a gigabit RJ-45 port and a gigabit SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.

Key Features of TP-Link FC311B-2 1× 10/100/1000Mbps Auto-Negotiation RJ45 port supports Auto-MDI/MDIX
Auto-negotiation of Half-Duplex/Full-Duplex transfer mode
Adopts WDM technology, transmitting and receiving data on one single fiber
Extends fiber distance up to 2 km
How This Product Works

TL-FC311B-2 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 2 km with only a single mode fiber, which saves half of the cable deployment cost for customers.

TL-FC311B-2 transmits data at 1310 nm wavelength and receives data at 1550 nm wavelength on optical fiber. Therefore, the terminal device used in conjunction with the TL-FC311B-2 should send data at a wavelength of 1550 nm and receive data at a wavelength of 1310 nm. TP-Link another media converter TL-FC311A-2 is one of the products that can cooperate with TL-FC311B-2.

Other Features

Besides, this media converter can be used as a standalone device (no rack required) or used with TP-Link's TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.

The MC100CM is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fibre cable utilising the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Key Features of TP-Link MC100CM Complies with 802.3u 10/100Base-TX, 100Base-FX standards
Link Fault Passthrough and Far End Fault minimise the loss caused by link failure timely
Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
Extends fibre distance up to 2km
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19 inch system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC100CM will transmit at extended fibre optic distances utilising multi-mode fibre up to 2 kilometres.

The MC110CS is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fibre cable utilising the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Key Features of TP-Link MC110CS Complies with 802.3u 10/100Base-TX, 100Base-FX standards
Link Fault Passthrough and Far End Fault minimise the loss caused by link failure timely
Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
Extends fibre distance up to 20km
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19 inch system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC110CS will transmit at extended fibre optic distances utilising single-mode fibre up to 20 kilometres.

TL-FC111B-20 is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.

Key Features of TP-Link TL-FC111B-20 Complies with 802.3u 10/100Base-TX, 100Base-FX standards
Auto-negotiation of Half-Duplex/Full-Duplex transfer mode
Adopts WDM technology, transmitting and receiving data on one single fiber
Extends fiber distance up to 20 km
How This Product Works TL-FC111B-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20 km with only a single mode fiber, which saves half of the cable deployment cost for customers. TL-FC111B-20 transmits data at 1310nm wavelength and receives data at 1550nm wavelength on optical fiber.

Therefore, the terminal device used in conjunction with the TL-FC111B-20 should send data at a wavelength of 1550nm and receive data at a wavelength of 1310nm. TP-Link another media converter TL-FC111A-20 is one of the products that can cooperate with TL-FC111B-20.

Other Features Besides, this media converter can be used as a standalone device (no rack required) or used with TP-Link's TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.

The MC111CS is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fibre cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fibre cable utilising the SC-Type connector.

The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK's media converter MC112CS is just one of the examples to cooperate with MC111CS.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19 inch system chassis, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilising single-mode fibre up to 20 kilometres.

Key Features of TP-Link MC111CS Complies with 802.3u 10/100Base-TX, 100Base-FX standards
Link Fault Passthrough and Far End Fault minimise the loss caused by link failure timely
Adopts WDM technology, transmitting and receiving data on one single fiber
Extends fibre distance up to 20km
Fibre Connectivity Designed for long-distance communication, the converter uses single-mode fibre and WDM wavelengths to reduce fibre requirements while maintaining stable transfer performance.

Practical Deployment Ideal for linking remote network points where copper cannot reach, it integrates easily into existing setups with its plug-and-play design.

The MC210CS is a media converter designed to convert 1000BASE-LX fibre to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX standards, the MC210CS is designed for use with single-mode fibre cable utilising the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19 inch system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fibre optic distances utilising single-mode fibre up to 15 kilometres.

Key Features of TP-Link MC210CS Complies with IEEE 802.3ab and IEEE 802.3z
Provides switch configuration of Force /Auto transfer mode for FX port
Extends fibre distance up to 15km
Single-Mode Connectivity This media converter uses a 1310 nm single-mode SC interface, enabling stable, long-range transmission ideal for building links and campus environments.

Copper-to-Fiber Bridging The RJ45 Gigabit port integrates smoothly with existing copper networks, allowing fiber segments to be introduced without reworking core infrastructure.

Fault Detection Support Built-in fault monitoring features help maintain consistent performance and assist with identifying disruptions across the link.

Energy-Conscious Operation Low power draw and compact hardware make the device suitable for installations where efficiency and minimal heat output are required.

The MC112CS is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fibre cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fibre cable utilising the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINK's media converter MC111CS is just one of the examples to cooperate with MC112CS.

Key Features of TP-Link MC112CS Complies with 802.3u 10/100Base-TX, 100Base-FX standards
Link Fault Passthrough and Far End Fault minimise the loss caused by link failure timely
Adopts WDM technology, transmitting and receiving data on one single fiber
Extends fibre distance up to 20km
Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilising single-mode fibre up to 20 kilometres.

The MC200CM is a media converter designed to convert 1000BASE-SX fibre to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fibre cable utilising the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19 inch system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fibre up to 0.55 kilometres.

Key Features of TP-Link MC200CM 1× 10/100/1000Mbps Auto-Negotiation RJ45 port supporting Auto-MDI/MDIX
Complies with IEEE 802.3ab and IEEE 802.3z
Provides switch configuration of Force /Auto transfer mode for FX port
Extends fibre distance up to 0.55km
Installation and Use Plug-and-play design allows easy setup without additional software. Status LEDs provide real-time link and power information, and the device can be deployed as a standalone unit or mounted in a rack with multiple converters for larger network setups.

Fiber to Ethernet Connectivity The MC200CM bridges multimode fiber connections to copper Ethernet devices, making it ideal for linking buildings or extending a fiber backbone to switches, routers, or other network devices. Auto-negotiation ensures compatibility with a wide range of network equipment.

The TP-Link TL-FC1420 14-Slot Media Converter Chassis is a 2U, 19-inch rack-mount unit designed to centralize and power up to 14 media converters. With hot-swap capability and optional redundant power, it allows network setups to stay functional while managing multiple fiber connections efficiently. Built-in cooling fans and over-current protection ensure consistent operation, making it a practical addition for data centers, telecom rooms, or any network rack requiring multiple media converters.

Key Features of TP-Link FC1420 Optional redundant power supply to ensure non-stop reliable operation
Hot-Swappable; easy & quick replacement of converter
Mounted two cooling fans for better ventilation
14 bays to house up to 14 media converters
Design and Compatibility The chassis is built for 19-inch racks, with dimensions of 482 × 309 × 86 mm. It is compatible with TL-FC series media converters and works with dedicated redundant power modules to maintain network uptime.

Power and Cooling Each slot delivers 5 V DC at 0.6 A, powered by a 100–240 V AC input. Dual cooling fans provide airflow to keep all installed converters at stable temperatures during continuous operation.

Operational Considerations Designed for environments requiring multiple fiber connections, it simplifies power management and reduces cable clutter. Hot-swap capability allows converters to be replaced without interrupting other units, and the optional redundant power supply increases reliability in critical setups.

How This Product Works Continuous operation is of great importance to fiber communication, so the chassis is equipped with optional redundant power supply and Hot-Swapping function which allows installing/removing the converter without powering off the chassis. Moreover, to stabilize the performance and extend the lifetime, two cooling fans are installed internally. Together with FC series Gigabit / Fast Ethernet media converters, TL-FC1420 is the ideal solution for your media conversion network.

* For TP-Link Media Converters, TL-FC1420 supports TL-FCXXX ver:1.0 and above.