M611, BMP61 & BMP71 Labels

Product Details

DuraSleeve® markers for the BMP61 printers. Brady DuraSleeve® markers create a durable legend. The DuraSleeve wire marking system provides printable inserts that can easily be inserted into a clean carrier. The legend can be changed before or after termination.

Product Features

Brady Material Type: Polyethylene
Brady Material No.: B-7597
Finish: Matt
Adhesive: Permanent Acrylic
Printer Compatibility: BMP61, BMP71
Print Technology: Thermal Transfer
Resistance Properties: Humidity-resistant, Low Temperature-resistant, UV-resistant
Application(s): Wire and cable labelling

Product Details

Self-Laminating Polyester (B-461) is a clear film with a matte white printable zone ideal for cables, laboratory ID or general labeling where graphics need to be protected.

Self-Laminating Polyester has a permanent acrylic adhesive and is thermal transfer printable
Good print smudge resistance, solvent resistance and high/low temperature performance
Service temperature of -320 to 230° F (-196 to 110° C)
Equivalent for M610 and M611 printers: M6-74-461
A ribbon is required to print this material. Use Part Number M61-R4310 for the BMP®61 Label Printer or M71-R4300 for the BMP®71 Label Printer
Product Features

Brady Material Type: Self-laminating Polyester
Brady Material No.: B-461
Finish: Matt
Adhesive: Permanent Acrylic
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Chemical-resistant, Low Temperature-resistant, Smear-resistant
Application(s): Laboratory labelling; Self-laminating, Excellent abrasion and smudge resistance

Product Details

Labels for the BMP61 Thermal Transfer Portable Printers. These parts can also be printed on the BMP™71 Label Printer provided the roll adapter (M71-ADAPT) is used.

Product Features

Brady Material Type: Tamper-resistant Vinyl
Brady Material No.: B-7351
Finish: Satin
Adhesive: Permanent Acrylic
Surface: For smooth & textured/rough surfaces
Printer Compatibility: BMP61, BMP71
Print Technology: Thermal Transfer
Label Properties: Tamper-evident
Resistance Properties: Chemical-resistant, Humidity-resistant, Low Temperature-resistant, UV-resistant, Weather-resistant
Application(s): General identification, General Laboratory Identification, Tamper Seals

Product Details

Labels for the BMP61 Thermal Transfer Portable Printers. These parts can also be printed on the BMP™71 Label Printer provided the roll adapter (M71-ADAPT) is used.

Product Features

Brady Material Type: Tamper-resistant Vinyl
Brady Material No.: B-7351
Finish: Satin
Adhesive: Permanent Acrylic
Surface: For smooth & textured/rough surfaces
Printer Compatibility: BMP61, BMP71
Print Technology: Thermal Transfer
Label Properties: Tamper-evident
Resistance Properties: Chemical-resistant, Humidity-resistant, Low Temperature-resistant, UV-resistant, Weather-resistant
Application(s): General identification, General Laboratory Identification, Tamper Seals

Product Details

Brady DuraSleeve® printable inserts create a durable legend. The rigid construction of the DuraSleeve® wire marking system provides inserts that can easily be inserted into a clean carrier. The legend can be changed before or after termination.

Product Features

Brady Material Type: Vinyl
Brady Material No.: B-7696
Finish: Gloss
Printer Compatibility: BMP61, BMP71
Print Technology: Thermal Transfer
Label Properties: Heat Shrink
Resistance Properties: Chemical-resistant, Corrosion-resistant, Humidity-resistant, UV-resistant, Weather-resistant
Application(s): Wire and cable labelling

Product Details

Durable Polyester (B-490) markers are designed for use in laboratory identification applications such as vials, centrifuge, tubes, test tubes, straws and slides.

B-490 labels can be applied to frozen surfaces including glass and polypropylene stored in liquid nitrogen when wrapped around itself by at least 1/8"
White polyester material has a permanent acrylic adhesive and is thermal transfer printable
Good print smudge resistance, solvent resistance and high/low temperature performance of -320 to 212° F (-196 to 100° C)
Equivalent for M610 and M611 printers: M6-78-490
A ribbon is required to print this material. Use Part Number M61-R4310 for the BMP®61 Label Printer / BradyPrinter M611 Mobile Label Printer or M71-R4300 for the BMP®71 Label Printer
Product Features

Brady Material Type: FreezerBondz™ Polyester
Brady Material No.: B-490
Finish: Matt
Adhesive: Permanent Acrylic
Printer Compatibility: BMP61, BMP71 (with media adapter), M611
Print Technology: Thermal Transfer
Label Properties: Aggressive Adhesive, Low Temperature, Permanent Adhesive
Resistance Properties: Chemical-resistant, Smear-resistant, UV-resistant, Weather-resistant
Application(s): Laboratory labelling; Cryo Vials, General Laboratory Identification, Vials

Product Details

Permanent or repositionable: once applied, B-498 CleanLift® Series Vinyl Cloth is there to stay… unless you want to change it.

The adhesive and cloth backing offers excellent holding power, yet allow for clean removal and repositioning
Sticks to any clean, dry surface
Specially formulated topcoat for excellent print quality
Semi-gloss finish for crisp, clean look
Product Features

Brady Material Type: Vinyl Cloth
Brady Material No.: B-498
Finish: Semi-gloss
Adhesive: Repositionable Rubber
Surface: For smooth & textured/rough surfaces
Printer Compatibility: BMP61, BMP71 (with media adapter), M611
Print Technology: Thermal Transfer
Label Properties: Repositionable
Resistance Properties: Abrasion-resistant, Chemical-resistant, Corrosion-resistant, Humidity-resistant, UV-resistant, Weather-resistant
Application(s): Asset tracking, Barcode labelling, Circuit board labelling, Component and equipment labelling, Data and telecommunications labelling, Electrical labelling, General identification, Wire and cable labelling

Product Details

Labels for the BMP61 Thermal Transfer Portable Printers. Please Note: This material is UL, CSA & AGA approved with its respective ribbon. See the Recommended Ribbon Series for the appropriate ribbon to use. These parts can also be printed on the BMP™71 Label Printer provided the roll adapter (M71-ADAPT) is used.

Product Features

Brady Material Type: Metallised Polyester
Brady Material No.: B-428 (matt finish), B-435 (gloss finish), B-486B (matt finish)
Adhesive: Permanent Acrylic
Surface: For smooth & textured/rough surfaces
Printer Compatibility: BMP61, BMP71
Print Technology: Thermal Transfer
Label Properties: Metallic, Permanent Adhesive
Resistance Properties: Abrasion-resistant, Chemical-resistant, Corrosion-resistant, Humidity-resistant, UV-resistant, Weather-resistant
Application(s): Asset tracking, Barcode labelling, Circuit board labelling, Component and equipment labelling, Data and telecommunications labelling, Electrical labelling, General identification, Inventory and inspection labelling

Product Details

Engraved Plate Replacement labels for the BMP61 Thermal Transfer Portable Printers. These parts can also be printed on the BMP71 Label Printer provided the roll adapter (M71-ADAPT) is used.

Product Features

Brady Material Type: Polyethylene Foam Laminate Polyester
Brady Material No.: B-7593
Adhesive: Permanent Acrylic - Foam Backed
Finish: Gloss
Printer Compatibility: BMP61, BMP71
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, High Temperature-resistant, Humidity-resistant, Low Temperature-resistant, UV-resistant, Weather-resistant
Application(s): Data and telecommunications labelling, Electrical labelling, General identification

Product Details

Labels for the BMP61 Thermal Transfer Portable Printers. Please Note: This material is UL approved with its respective ribbon. See the Recommended Ribbon Series for the appropriate ribbon to use. These parts can also be printed on the BMP™71 Label Printer provided the roll adapter (M71-ADAPT) is used.

Product Features

Brady Material Type: Nylon Cloth
Brady Material No.: B-499
Adhesive: Permanent Acrylic
Finish: Matt
Surface: For smooth, textured/rough or Highly textured/Low surface energy surfaces
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Chemical-resistant, Humidity-resistant, Low Temperature-resistant, UV-resistant, Weather-resistant
Application(s): Laboratory labelling; Centrifuges, Cryo Tubes, Eppendorf Tubes, General Laboratory Identification, PCR Tubes, Tubes, Vial Tops, Vials

Product Details

These Heatex® markers contain no added halogens and offers excellent fire safety characteristics combined with minimal smoke emission.

Product Features

Brady Material Type: Thermoplastic Polyether Polyurethane
Brady Material No.: B-7643
Finish: Matt
Printer Compatibility: BMP61, BMP71
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Chemical-resistant, Humidity-resistant
Application(s): Data and telecommunications labelling, Wire and cable labelling

Product Details

Tags for the BMP61 Thermal Transfer Portable Printers. Please Note: This material is UL & CSA approved with its respective ribbon. See the Recommended Ribbon Series for the appropriate ribbon to use. These parts can also be printed on the BMP™71 Label Printer provided the roll adapter (M71-ADAPT) is used.

Multi-purpose tag that can be used for a variety of applications including identification of multi-conductor cables, inventory, equipment, lockout, safety warning repair and work-in-progress. Extremely tear resistant and superior cold-weather tag.

Cross-laminated polyethylene provides extreme tear resistance and excellent cold-weather performance.

Product Features

Brady Material Type: Polyethylene
Brady Material No.: B-109
Finish: Matt
Printer Compatibility: BMP61, BMP71
Print Technology: Thermal Transfer
Resistance Properties: Chemical-resistant, Humidity-resistant, Tear-resistant, UV-resistant, Weather-resistant
Application(s): Data and telecommunications labelling, Inventory and inspection labelling, Lockout tagout, Safety identification, Wire and cable labelling