D-Link PoE Switches

Fast. Compact. Convenient.

The D-Link DGS-1005P 5-Port Desktop Gigabit PoE+ Switch enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and IP phones to the network. Built with home and small business users in mind, the DGS-1005P is compact and operates silently, making it ideal for most rooms and offices.

5x Gigabit Ethernet ports (4x PoE+ ports)
PoE+, 60W power budget
10 Gbps switching fabric capacity
Plug & Play simplicity for easy installation
2-Year D-Link Warranty
Gigabit Performance

The DGS-1005P features plug-and-play installation and requires no configuration.

Automatic MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1005P maximises network performance while minimising the transmission of bad network packets.

Power over Ethernet+

The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE 802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60 W.

You can connect compatible devices to the DGS-1005P without using an additional power supply. This allows you to save on cabling and power supplies and to install devices on locations without immediate access to power outlets.

Green Technology

The DGS-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection.

EEE adjusts the power consumption of the switch based on network utilisation, reducing energy use during periods of inactivity. Link status detection powers down unused ports, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch.

Compact and Silent

The compact design of the DGS-1005P allows placement in most locations, including those where space is at a premium.

The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms.

The DGS-1008P PoE Gigabit Desktop switch provides a cost-effective way for SOHO and SMB to benefit from the Power over Ethernet (PoE) technology by allowing users to power up devices such as wireless Access Points, network cameras or IP phones directly from the network cables. The DGS-1008P is equipped with Gigabit ports for faster speeds, and integrates D-Link's Green Ethernet technology to save power when the switch is not in use. Its fanless design makes it completely silent so it is ideal for offices, libraries or meeting rooms.

Plug and Play operation 4 PoE ports Gigabit speed Non-blocking architecture Fanless, silent operation Quality of Service (QoS) queues Cable diagnostics function Safety function to prevent PoE overloads Green Ethernet technology Plug and Play PoE (Power over Ethernet)

The first four ports of the DGS-1008P support the IEEE 802.3af PoE standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimise the clutter of extra power supplies. The switch will automatically detect the power that a connected PoE device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected PoE overload, protecting both the switch and the connected device.

Cable diagnostics function

Every time the DGS-1008P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems.

QoS (Quality of Service)

Despite being an unmanaged, Plug and Play switch, the DGS-1008P is able to classify network traffic by assessing the existing 802.1p and DSCP fields in the Ethernet frames and IP packets respectively, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality.

Power-saving technology

The DGS-1008P is part of D-Link Green™, D-Link's eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the Green Ethernet technology, which can save a substantial amount of energy by detecting the connected cable lengths, adjusting the power accordingly; and the port status, putting them in lo -power, stand-by mode when no network traffic is detected. Thanks to these power reductions, we have been able to remove the fans in the DGS-1008P's design, making it completely silent and dramatically increasing its lifespan.

The D-Link DGS-1100-08PV2/B is an 8-Port Gigabit PoE Smart Managed Switch engineered for small businesses seeking simplified network control with Power over Ethernet capabilities. Combining smart management functions with energy-efficient operation, this model delivers dependable performance and silent operation in a compact, fanless design. It’s an ideal solution for powering IP cameras, VoIP phones, and wireless access points without the need for additional power infrastructure.



Key Features of DGS-1100-08PV2/B: 8 x 10/100/1000BASE-T PoE ports with a 64W PoE budget
Compliant with IEEE 802.3af/at PoE standards
Fanless design for completely silent operation
Supports VLAN, QoS, IGMP Snooping, and Loopback Detection
Surge protection on all ports (6kV)
Web-based management and SmartConsole utility
Energy-efficient Ethernet (EEE) support per IEEE 802.3az




Reliable PoE Performance The DGS-1100-08PV2/B delivers up to 64 watts of total PoE power, allowing you to connect and power devices such as IP cameras and wireless APs directly through the Ethernet cable, reducing the need for separate power supplies.

Silent and Compact Deployment Designed with a fanless chassis, this switch operates silently and can be deployed in noise-sensitive environments such as meeting rooms, retail locations, or surveillance setups.

Simple Network Management Administrators can manage the switch using a web-based GUI or D-Link’s SmartConsole utility. Features like VLAN segmentation, Quality of Service prioritization, and loopback detection allow for quick setup and optimized traffic flow.

Built-in Network Security Equipped with essential security tools including Storm Control and Static MAC, the DGS-1100-08PV2/B helps protect against network flooding and unauthorized access.

Power-Saving Functionality This switch adjusts power consumption based on port status and cable length, reducing energy use without compromising performance. It supports IEEE 802.3az Energy Efficient Ethernet for smarter, greener networking.

The D-Link DGS-1010MP 10-Port Gigabit PoE Switch is built for small offices and enterprise-level networks that demand performance, flexibility, and quiet operation. Designed to support Power over Ethernet (PoE) devices like wireless access points, IP phones, and IP cameras, it provides robust connectivity without requiring additional power infrastructure. This fanless, compact switch is ideal for deployments where space, efficiency, and minimal noise are critical.

Key Features 8 PoE ports supporting IEEE 802.3at, delivering up to 30W per port
Total PoE budget of 125W for powering multiple devices
Plug and play functionality with Auto MDI/MDI-X and Auto-Negotiation
One Gigabit Ethernet uplink and one SFP uplink for high-speed connectivity
Fanless, silent design suitable for quiet workspaces
Compact 11” form factor with optional 1U rack-mount compatibility
Energy-efficient technology (IEEE 802.3az) for reduced power consumption
Limited Lifetime Warranty (USA only; conditions apply)
Power Over Ethernet Convenience With eight PoE-enabled ports, the DGS-1010MP allows direct powering of connected devices without the need for separate electrical wiring. This simplifies installations, especially in locations lacking nearby power outlets, and reduces setup costs significantly.

Smart and Seamless Performance Enjoy quick deployment with its plug-and-play design and intelligent port functionality. The switch senses the link speed of connected devices and adjusts automatically for optimal throughput, minimizing packet loss with store-and-forward switching technology.

Designed for Versatility The compact chassis fits easily into tight workspaces or mounts in a standard 19" rack. The fanless build ensures it runs silently, making it perfect for use in populated areas without adding distracting noise to the environment.

Energy Savings Built In Thanks to support for IEEE 802.3az Energy-Efficient Ethernet, the switch actively lowers power usage when network traffic is low by putting unused ports into sleep mode—helping businesses reduce energy expenses.

Trusted Reliability Backed by D-Link’s Limited Lifetime Warranty (USA only), the DGS-1010MP reflects a commitment to reliable performance and customer satisfaction. Note: Warranty is only valid when purchased through authorized US resellers.

Gigabit Connection for Home

Something of a powerhouse when it comes to Power-over-Ethernet switches, this compact beauty offers PoE to 802.3af/at standard across all eight Gigabit Ethernet ports, at up to 30 Watts per port with a power budget total of 140 Watts. Which, put simply, means you can power devices such as access points, IP phones and video surveillance cameras simply by plugging them in with an Ethernet cable – no additional power required

Features

8x Gigabit Ethernet ports (8 x PoE+ ports)
140W power budget
16 Gbps switching fabric capacity
Plug & play simplicity for easy installation
2-Year D-Link Warranty
Superior Performance

No configuration is required and installation is quick and easy. Support for Auto MDI/MDI-X on all ports eliminates the need for crossover cables when connecting to another switch. Auto- Negotiation on each port senses the link speed of a network device (10, 100 or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. The switch has been designed without fans ensuring silent operation wherever it is installed. With wire-speed filtering and store-and-forward switching, the DGS-1008MP maximises network performance while minimising the transmission of bad network packets.





Conserve Energy

DGS-1008MP switches feature both D-Link Green 3.0 Technology and IEEE802.3az Energy Efficient Ethernet (EEE) to cut operating costs without sacrificing operational performance or functionality. With D-Link Green technology, the switches constantly monitor the link status and network utilisation of every port. The switches also automatically detect cable length and can reduce transmission power usage for shorter cables. By pairing EEE capable devices with DGS-1008MP switches organisations can drastically reduce power consumption by automatically putting ports into a sleep mode when not being used.

Power Over Ethernet+

The DGS-1008MP features 8 x 10/100/1000BASE-T ports that support the IEEE 802.3at PoE+ protocol. Each of the 8 PoE+ ports can supply up to 30 watts with a total PoE power budget of 140 watts. PoE is especially suitable for devices that are far from power outlets or when you want to minimise the clutter of extra cables.

Get Love2Shop Vouchers with this Product Fill in this form to get your Love2Shop voucher when you purchase this product

D-Link’s DGS-1210-10P Gigabit PoE Smart+ Switch with 2 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility. 

The DGS-1210-10P uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance and features a fanless design that allows for quieter operation and helps to extend the device’s lifetime.

The DGS-1210-10P is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-10P is a Smart PoE+ switch with a power budget of 65W that provides 8 PoE-enabled ports power of up to 30 W each. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-10P: 8 x 1000Base-T 802.3at PoE+ 2 x 1GbE SFP
Fanless 65W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX

DGS-1210-08P DGS-1210-10 DGS-1210-10P DGS-1210-10MP Form Factor Desktop/ Rackmount Desktop/ Rackmount Desktop/ Rackmount Desktop/ Rackmount Switching Capacity 20 Gbps 20 Gbps 20 Gbps 20 Gbps 100M/1G Copper  (RJ-45) Ports 8 8 8 8 1G SFP Fibre Ports  2 2 2 2 PoE/PoE+ Ports 8 N/A 8 8 PoE Standard 802.3af N/A 802.3af/ 802.3at  802.3af/ 802.3at  PoE Budget 45 W N/A 65 W 130 W PoE Capable Ports Ports 1 to 8: Up to 15.4 W N/A Port 1 to 8 (30 W max. per PoE port) Port 1 to 8 (30 W max. per PoE port) Dimensions 280 x 180 x 44 mm 280 x 126 x 44 mm 280 x 180 x 44 mm 330 x 180 x 44 mm

D-Link’s DGS-1210-08P Gigabit PoE Smart+ Switch with 2 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility.

The DGS-1210-08P uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance and features a fanless design that allows for quieter operation and helps to extend the device’s lifetime.

The DGS-1210-08P is a PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-08P is a Smart PoE switch with a power budget of 45W that provides 8 PoE-enabled ports power of up to 15.4 W each. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

Features:

Easily manage your entire network with the Web GUI or D-Link Network Assistantusing features like automatic switch discovery, batch operations, and more
Innovative Safeguard Engine, ACL, and ARP Spoofing Prevention protect your network from malicious attacks and illegal access
Range of D-Link Green Technology features help save energy usage automatically and reduce costs, without sacrificing performance
DGS-1210-08P: 8 x 1000Base-T 802.3af PoE 2 x 1GbE SFP
Fanless 45W PoE budget
Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.


Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorised IP assignment.



DGS-1210-08P DGS-1210-10 DGS-1210-10P DGS-1210-16 Form Factor Desktop/ Rackmount Desktop/ Rackmount Desktop/ Rackmount Desktop/ Rackmount Switching Capacity 20 Gbps 40 Gbps 40 Gbps 40 Gbps 100M/1G Copper  (RJ-45) Ports 8 8 8 16 1G SFP Fibre Ports  2 2 2 4 PoE/PoE+ Ports 8 N/A 8 N/A PoE Standard 802.3af N/A 802.3af/ 802.3at  N/A PoE Budget 45 W N/A 78 W N/A PoE Capable Ports Ports 1 to 8: Up to 15.4 W N/A Port 1 to 8 (30 W max. per PoE port) N/A Dimensions 280 x 180 x 44 mm 280 x 126 x 44 mm 280 x 180 x 44 mm 280 x 180 x 44 mm

The D-Link DMS-108P/B is built for high-performance networking where speed and power delivery are equally important. With eight 2.5G ports and advanced PoE++ support, it provides seamless connectivity for modern devices such as Wi-Fi 6 access points, surveillance systems, and high-demand workstations. Designed for quiet operation and simple deployment, it brings reliable performance into compact, noise-sensitive spaces.

Key Features Eight 2.5G Multi-Gigabit ports for faster connections across devices
IEEE 802.3af/at/bt PoE support with up to 90W per port and 230W total power budget
Fanless, energy-efficient design with durable metal housing
Plug-and-play operation with auto configuration
Traffic handling via IGMP snooping, QoS, and flow control
Small Size, Big Power The DMS-108P with IEEE 802.3bt (PoE++) delivers up to 90W per port with a 230W total power budget, enabling high-performance devices without additional power supplies. Ideal for Wi-Fi 6 access points, PTZ cameras, kiosks, smart LED lighting systems, and much more. PoE++ simplifies installation, reduces cabling costs, and enhances energy efficiency.

Smarter Multicast, Smoother Performance The DMS-108P enables IGMP Snooping to intelligently manage multicast traffic, ensuring data reaches only the devices that require it. This reduces bandwidth congestion, improves video streaming and VoIP performance, and strengthens support for IPTV and surveillance systems.

Prioritize Traffic for Reliable Delivery With the DMS-108P, network traffic is streamlined through 802.1p Quality of Service (QoS). The switch automatically organizes and prioritizes time-sensitive and critical data for smooth delivery, enabling buffer-free video playback as well as jitter-free voice and video calls.

The D-Link DGS-1018P/B is a straightforward 18-port Gigabit PoE+ switch built for installations where dependable power delivery, fiber uplink flexibility, and quick deployment matter. With sixteen PoE+ copper ports and two SFP uplinks, it supports cameras, access points, and other powered devices in medium-scale environments. Field-friendly DIP controls make on-site adjustments simple, while a generous power budget and smart cooling give steady performance without configuration overhead.

Key Features 16 PoE+ Gigabit ports with 2 SFP uplinks
240W total PoE budget
DIP switch for on-site feature control
Extend mode for long cable runs
Smart fan thermal management
Rack-mountable metal chassis
Advanced DIP Switch Convenience The DGS-1018P allows the toggling of advanced features at the flick of a DIP switch to adapt to network changes and application requirements. Make immediate onsite adjustments to flow control, port isolation and storm control, PD-alive, and extend mode settings without having to access complicated web UI settings, eliminating the need for costly technicians and messy configurations.

Faster Setups and Lower Costs The plug-and-play DGS-1018P with Gigabit PoE+ (IEEE 802.3at) ports delivers up to 30 W per port with a 240 W total power budget, connecting PoE-enabled devices without additional power supplies. Ideal for access points, cameras, displays, and much more. The DGS-1018P simplifies installation, reduces cabling costs, and features a 5-speed smart fan to enhance energy efficiency.

Extend Uplink Beyond 100 m via SFP Ports? The DGS-1018P features 2 SFP uplink ports capable of extending Gigabit transmission beyond the 100-meter copper Ethernet limitation to aggregation/core layers, offering both network flexibility and scalability to meet various needs of network application requirements.

Prioritize Traffic for Optimized Performance With the DGS-1018P, you can effortlessly manage your network traffic with the 802.1p Quality of Service (QoS) feature. The switch automatically organizes and prioritizes time-sensitive and critical data for efficient delivery, enabling buffer-free video streaming as well as jitter-free video and voice calls.

Priority to Critical Network Traffic for Smooth Performance With the DGS-1018P, managing network traffic is simple thanks to the 802.1p Quality of Service (QoS) feature. The switch automatically prioritizes time-sensitive and critical data, ensuring smooth video streaming and uninterrupted voice and video calls.

Get Love2Shop Vouchers with this Product Fill in this form to get your Love2Shop voucher when you purchase this product

D-Link’s DGS-1210-10MP Gigabit PoE Smart+ Switch with 2 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility. 

The DGS-1210-10MP uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance and features a fanless design that allows for quieter operation and helps to extend the device’s lifetime.

The DGS-1210-10MP is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-10MP is a Smart PoE+ switch with a power budget of 130W that provides 8 PoE-enabled ports power of up to 30 W each. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-10MP: 8 x 1000Base-T 802.3at PoE+ 2 x 1GbE SFP
Fanless 130W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX

DGS-1210-08P DGS-1210-10 DGS-1210-10MP DGS-1210-10P Form Factor Desktop/ Rackmount Desktop/ Rackmount Desktop/ Rackmount Desktop/ Rackmount Switching Capacity 20 Gbps 20 Gbps 20 Gbps 20 Gbps 100M/1G Copper  (RJ-45) Ports 8 8 8 8 1G SFP Fibre Ports  2 2 2 2 PoE/PoE+ Ports 8 N/A 8 8 PoE Standard 802.3af N/A 802.3af/ 802.3at  802.3af/ 802.3at  PoE Budget 45 W N/A 130 W 65 W PoE Capable Ports Ports 1 to 8: Up to 15.4 W N/A Port 1 to 8 (30 W max. per PoE port) Port 1 to 8 (30 W max. per PoE port) Dimensions 280 x 180 x 44 mm 280 x 126 x 44 mm 330 x 180 x 44 mm 280 x 126 x 44 mm

Gigabit Smart Managed Switches - DGS-1100-24PV2

The DGS-1100 (V2) Series is a range of highly affordable smart-managed switches designed to meet the requirements of small, medium, and enterprise businesses. Advanced management features, bandwidth management, PoE option, diagnostic and troubleshooting tools, and energy-efficient technologies provide a flexible solution to meet your networking requirements

The DGS-1100 (V2) Series is equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping to help businesses protect their network. The switches are also ideal for IP surveillance deployment with the Surveillance VLAN support that gives high priority surveillance traffic to mitigate disruption and guarantee the quality of video recording







Product Highlights: Simple Layer 2 Management
Web-based User Interface
PoE options up to 370W power budget
Limited-Lifetime Warranty after registration







 



Simple. Easy. Smart. DGS-1100 Smart Switch Series provides an affordable solution for environments that require simple network management.






Smart Web UI The DGS-1100's web user interface is an easy way to manage Layer 2 features, such as VLANs, Spanning Tree Protocol (STP), link aggregation (static). With powerful security features like IGMP snooping, Static MAC, and Storm Control, the DGS-1100 Smart family is a versatile solution for environments that require easy to deploy and easy to configure solutions without added complexities.




Easy to Deploy and Manage D-Link’s free Network Assistant (DNA) displays all connected devices and speeds up the first time configuration. The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools. Optional upgrade licenses allow you to broaden your network and analysis.





PoE and Poe+, with budgets up to 370W The DGS-1100 Smart Series includes a range of high power budget PoE-enabled switches for businesses looking to power larger deployments of VoIP phones, wireless access points or network cameras.




Easy Troubleshooting The DGS-1100 Series features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostics feature is designed for network administrators to quickly examine the quality of the copper cables, recognise the cable type, and detect cable errors.

















PhysicalAvailable in multiple configurations, with or without PoE and fibre support
Fanless design for silent operation 





Green Technology Link status detection
IEEE 802.3az Energy-Efficient Ethernet compliant
Time-based PoE (PoE models excluding DGS1100-08PV2) 





Advanced Features IGMP Snooping
Bandwidth Control
IEEE 802.1Q VLAN traffic segregation
Port-based VLAN
IEEE 802.1p Quality of Service
Surveillance VLAN
Voice VLAN 





Management Features Client-based utility or web-based GUI
Built-in SNMP MIB 








 



Physical Power Input • 100 to 240 V AC / 50 to 60 Hz Internal Power Supply MTBF 406,887 hours Operating Temperature -10 to 50 °C / 14 to 122 °F Temperature (Storage) -40 to 70 °C / -40 to 158 °F Humidity (Operating) 0% to 95% non-condensing Humidity (Storage) 0% to 95% non-condensing Dimensions 280 x 180 x 44 mm Weight 1.5 kg An installation guide be found in the 

Get Love2Shop Vouchers with this Product Fill in this form to get your Love2Shop voucher when you purchase this product

D-Link’s DGS-1210-28P Gigabit PoE Smart+ Switch with 4 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility,

The DGS-1210-28P uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-28P features a smart fan design that powers on after the switch reaches a certain temperature, saving energy and cutting costs without sacrificing performance.

The DGS-1210-28P is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-28P is a Smart PoE+ switch with power budgets of 193W that provides 24 PoE-enabled ports with 4 ports that support up to 30W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-28P: 20 x 1000Base-T 802.3af PoE 4 x 1000Base-T 802.3at PoE 4 x 1GbE SFP 193W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX
Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.


Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorised IP assignment.


DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 12 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 85 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 12: Up to 30 W N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

Get Love2Shop Vouchers with this Product Fill in this form to get your Love2Shop voucher when you purchase this product



D-Link’s DGS-1210-28MP Gigabit PoE Smart+ Switch with 4 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility,

The DGS-1210-28MP uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-28MP features a smart fan design that powers on after the switch reaches a certain temperature, saving energy and cutting costs without sacrificing performance.

The DGS-1210-28MP is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-28MP is a Smart PoE+ switch with power budgets of 370W that provides 24 PoE-enabled ports that support up to 30W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-28MP: 24 x 1000Base-T 802.3at PoE 4 x 1GbE SFP 370W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX
Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.


Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorised IP assignment.


DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 12 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 85 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 12: Up to 30 W N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

The D-Link DGS-1026MP 26-Port Gigabit Max PoE Switch enables users to easily connect and power PoE-capable devices such as wireless access points (APs), IP cameras, and IP phones. Each of the 24 PoE ports can supply up to 30 W, with a total PoE budget of 370 W.

Features

24 x Gigabit Ethernet ports (4x PoE+ ports)
2 Gigabit Combo Uplink Ports
370W power budget
52 Gbps switching fabric capacity
Plug & play simplicity for easy installation
Hassle-Free Setup

The DGS-1026MP is a plug-and-play device that requires no configuration, so setup is simple and hassle-free. Simply connect the switch to the network and then connect multiple computers, share files and make VoIP calls across the network.



Energy Efficient

To help small businesses save on operating costs, the DGS-1026MP supports IEEE 802.3az Energy Efficient Ethernet (EEE). This feature actively monitors network traffic and automatically puts ports that are not being used into hibernation, powering them on only when they are required.



Power Over Ethernet+

The DGS-1026MP features 24 10/100/1000BASE-T ports that support the IEEE 802.3at PoE+ standard. Each of the 24 PoE ports can supply up to 30 W, with a total PoE budget of 370 W. The PoE usage LEDs further provide real-time feedback on the current PoE power usage on the network and helps plan out the PoE network budget, preventing PoE overloading problems..





Expand Your Network

With 2 x Gigabit combo uplink ports, businesses have additional flexibility their network deployment, offering a choice for upstream or downstream server connections via a fibre or copper interface.

D-Link DGS-1210-24P Gigabit Smart Switch with Fibre Uplinks is the latest generation of D-Link Smart Switches featuring D-Link Green 3.0 technology. offering a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensure your network remains protected after the upgrade from IPv4 to IPv61. By offering multiple management options, the Smart Switches allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210-24P Smart Switch provides functionality, security and manageability for a fraction of the standard cost of ownership.

The DGS-1210-24P is an affordable PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1210-24P is a 24-port Smart PoE Switch that provides 24 PoE-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

Features:

Easily manage your entire network with the Web GUI or D-Link Network Assistant using features like automatic switch discovery, batch operations, and more
Innovative Safeguard Engine, ACL, and ARP Spoofing Prevention protect your network from malicious attacks and illegal access
Range of D-Link Green Technology features help save energy usage automatically and reduce costs, without sacrificing performance


DGS-1210-24P:

24 x 1000Base-T / 802.3af PoE

4 x 1GbE SFP


193W PoE budget


Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.



Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.






DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 24 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 193 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 24: Up to 30 W
(Max 193 W) N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

Get Love2Shop Vouchers with this Product Fill in this form to get your Love2Shop voucher when you purchase this product

The D-Link DGS-1250-28XMP 24-Port Gigabit Smart Managed PoE+ Switch with 4 x 10G Uplinks is the latest generation of switches to provide increased Power over Ethernet (PoE) output, high port density, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1250-28XMP provides a cost-efficient and flexible solution for expanding any business network. 10G High-Bandwidth Connectivity

All models in the DGS-1250 Series feature four 10G SFP+ ports, allowing you to choose the most suitable media type for your requirement, to mitigate network bottlenecks. 24 1000BASE-T ports
4 10G SFP+ uplink ports
Up to 370W PoE power budget
Layer 2 and Layer 3 Lite features
Industry standard full CLI1, web GUI, console port
Dual software images & Dual configuration files
D-Link Limited Lifetime Warranty
Layer 2 Features

Such as port mirroring, Spanning Tree Procol (STP), RSTP, MSTP, Link Aggregation. QoS & Surveillance Mode

Capabilities like 802.11p Quality of Service, Bandwidth Control, Auto-Voice VLAN, and Surveillance Mode. Layer 3 Lite Features

Including IP interfaces, IPv6 Neighbor Discovery (ND), and IPv4/IPv6 Static Routing. Security controls

Including ARP Spoofing Prevention, port security - up to 64 MAC addresses per port, IMP-Binding, and D-Link Safeguard Engine. Management interfaces

Dedicated RJ-45 console port. Full CLI1, multilingual web GUI, SNMP MIB for remote NMS (D-View 7). Dual configuration files and dual software images Limited Lifetime Warranty & Next Day Service

Register to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included. 10-Gigabit Ethernet port

Four 10G SFP+ uplink ports. Backwards compatibility with RJ-45 ports. High PoE budget

Up to 370W Power over Ethernet (PoE) power budget to power more devices. Leading the way with affordable 10 Gigabit connectivity. Deploy the most cost-effective 10G solution as core switches for SMBs and as access switches for Enterprises. Designed with a high port density, high-bandwidth ports to remove bottlenecks, a high PoE power budget for larger deployments, redundancy capabilities to maintain uptime, easy-to-use multilingual web UI management, dedicated console port and full CLI control.

DGS-1250-28XMP
24 x 10/100/1000BASE-T PoE
4 x 10G SFP+ ports
128 GBps switching capacity

 

Easier maintenance, less downtime. Support for STP, RSTP, and MSTP provides redundant links, prevents network loops, increases network reliability and minimises downtime for essential applications. These switches can even withstand temperatures between -5 to 50°C. Dual software images and configuration files allow the switch to quickly change between firmware versions and configurations to minimise downtime 10G connections Each switch in the series has four 10G SFP+ ports, which allows the most suitable media type to be chosen and mitigates network bottlenecks. The flexible uplink connections in both 1G/10G speeds deliver on data-intensive tasks.  

Optimised for Video Surveillance D-Link’s exclusive Surveillance Mode provides a Web UI designed for video surveillance: it gives you an instant snapshot of your topology, makes features easy to access, and simplifies management of your surveillance network. Layer 3 Lite Including IP interfaces, IPv6 Neighbor Discovery (ND), ARP-Snooping Prevention, IGMP and MLD Snooping, LLDP and LLDP-MED. The DGS-1250 series also includes IPv4/IPv6 static routing capabilities for a scalable and more efficient network. QoS The series supports 802.11p Quality of Service to deliver data to devices based on the priority and type of traffic, and bandwidth Control to reduce unwanted network broadcast traffic. And the Auto-Voice and Auto-Surveillance VLAN features allow voice and video traffic to be automatically identified and prioritised.  

Security down to the port level. The D-Link Safeguard Engine helps protect against malicious traffic flooding the network in the event of a malicious attack. The series supports IMP-Binding which is an easy method to control nodes during IP conflicts and auditing issues, and it prevents ‘ARP spoofing’ and 'man-in-the-middle' malicious attacks.

Network security is further reinforced with ARP Inspection, DHCP Snooping, and a host of security and authentication features such as 802.1X port-based authentication, port security for 64 MAC addresses per port. The series also includes network protection functionalities like Access Control List, and DHCP Server Screening that only allows legitimate DHCP Server IP addresses on specific ports.

 

Fewer wires, more PoE power. All DGS-1250 series PoE switches support IEEE 802.3af/at with a high PoE power budget of 370W. This means more power to remote devices through single Ethernet cables without needing nearby power outlets, and results in faster and easier PoE deployments of VoiP phones, wireless APs or network cameras..  

Network management options to suit your business. The DGS-1250 series comes with the intuitive D-Link Network Assistant (DNA) utility for which simplifies the discovery of all devices using the D-Link Discovery Protocol within the same L2 network segment and displays them on screen for instant access. Simultaneous configurations and basic setups of all discovered devices, including password changes and firmware upgrades, can then be done easily.

The series can also be managed through the web-GUI that has 11 selectable languages, or the free, SNMP-supported D-View 7. Each switch includes a dedicated console port, and the full CLI1 provides more control, precision and repeatability.



1 Full CLI support available at end 2019 via firmware update.

Get Love2Shop Vouchers with this Product Fill in this form to get your Love2Shop voucher when you purchase this product

D-Link’s DGS-1210-52MP Gigabit PoE Smart+ Switch with 4 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility. 

The DGS-1210-52MP uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-52MP features a smart fan design that powers on after the switch reaches a certain temperature, saving energy and cutting costs without sacrificing performance.

The DGS-1210-52MP is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-52MP is a Smart PoE+ switch with power budgets of 193W that provides 48 PoE-enabled ports with 8 ports that support up to 30W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-52MP: 40 x 1000Base-T 802.3af PoE 8 x 1000Base-T 802.3at PoE 4 x 1GbE SFP 370W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX

Unleash your Wi-Fi 6 capabilities with PoE & Multi-Gigabit ports and effortlessly aggregate your Gigabit network with 10 GB uplink or stacking.

The DGS-1520 Series, a new generation of Lite Layer 3 Stackable Smart Managed Switches, includes four 10 GB ports for uplink or stacking up to a total of eight switches with a total of 80 Gigabit stacking bandwidth. Designed for effortless multi-site network deployments with Zero Touch Provisioning, the DGS-1520 Series is also powerful enough for server and storage applications.

For unrestricted Wi-Fi 6 edge device capabilities, PoE models offer four 2.5 GB Base-T ports for Multi-Gigabit connectivity. For SMBs with expanding networks and significant bandwidth growth, the DGS-1520 effortlessly adds highly cost-effective 10 GB connectivity to ensure seamless aggregation between access and core layers.

The DGS-1520-52MP interface includes 44x 10/100/1000 Base-T PoE ports, 4x 2.5G Base-T PoE Ports, 2x 10G BaseT ports, 2x 10G SFP+ ports. It has a 188 Gbps switching capacity and PoE power budget of 370W/740W with RPS.




Key Features

Effortless deployment with Zero Touch Provisioning


Multi-site management via Web GUI


Perfect for SMB access & aggregation layers


Quickly add 10 GB Ethernet upgrade to infrastructure


Power over Ethernet and fiber options with various port combinations

Highlights




Stackable Smart Gigabit

Stack up to eight switches for high-density Gigabit aggregation

Zero Touch Provisioning

Effortless multi-site deployment  



Multi-Gigabit Ports

Four 2.5 GB Base-T ports for Wi-Fi 6 APs (PoE models)

Flexible Stacking or Uplink

10 GB Base-T and/or SFP+ (fiber) ports for stacking or uplink  



High Capacity

188 Gbps switching capacity

PoE Capable

Up to 370 W PoE output per switch  



Power Redundancy

Connect with DPS-520 for power redundancy (non-PoE models)

Advanced Manageability

Supports dynamic routing and selective Q-in-Q tagging  

High Availability

The DGS-1520 Series brings reliable, yet affordable, Gigabit connectivity with four 10-Gigabit ports (two 10G Base-T and two 10G SFP+) for high-speed uplink or stacking. Boost your network performance, simplify your network infrastructure, improve bandwidth and reduce cabling complexity.  

Multi-Gigabit Support

Multi-Gigabit ports on the DGS-1520 Series switch (PoE models only) support 100 MB / 1 GB / 2.5 GB speeds to maximize various device capabilities, such as Wi-Fi 6 (802.11ax) access points, which can often exceed single Gigabit speeds.

* For DGS-1520-28MP & DGS-1520-52MP only  

Minimize Outages with Power Redundancy
* non-PoE models only

For a more resilient network infrastructure, connect up to four DGS-1520 switches (non-PoE models only) with the DPS-520 PoE redundant power supply system through the management port and actively back-up four devices to significantly reduce power redundancy costs.

Auto Discovery: Automatically detect power requirements of connected PD devices. RPS Port

Status Reporting: Administrators can connect via web browser to remotely monitor DPS-520 status.

Priority: Enables administrators to define RPS failover policy.


  Low Network Latency, High PoE Budget

High Gigabit-port density with up to 188 GB total switching capacity, and up to 30 W per port with 370 W total PoE budget to power your PoE-enabled devices.

*DGS-1520-28MP/52MP

Zero Touch Provisioning

Zero Touch provisioning is perfect for multi-site network expansions. Simply preconfigure your network settings in a centralized location, then install the DGS-1520 switches for effortless deployments.

Powerful Stacking Capability

Stack up to eight DGS-1520 switches with a total of 80 GB stacking bandwidth using hybrid mode (copper and/or fiber), increasing flexibility, scalability, and cost effectiveness for SMBs.  

D-Link DGS-1100-05PDV2. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 5. Full duplex. MAC address table: 2000 entries, Switching capacity: 10 Gbit/s. Power over Ethernet (PoE)

DGS-1100 V2 Series

The DGS-1100 Series is built for the needs of a diverse range of businesses. Support for PoE, advanced management & troubleshooting tools, and energy efficient technology offer a highly flexible solution.

DGS-1100-05PDV2 Key Features

2x Gigabit Ethernet PoE Ports
3x Gigabit Ethernet Ports
10 Gbps Switching Capacity
Dimensions (WxDxH): 150x97x28mm
Weight: 0.34kg
Ventilation: Fanless Design
Features

A variety of port options means there’s a suitable switch, whatever the circumstances
Fanless design for a longer product life and silent operation
Bandwidth Control ensures latency-sensitive traffic always gets the bandwidth it needs
Quality of Service further prioritizes latency-sensitive traffic, ensuring timely delivery
Segregate different types of traffic, such as surveillance or voice, with VLANs to heighten security
PD Alive feature automatically reboots malfunctioning connected PoE devices to mitigate downtime
IGMP Snooping sends multicast traffic only where it needs to go, significantly cutting down network traffic
Innovative energy saving features are good for your budget, as well as the environment
Get up and going quickly with streamlined first-time setup and ongoing management




Smart Switching for your Business

The DGS-1100 Series is a range of smart managed switches that offer a lot of bang for your buck. They are great for busy SMBs who expect a lot of their network, including support for surveillance and VoIP. They are packed with traffic management & optimization features that keep your network congestion free. Meanwhile, management tools are flexible and intuitive, making your life easier.



Expedited Deployment and Effortless Ongoing Management

The D-Link Network Assistant (DNA) can quickly discover and execute initial setup for D-Link Networking devices such as the DGS-1100 Series, which greatly improves efficiency for solution deployment.

VLANs: Stronger Security & Better Traffic Management

Built to help keep operating costs down, the N1500 Series can operate at temperatures up to 113°F (45°C) to help reduce cooling costs. Improve your overall efficiency with these great features:

For Voice - If VoIP calls make up a large slice of your network usage, separating them onto their own VLAN can ensure they get the bandwidth they need for smooth conversations without lag or jitters.

For Surveillance - If you have surveillance cameras and devices attached to your network, putting them onto their own VLAN keeps surveillance footage running seamlessly. At the same time, it can help prevent a variety of malicious attacks by restricting access to different network areas.

Green Features That Help the Environment and Your Budget

D-Link Green technology enables the DGS-1100 Smart Managed Switches to save power without sacrificing performance. Most of the models in the series utilize a fanless design, ensuring a longer product life, as well offering silent and energy-efficient operation. All are IEEE 802.3az-compliant and feature Link Status detection and Time-Based PoE.

PD Alive Actively Mitigates Downtime

Round-the-clock surveillance footage is vital. If you have cameras attached to your network, you may have thought technical difficulties were a given. However, the PD-Alive feature actively mitigates device downtime. If a device is not working as expected, the switch can automatically reset them and get them back online. No need to turn them on and off again in the middle of the night.

The DIS-100E-05 Industrial 5-Port Fast Ethernet Unmanaged Switch delivers dependable and efficient network connectivity for demanding industrial environments. Featuring five Fast Ethernet ports, it enables consistent data transmission for connected devices such as control systems, kiosks, LED displays, and industrial automation equipment. Its unmanaged, plug-and-play design ensures immediate operation without configuration, making it a practical and efficient solution for rapid deployment across a wide range of applications.

Key Features of DIS-100E-05 Five Fast Ethernet ports for reliable and efficient connectivity
Dual power inputs for uninterrupted operation and redundancy
Wide 12–55V DC voltage range for flexible power compatibility
Operates reliably in extreme temperatures from -40°C to 75°C
6kV surge protection safeguards all Ethernet ports
Industrial-grade IP40-rated housing for environmental protection
Fanless design reduces maintenance and improves reliability
Supports IEEE 802.3az Energy-Efficient Ethernet for reduced power consumption
DIN-rail mounting enables fast and organised installation
Plug-and-play functionality allows immediate deployment
Reliable Plug-and-Play Networking The DIS-100E-05 simplifies network expansion with true plug-and-play functionality. No configuration or setup is required, allowing the switch to begin operating immediately after connection. This ensures quick deployment in time-sensitive industrial environments while reducing setup complexity and eliminating the need for specialised configuration.

Dual Power Inputs for Continuous Operation Designed with dual power input capability, the switch ensures continuous performance even if one power source fails. This redundancy significantly reduces the risk of unexpected downtime and maintains consistent network connectivity. Its wide voltage input range supports diverse industrial power systems, providing stable and reliable operation across different installations.

Industrial-Grade Durability and Protection Built with hardened components and a corrosion-resistant enclosure, the DIS-100E-05 is engineered for long-term reliability in harsh conditions. Its IP40-rated housing protects against dust and solid particles, while 6kV surge protection on every Ethernet port helps prevent damage caused by electrical surges. This robust construction ensures dependable performance in factories, outdoor environments, and industrial control systems.

Stable Performance in Extreme Temperatures With an operating temperature range of -40°C to 75°C, the switch maintains reliable functionality in both freezing and high-heat environments. This makes it ideal for deployment in outdoor installations, industrial floors, and locations without climate control, ensuring uninterrupted connectivity regardless of environmental conditions.

Fanless Design for Reduced Maintenance The fanless architecture eliminates moving parts, reducing the risk of mechanical failure and improving overall reliability. This design ensures silent operation while minimising maintenance requirements, making the switch well suited for continuous industrial use where stability and longevity are essential.

Energy-Efficient Operation Support for IEEE 802.3az Energy-Efficient Ethernet helps optimise power consumption by reducing energy usage during periods of low network activity. Combined with its fanless design, the switch provides efficient performance while lowering operational energy costs, making it an economical choice for always-on industrial networks.

Flexible and Space-Saving Installation The compact design and DIN-rail mounting capability allow for easy installation within industrial cabinets and control panels. This enables efficient use of space while ensuring secure and organised deployment alongside other industrial equipment, simplifying integration into existing infrastructure.

Dependable Connectivity for Industrial Applications Equipped with five Fast Ethernet ports, the DIS-100E-05 ensures stable and efficient communication between connected devices. It supports real-time data transfer required for automation systems, digital signage, kiosks, and monitoring equipment, providing reliable connectivity essential for industrial operations.

The DIS-100G-06 Industrial 6-Port Gigabit Unmanaged Switch provides high-speed, reliable network connectivity for demanding industrial environments. Equipped with four Gigabit Ethernet ports and two Gigabit SFP fibre ports, it supports fast copper connections alongside long-distance fibre transmission. Its unmanaged, plug-and-play design enables immediate deployment without configuration, making it an efficient and practical solution for industrial automation systems, remote installations, and network expansion across large facilities.

Key Features of DIS-100G-06 Four Gigabit Ethernet ports for high-speed copper connectivity
Two Gigabit SFP ports for long-distance fibre network expansion
Dual power inputs provide redundancy and continuous operation
Wide 12–55V DC voltage range supports diverse industrial power systems
Operates reliably in extreme temperatures from -40°C to 75°C
6kV surge protection safeguards Ethernet ports from electrical damage
Industrial-grade IP40-rated housing for environmental protection
Fanless design reduces maintenance and improves reliability
Supports IEEE 802.3az Energy-Efficient Ethernet for optimised power usage
DIN-rail mounting enables fast, secure, and organised installation
Plug-and-play functionality allows immediate deployment without configuration
Reliable Plug-and-Play Gigabit Networking The DIS-100G-06 simplifies industrial network deployment with true plug-and-play functionality. No configuration is required, allowing the switch to begin operating immediately once connected. With high-speed Gigabit connectivity, it supports rapid data transmission between industrial devices while reducing setup time and complexity in time-critical environments.

Dual Power Inputs for Continuous Operation Featuring dual power input capability, the switch ensures uninterrupted network performance even if one power source fails. This redundancy minimises downtime and supports consistent connectivity in environments with unstable or varied power conditions. Its wide voltage input range allows compatibility with multiple industrial power systems, ensuring dependable and stable operation.

Industrial-Grade Durability and Protection Built with hardened components and a corrosion-resistant enclosure, the DIS-100G-06 is designed to perform reliably in harsh industrial environments. Its IP40-rated housing protects against dust and solid particles, while integrated 6kV surge protection on Ethernet ports helps prevent electrical damage. This durable construction ensures long-term reliability across factory floors, outdoor installations, and industrial control systems.

Flexible Fibre Connectivity for Long-Distance Networking Two integrated Gigabit SFP ports allow fibre optic connections for extended network reach beyond traditional Ethernet limitations. Fibre connectivity enables high-bandwidth, low-latency communication across long distances while maintaining resistance to electromagnetic interference. This makes the switch ideal for linking remote equipment, separate buildings, and industrial infrastructure.

Stable Performance in Extreme Temperatures With an operating temperature range of -40°C to 75°C, the switch maintains reliable performance in both freezing and high-temperature environments. This ensures consistent connectivity in outdoor installations, factory environments, and industrial locations without climate control, supporting continuous operation in challenging conditions.

Fanless Design for Reduced Maintenance The fanless architecture eliminates moving parts, reducing the risk of mechanical failure and improving overall reliability. This enables silent operation and minimises maintenance requirements, making the switch ideal for continuous industrial use where stability and long-term performance are critical.

Energy-Efficient Operation Support for IEEE 802.3az Energy-Efficient Ethernet helps optimise power consumption by reducing energy usage during periods of low network activity. Combined with its efficient hardware design, the switch delivers reliable performance while lowering operational energy costs in always-on industrial networks.

Flexible and Space-Saving Installation The compact form factor and DIN-rail mounting support allow easy installation within industrial cabinets and control panels. This ensures secure and organised deployment while optimising available space, simplifying integration with existing industrial systems and infrastructure.

High-Speed Connectivity for Industrial Applications With four Gigabit Ethernet ports and two Gigabit SFP fibre ports, the DIS-100G-06 delivers fast and stable communication across both copper and fibre networks. It supports real-time data transfer required for automation systems, digital signage, surveillance, and industrial monitoring equipment, ensuring dependable connectivity for critical operations.

The DIS-100G-06P Industrial 6-Port Gigabit Unmanaged PoE Switch delivers high-speed network connectivity alongside integrated Power over Ethernet capability for industrial deployments. Featuring four Gigabit PoE+ ports and two Gigabit SFP fibre ports, it enables both data transmission and power delivery through a single cable while supporting long-distance fibre connections. Its unmanaged, plug-and-play design allows immediate deployment without configuration, making it ideal for powering and connecting IP cameras, wireless access points, sensors, and industrial network devices across large facilities and remote environments.

Key Features of DIS-100G-06P Four Gigabit PoE+ Ethernet ports provide data and power delivery over a single cable
Supports IEEE 802.3af/at standards with a total PoE power budget of up to 120W
Two Gigabit SFP ports enable long-distance fibre network expansion
Dual power inputs provide redundancy and continuous operation
Wide 48–55V DC voltage range supports diverse industrial power systems
Operates reliably in extreme temperatures from -40°C to 75°C
6kV surge protection safeguards Ethernet ports from electrical damage
Industrial-grade IP40-rated housing for environmental protection
Fanless design reduces maintenance and improves reliability
Supports IEEE 802.3az Energy-Efficient Ethernet for optimised power usage
DIN-rail mounting enables fast, secure, and organised installation
Plug-and-play functionality allows immediate deployment without configuration
Integrated PoE+ Power and Gigabit Connectivity The DIS-100G-06P combines high-speed Gigabit switching with built-in PoE+ capability, allowing both power and data to be delivered through a single Ethernet cable. With a total PoE budget of up to 120W and support for up to 30W per port, it powers devices such as IP cameras, wireless access points, VoIP phones, and IoT equipment without requiring separate power supplies. This simplifies installation, reduces cabling requirements, and enables flexible device placement.

Reliable Plug-and-Play Deployment The unmanaged design enables immediate operation without configuration. Simply connect network devices and the switch automatically begins forwarding data and supplying power where required. This reduces setup complexity and allows fast deployment in industrial automation systems, surveillance networks, and remote infrastructure.

Dual Power Inputs for Continuous Operation Dual power input capability ensures uninterrupted network operation by allowing the switch to continue functioning if one power source fails. This redundancy supports reliable performance in environments with unstable or variable power availability, while the wide voltage input range ensures compatibility with industrial power systems.

Industrial-Grade Durability and Protection Constructed with hardened components and a corrosion-resistant enclosure, the DIS-100G-06P is designed for reliable operation in demanding industrial environments. Its IP40-rated housing protects against dust and solid particles, while integrated 6kV surge protection helps safeguard connected equipment from electrical damage, ensuring long-term operational stability.

Flexible Fibre Connectivity for Extended Network Reach Two integrated Gigabit SFP ports support fibre optic connections for long-distance communication beyond traditional Ethernet limitations. Fibre connectivity enables high-bandwidth, low-latency transmission while providing resistance to electromagnetic interference, making it suitable for connecting separate buildings, industrial systems, and remote installations.

Stable Operation in Extreme Temperatures With an operating temperature range of -40°C to 75°C, the switch maintains dependable performance in both freezing and high-temperature environments. This ensures reliable connectivity in outdoor deployments, factory floors, and industrial locations without climate control.

Fanless Design for Reduced Maintenance The fanless architecture eliminates moving components, reducing mechanical failure risk and enabling silent operation. This improves reliability and minimises maintenance requirements, making the switch suitable for continuous industrial operation.

Energy-Efficient Operation Support for IEEE 802.3az Energy-Efficient Ethernet helps optimise power consumption by reducing energy usage during periods of low network activity. Combined with efficient PoE power delivery, this ensures dependable performance while maintaining efficient energy use in always-on environments.

Flexible and Space-Saving Installation The compact form factor and DIN-rail mounting capability enable quick installation within industrial cabinets and control panels. This allows secure, organised deployment while optimising available space and simplifying integration into existing infrastructure.

High-Speed PoE Connectivity for Industrial Applications With four Gigabit PoE+ Ethernet ports and two Gigabit SFP fibre ports, the DIS-100G-06P delivers reliable high-speed connectivity while powering connected devices. It supports applications such as industrial automation, surveillance systems, wireless networking, and monitoring equipment, ensuring stable communication and efficient device operation.

The DIS-100G-10 Industrial 10-Port Gigabit Unmanaged Switch delivers high-speed, reliable network connectivity for industrial environments and infrastructure deployments. Featuring eight Gigabit Ethernet ports and two Gigabit SFP fibre ports, it supports efficient data transmission alongside flexible long-distance fibre connections. Its unmanaged, plug-and-play design enables immediate deployment without configuration, making it ideal for connecting industrial controllers, IP cameras, wireless access points, monitoring systems, and network devices across factories, remote installations, and demanding environments.

Key Features of DIS-100G-10 Eight Gigabit Ethernet ports provide fast and reliable wired network connectivity
Two Gigabit SFP ports enable long-distance fibre network expansion
Switching capacity of up to 20Gbps supports high-bandwidth data transmission
Dual power inputs provide redundancy and continuous operation
Wide 12–55V DC voltage range supports diverse industrial power systems
Operates reliably in extreme temperatures from -40°C to 75°C
6kV surge protection safeguards Ethernet ports from electrical damage
Industrial-grade IP40-rated housing for environmental protection
Fanless design reduces maintenance and improves reliability
Supports IEEE 802.3az Energy-Efficient Ethernet for optimised power usage
DIN-rail mounting enables fast, secure, and organised installation
Plug-and-play functionality allows immediate deployment without configuration
High-Speed Gigabit Connectivity for Industrial Networks The DIS-100G-10 provides eight Gigabit Ethernet ports that deliver fast and dependable network performance for industrial devices and infrastructure. With a switching capacity of up to 20Gbps, it ensures smooth and efficient data transfer between connected systems, supporting applications such as automation systems, surveillance networks, digital signage, and industrial monitoring.

Reliable Plug-and-Play Deployment The unmanaged design allows immediate operation without configuration. Simply connect network devices and the switch automatically begins forwarding data. This simplifies installation, reduces setup complexity, and enables rapid deployment across industrial facilities, remote infrastructure, and automation systems.

Dual Power Inputs for Continuous Operation Dual power input capability ensures uninterrupted network performance by allowing the switch to continue operating if one power source fails. This redundancy supports reliable operation in environments with unstable power conditions, while the wide voltage input range ensures compatibility with industrial power systems.

Industrial-Grade Durability and Protection Designed for demanding industrial environments, the DIS-100G-10 features a rugged enclosure with IP40-rated protection against dust and solid particles. Integrated 6kV surge protection helps safeguard connected equipment from electrical damage, ensuring dependable long-term operation in challenging conditions.

Flexible Fibre Connectivity for Extended Network Reach Two integrated Gigabit SFP ports enable fibre optic connections for long-distance communication beyond the limitations of standard Ethernet cabling. Fibre connectivity provides high-bandwidth transmission, low latency, and resistance to electromagnetic interference, making it suitable for connecting separate buildings, industrial systems, and remote installations.

Stable Operation in Extreme Temperatures With an operating temperature range of -40°C to 75°C, the switch delivers consistent and dependable performance in both cold and high-temperature environments. This ensures reliable network connectivity in outdoor deployments, factory floors, and industrial locations without climate control.

Fanless Design for Reduced Maintenance The fanless architecture eliminates moving components, reducing mechanical failure risk and enabling silent operation. This improves long-term reliability while minimising maintenance requirements, making it ideal for continuous industrial operation.

Energy-Efficient Operation Support for IEEE 802.3az Energy-Efficient Ethernet helps reduce power consumption during periods of low network activity. This improves operational efficiency while maintaining dependable network performance in always-on industrial environments.

Flexible and Space-Saving Installation The compact form factor and DIN-rail mounting capability allow fast and secure installation within industrial cabinets and control panels. This enables organised deployment while optimising available space and simplifying integration into existing infrastructure.

Reliable High-Speed Connectivity for Industrial Applications With eight Gigabit Ethernet ports and two Gigabit SFP fibre ports, the DIS-100G-10 provides stable, high-speed connectivity across industrial networks. It supports applications such as automation systems, monitoring equipment, wireless infrastructure, and remote network expansion, ensuring dependable communication and efficient operation.

The D-Link DIS-210G-06 is an industrial smart managed Gigabit switch designed to deliver stable and reliable network connectivity in demanding environments. It features four Gigabit Ethernet ports and two SFP ports, enabling flexible copper and fibre connectivity within a compact, fanless enclosure. Built for continuous operation in harsh industrial conditions, it offers dependable performance, resilient network protection, and straightforward management for critical infrastructure deployments.

Key Features of D-Link DIS-210G-06 2 x 1G SFP ports for fibre uplinks and extended connectivity
4 x Gigabit Ethernet ports for high-speed wired connections
Dual power inputs provide power redundancy
Wide voltage input range supports flexible power deployment
-40°C to 75°C operating temperature for harsh environments
6kV surge protection on Ethernet ports for enhanced durability
Fanless design with IP40-rated metal housing
Supports Ethernet Ring Protection Switching (ERPS)
L2 management features and static routing support
Advanced OAM monitoring via Y.1731, 802.1ag, and 802.3ah
Reliable Power Redundancy The DIS-210G-06 supports dual power inputs, allowing the switch to receive power from two independent sources. This redundancy ensures uninterrupted operation in the event of a power failure, helping maintain network uptime in mission-critical environments.

Fast Failover and Network Monitoring The switch supports ERPSv1/v2 to provide rapid failover in ring network topologies, helping restore connections quickly in the event of a disruption. Integrated Operations, Administration, and Maintenance (OAM) tools including Y.1731, 802.1ag, and 802.3ah enable continuous monitoring of network performance, allowing administrators to identify and resolve issues efficiently while maintaining stable network operation.

Built for Industrial Environments The DIS-210G-06 is designed with industrial-grade durability to operate reliably in demanding conditions such as factory floors, outdoor enclosures, and remote installations. Its IP40-rated housing protects against dust and physical hazards, while the fanless construction reduces mechanical wear. With support for a wide operating temperature range and built-in surge protection, the switch ensures long-term reliability in harsh environments.

High Network Reliability Support for ERPS enables rapid recovery from network faults, helping maintain continuous data flow in industrial ring topologies. Combined with redundant power input support, the switch is designed to minimize downtime and maintain consistent network availability.

Easy Troubleshooting and Management The DIS-210G-06 includes loopback detection and a web-based management interface, allowing administrators to monitor and manage network performance efficiently. Loop detection helps prevent network disruption by identifying and isolating faults, while the web interface provides straightforward configuration and monitoring.

Industrial-Grade Fanless Design The switch features a rugged, fanless construction that reduces maintenance requirements and improves long-term reliability. Its durable metal enclosure and wide temperature tolerance make it suitable for industrial cabinets, automation systems, and outdoor network installations.

Flexible Copper and Fibre Connectivity With four Gigabit Ethernet ports and two SFP slots, the DIS-210G-06 supports both short-range copper connections and long-distance fibre uplinks. This flexibility makes it suitable for connecting distributed network devices across industrial facilities and infrastructure environments.

Advanced Management and Monitoring Support for Layer 2 management features, static routing, ERPS redundancy, and OAM monitoring enables efficient traffic control and network visibility. These capabilities help maintain reliable communication and simplify ongoing network maintenance.

The DIS-100G-10P Industrial 10-Port Gigabit Unmanaged PoE Switch delivers high-speed network connectivity and integrated Power over Ethernet for industrial environments and infrastructure deployments. Featuring eight Gigabit PoE+ Ethernet ports and two Gigabit SFP fibre ports, it provides both reliable data transmission and power delivery to connected devices using a single cable. Its unmanaged, plug-and-play design enables immediate deployment without configuration, making it ideal for powering and connecting IP cameras, wireless access points, VoIP phones, industrial controllers, and monitoring systems across factories, remote installations, and demanding environments.

Key Features of DIS-100G-10P Eight Gigabit PoE+ Ethernet ports provide both power and high-speed network connectivity
IEEE 802.3af/at PoE support delivers up to 30W per port with a total 240W power budget
Two Gigabit SFP ports enable long-distance fibre network expansion
Extend Mode supports PoE transmission distances up to 250 metres for remote devices
Dual power inputs provide redundancy and continuous operation
Wide 48–57V DC voltage range supports diverse industrial power systems
Operates reliably in extreme temperatures from -40°C to 75°C
6kV surge protection safeguards Ethernet ports from electrical damage
Industrial-grade housing ensures reliable operation in harsh environments
Fanless design reduces maintenance and improves long-term reliability
Supports IEEE 802.3az Energy-Efficient Ethernet for optimised power usage
DIN-rail mounting enables fast, secure, and organised installation
Plug-and-play functionality allows immediate deployment without configuration
Integrated PoE+ for Power and Connectivity The DIS-100G-10P provides eight Gigabit PoE+ ports that deliver both data and electrical power through a single Ethernet cable. With support for up to 30W per port and a total power budget of 240W, it enables direct connection of powered devices such as IP cameras, wireless access points, and VoIP phones. This simplifies installation, reduces cabling requirements, and eliminates the need for separate power supplies.

Reliable Plug-and-Play Deployment The unmanaged design allows immediate operation without configuration. Simply connect network devices and powered equipment, and the switch automatically delivers both power and data. This simplifies installation, reduces setup complexity, and enables rapid deployment across industrial facilities, remote infrastructure, and automation systems.

Dual Power Inputs for Continuous Operation Dual power input capability ensures uninterrupted network and PoE operation by allowing the switch to continue functioning if one power source fails. This redundancy supports reliable performance in environments with unstable power conditions, while the wide voltage input range ensures compatibility with industrial power systems.

Industrial-Grade Durability and Protection Designed for demanding industrial environments, the DIS-100G-10P features a rugged enclosure and hardened components for dependable long-term operation. Integrated 6kV surge protection helps safeguard connected equipment from electrical damage, ensuring consistent performance in harsh and electrically noisy conditions.

Flexible Fibre Connectivity for Extended Network Reach Two integrated Gigabit SFP ports enable fibre optic connections for long-distance communication beyond the limitations of standard Ethernet cabling. Fibre connectivity provides high-bandwidth transmission, low latency, and resistance to electromagnetic interference, making it suitable for connecting separate buildings, industrial systems, and remote installations.

Extended PoE Range for Remote Devices Extend Mode allows PoE transmission distances of up to 250 metres, making it ideal for powering and connecting devices located far from the switch. This capability is especially useful for surveillance cameras, outdoor equipment, and industrial monitoring systems where devices must be installed at extended distances.

Stable Operation in Extreme Temperatures With an operating temperature range of -40°C to 75°C, the switch delivers consistent and dependable performance in both cold and high-temperature environments. This ensures reliable network connectivity and power delivery in outdoor deployments, factory floors, and industrial locations without climate control.

Fanless Design for Reduced Maintenance The fanless architecture eliminates moving components, reducing mechanical failure risk and enabling silent operation. This improves long-term reliability while minimising maintenance requirements, making it ideal for continuous industrial operation.

Energy-Efficient Operation Support for IEEE 802.3az Energy-Efficient Ethernet helps reduce power consumption during periods of low network activity. This improves operational efficiency while maintaining dependable network and PoE performance in always-on industrial environments.

Flexible and Space-Saving Installation The compact form factor and DIN-rail mounting capability allow fast and secure installation within industrial cabinets and control panels. This enables organised deployment while optimising available space and simplifying integration into existing infrastructure.

Reliable High-Speed Connectivity with Integrated PoE+ With eight Gigabit PoE+ Ethernet ports and two Gigabit SFP fibre ports, the DIS-100G-10P provides stable, high-speed connectivity while powering connected devices directly. It supports applications such as surveillance systems, wireless infrastructure, automation equipment, and remote network expansion, ensuring dependable communication and simplified device deployment.

Features 8x 10/100/1000 BASE-T PoE
2x 100/1000 Mbps SFP
20 Gbps switching capacity
130 W PoE Power Budget
Manage your network from one place from a browser or through the app, anywhere, anytime
Easy to use multilingual user interface for single or multi-site management
1-year Nuclias Cloud Management license included with the product. Renewal options from 1 to 5 years
Large switching capacity of up to 104 Gbps
Plug-and-play installation, Nuclias cloud-based auto-configurations.
Power devices using single Ethernet cables, without relying on nearby power outlets
Easy to add or scale back in line with your requirements as a business
Register to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included
Easier With Nuclias D-Link’s Nuclias Cloud-Managed Switches come pre-configured and are controlled remotely through the Nuclias Cloud web-browser interface or Nuclias app. That means your business can enjoy feature-rich yet easy-to-use cloud management, rapid deployments, and unlimited scalability to match the requirements of your network.

Centralised Management Zero-touch Provisioning

Plug-and-connect deployments without the need for any additional configuration. Switches download their configurations from the cloud for quicker and easier management.

Manage your entire Nuclias network from anywhere using D-Link’s easy-to-use Nuclias Cloud Management1 platform. Segment the network, manage multiple switches simultaneously, enforce security policies, and monitor live network statistics remotely, all from the cloud with a few clicks.

Cloud-management Simplicity

Nuclias cloud is easy to use, and remote management enables you to monitor and configure your networks from anywhere and doesn’t require any on-site administration, enabling rapid deployments at remote locations.

Remote Network Expansion Nuclias Cloud enables businesses to quickly configure, deploy, maintain, and expand the entire network remotely. All without the expenses of on-site staff, maintenance, and additional equipment.

With unlimited scalability, businesses can easily cater to the demands of a growing network by simply adding more Cloud-Managed Switches. Configuration profiles can be created and pushed through the cloud anytime, anywhere.

Advanced Layer 2 Features While easy to deploy and manage, Nuclias Cloud-Managed Switches are equipped with enterprise-grade features including L2 capabilities such as Link Aggregation Control Protocol (LACP), IGMP snooping, Voice VLAN, Spanning Tree Protocols (STP and RSTP), and a security feature set that includes Access Control Lists (ACLs), port security, and DHCP Server Screening for increased protection.

Loopback Detection

Used to detect loops created by a specific port and automatically shuts down the affected port.

The Cable Diagnostics Feature

Rapidly discovers errors and determines the cable quality, allowing hassle-free diagnostics and maintenance.

Monitoring & Alerts Through the Nuclias dashboard, you can easily view your switches1 real-time port traffic and connection status. And for switches that support PoE, you can monitor real-time power consumption statistics. You can also remotely view real-time information about the network and get an instant overview of key network statistics such as performance, connectivity, and network usage.

It’s easy to customise and filter the dashboard to display only the information that suits you. Be ahead of any problems with instant push notifications and alerts to swiftly identify and resolve problems.

Port-level Security To ensure the safety and reliability of all sensitive traffic, all switches come with Port Security, and data to and from the cloud is separated from regular data using an SSL encrypted out-of-band connection.

Nuclias Cloud also provides the ability to control user access. You can configure external RADIUS servers to set up IP and MAC-based access control lists to authenticate and authorise clients, to create a safer and trusted network environment.

The D-Link DIS-210G-12 is an industrial smart managed Gigabit switch designed for stable network operation in demanding environments. It combines eight Gigabit Ethernet ports with four SFP ports to support copper and fibre connectivity within a compact, fanless housing. Built for continuous operation, it is well suited for industrial networks that require dependable performance, flexible deployment, and straightforward management.

Key Features of D-Link DIS-210G-12 4 x 1G SFP ports for aggregated throughput
8 x Gigabit ports for fast data transmission
Dual power inputs provide power redundancy
Wide voltage compatible with various power sources
-40°C to 75°C operation for harsh environments
6kV surge protection on Gigabit Ethernet ports
Fanless and IP40-rated design for improved reliability
Supports Ethernet Ring Protection Switching (ERPS)
Supports L2 management and IP static routing
Proactive OAM via Y.1731, 802.1ag, and 802.3ah
Uninterrupted Power Redundancy The DIS-210G-12 supports dual power supplies, and each is capable of independently powering the device. The redundancy ensures continuous operation when one power source fails, which minimizes shutdown risk and maintains network performance.

Fast Recovery, Continuous Service The DIS-210G-12 combines ERPSv1/v2 and Operations, Administration, and Maintenance (OAM) to deliver a highly resilient and easy-to-manage network. ERPS ensures redundant backup paths, preventing loops and providing rapid failover with fault recovery as fast as 50ms. OAM includes a function set (Y.1731, 802.1ag, 802.3ah) that continuously monitors physical connections and virtual circuits, helping network administrators quickly identify issues. Together, these features enhance network reliability, minimize downtime, and maintain a consistent, high-quality service experience.

Built Tough for Demanding Conditions The DIS-210G-12 is built with a rugged, durable design ideal for harsh environments such as outdoor installations, unconditioned factory floors, and remote sites. With a wide operating temperature range of -40°C to 75°C, it ensures stable and reliable performance even in extreme conditions. Its industrial-grade IP40-rated enclosure protects against dust and solid particles larger than 1mm, while the fanless design and 6kV surge protection on all Ethernet ports help reduce the risk of downtime and enhance long-term reliability.

High Redundancy and Reliability The DIS-210G Series supports ERPS quick failover recovery for ring topologies that ensures minimal downtime and avoids any loss of data in mission-critical deployment settings. Meanwhile, the dual power input allows for a redundant power supply to make sure the device continues to operate in the event of a primary power supply failure.

Power Over Ethernet The DIS-210G-06P, DIS-210G-12UP and DIS-210G-12P are PoE-ready switches with a total PoE budget of 120 W and 240 W, DIS-210G-06P and DIS-210G-12P capable of supplying up to 30 W of power per port to connected PoE-enabled devices. The DIS-210G-12UP provides 6 PoE ports using 802.3af and 802.3at, and 2 ports using 802.3bt 60W PoE standards. This effectively reduces deployment times, reduces cable clutter, and eliminates the need for dedicated power supplies to allow PoE-devices to be installed in remote locations.

Easy Troubleshooting The DIS-210G Series features loopback detection and a web-based management interface to help network administrators find and solve network problems quickly and easily. Loopback detection is used to detect loops created by a specific port and automatically shuts down the affected port. The web-based interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switches to be controlled from any PC that is connected to the network.

Industrial-Grade Design The switch features a fanless construction and an IP40-rated enclosure, helping to ensure consistent operation in environments exposed to dust, vibration, and temperature extremes. Its wide temperature tolerance makes it suitable for use in outdoor cabinets and factory floor installations.

Flexible Connectivity With a combination of Gigabit copper ports and SFP fibre interfaces, the DIS-210G-12 allows seamless integration into mixed network infrastructures. The SFP ports support longer-distance connections, making the switch ideal for linking control rooms, substations, or distributed network nodes.

Network Management and Reliability Support for L2 management, static routing, and ERPS enables efficient traffic handling and fast recovery in ring network topologies. Built-in OAM standards provide visibility into network performance, helping administrators monitor link health and maintain stable operation.

The D-Link DIS-210G-12P is an industrial PoE+ smart managed switch designed for reliable performance in demanding network environments. It features eight Gigabit PoE+ ports and four 1G SFP uplink ports, providing flexible connectivity for both copper and fibre networks. With a 240W PoE power budget, it can directly power devices such as IP cameras, wireless access points, and VoIP phones, simplifying network deployment and reducing the need for separate power sources.

Key Features of D-Link DIS-210G-12P 4 x 1G SFP ports for aggregated throughput
8 x Gigabit ports for fast data transmission
IEEE 802.3af/at with 240W PoE power budget
Dual power inputs provide power redundancy
-40°C to 75°C operation for harsh environments
6kV surge protection on Gigabit Ethernet ports
Fanless and IP40-rated design for reliability
Supports Ethernet Ring Protection Switching (ERPS)
Supports L2 management and IP static routing
Proactive OAM via Y.1731, 802.1ag, and 802.3ah
Uninterrupted Power Redundancy The DIS-210G-12P supports dual power supplies, and each is capable of independently powering the device. The redundancy ensures continuous operation when one power source fails, which minimizes shutdown risk and maintains network performance.

Fast Recovery, Continuous Service The DIS-210G-12P combines ERPSv1/v2 and Operations, Administration, and Maintenance (OAM) to deliver a highly resilient and easy-to-manage network. ERPS ensures redundant backup paths, preventing loops and providing rapid failover with fault recovery as fast as 50ms. OAM includes a function set (Y.1731, 802.1ag, 802.3ah) that continuously monitors physical connections and virtual circuits, helping network administrators quickly identify issues. Together, these features enhance network reliability, minimize downtime, and maintain a consistent, high-quality service experience.

Built Tough for Demanding Conditions The DIS-210G-12P is built with a rugged, durable design ideal for harsh environments such as outdoor installations, unconditioned factory floors, and remote sites. With a wide operating temperature range of -40°C to 75°C, it ensures stable and reliable performance even in extreme conditions. Its industrial-grade IP40-rated enclosure protects against dust and solid particles larger than 1mm, while the fanless design and 6kV surge protection on all Ethernet ports help reduce the risk of downtime and enhance long-term reliability.

High Power with PoE+ The DIS-210G-12P is equipped with eight PoE ports compliant with IEEE 802.3af/at standards, delivering both data and power through a single Ethernet cable. With a total power budget of up to 240W, each PoE port can supply up to 30W, making it a great fit for powering devices such as surveillance cameras, IP phones, wireless access points, and IoT sensors. This simplifies installation, enables flexible device placement, and reduces the need for additional electrical infrastructure.

High Redundancy and Reliability The DIS-210G Series supports ERPS quick failover recovery for ring topologies that ensures minimal downtime and avoids any loss of data in mission-critical deployment settings. Meanwhile, the dual power input allows for a redundant power supply to make sure the device continues to operate in the event of a primary power supply failure.

Easy Troubleshooting The DIS-210G Series features loopback detection and a web-based management interface to help network administrators find and solve network problems quickly and easily. Loopback detection is used to detect loops created by a specific port and automatically shuts down the affected port. The web-based interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switches to be controlled from any PC that is connected to the network.

Power Over Ethernet The DIS-210G-06P, DIS-210G-12UP and DIS-210G-12P are PoE-ready switches with a total PoE budget of 120 W and 240 W, DIS-210G-06P and DIS-210G-12P capable of supplying up to 30 W of power per port to connected PoE-enabled devices. The DIS-210G-12UP provides 6 PoE ports using 802.3af and 802.3at, and 2 ports using 802.3bt 60W PoE standards. This effectively reduces deployment times, reduces cable clutter, and eliminates the need for dedicated power supplies to allow PoE-devices to be installed in remote locations.

Network Management Support for Layer 2 management, static routing, and ERPS enables efficient traffic handling and rapid failover in ring network topologies. Built-in OAM standards provide administrators with tools to monitor link health and maintain stable network performance.

The DBS-2000-28P Nuclias Cloud-Managed PoE Switch is deployed as pre-configured, zero-configuration switch controlled through the Nuclias Cloud1. They are best-in-class switches designed specifically for distributed networks.

D-Link’s Nuclias Cloud is an innovative cloud networking solution that allows you to centrally manage your entire network from anywhere, any time through its intuitive portal interface or mobile app. Featuring a full range of cloud-managed access points and switches supported by zero- touch deployment, Nuclias Cloud enables small businesses and enterprises to quickly deploy and build a powerful and versatile global wired and wireless network.

Features:

D-Link Nuclias Cloud Management

Centralised cloud-based management
Zero-touch deployment
Intuitive web and app-based interface
Real-time at-a-glance network information
Management of multiple sites and devices through a single pane of glass
Over-the-air firmware updates through the cloud
Instant alerts and notifications
Best-in-class Built for Enterprise Switches

24 x 10/100/1000 BASE-T PoE Ports
4 x 1000 Mbps combo Ports
56 Gbps switching capacity
PoE Budget of 193W
Energy-Efficient Ethernet (EEE)
PoE+ support with up to 30 W per port
Supports 802.1D Spanning Tree (STP) and 802.1w Rapid Spanning Tree (RSTP)
802.3ad Link Aggregation
Loopback protection and IGMP snooping
Access Control Lists (ACLs)
Nuclias cloud-based network management

Manage your network from one place from a browser or through the tablet app, anywhere, anytime. License included

1-year Nuclias Cloud Management license included with the product. Renewal options from 1 to 5 years. Zero-Touch Provisioning

Plug and play, cloud-based auto-configuration. Unlimited scalability

Easy to add or scale back in line with demand. Intuitive web and app-based interface

Easy to use, multi-lingual user interface High switching capacity

Large switching capacity of up to 56 Gbps. PoE up to 193W

Power devices using single Ethernet cables, without relying on nearby power outlets. Limited Lifetime Warranty & Next Day Service

Register to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included. Cloud Networking is easier with Nuclias. D-Link’s Nuclias Cloud-Managed Switches come pre-configured and are controlled remotely through the Nuclias Cloud web-browser interface or Nuclias app. That means your business can enjoy feature-rich yet easy-to-use cloud management, rapid deployments, and unlimited scalability to match the requirements of your network.

Centralised management through a single pane of glass. Manage your entire Nuclias network from anywhere using D-Link’s easy-to-use Nuclias Cloud Management1 platform. Segment the network, manage multiple switches simultaneously, enforce security policies, and monitor live network statistics remotely, all from the cloud with a few clicks. Zero-touch Provisioning

Plug-and-connect deployments without the need for any additional configuration. Switches download their configurations from the cloud for quicker and easier management. Cloud-management simplicity

Nuclias cloud is easy to use, and remote management enables you to monitor and configure your networks from anywhere and doesn’t require any on-site administration, enabling rapid deployments at remote locations. Ready before they’re out of the box. Nuclias Cloud enables businesses to quickly configure, deploy, maintain, and expand the entire network remotely. All without the expenses of on-site staff, maintenance, and additional equipment.

With unlimited scalability, businesses can easily cater to the demands of a growing network by simply adding more Cloud-Managed Switches. Configuration profiles can be created and pushed through the cloud anytime, anywhere. Advanced Layer 2 features and security. While easy to deploy and manage, Nuclias Cloud-Managed Switches are equipped with enterprise-grade features including L2 capabilities such as Link Aggregation Control Protocol (LACP), IGMP snooping, Voice VLAN, Spanning Tree Protocols (STP and RSTP), and a security feature set that includes Access Control Lists (ACLs), port security, and DHCP Server Screening for increased protection. Loopback detection

Used to detect loops created by a specific port and automatically shuts down the affected port. The cable diagnostic feature

Rapidly discovers errors and determines the cable quality, allowing hassle-free diagnostics and maintenance. Monitoring and alerts that keep you ahead. Through the Nuclias dashboard, you can easily view your switches1 real-time port traffic and connection status. And for switches that support PoE, you can monitor real-time power consumption statistics. You can also remotely view real-time information about the network and get an instant overview of key network statistics such as performance, connectivity, and network usage.

It’s easy to customise and filter the dashboard to display only the information that suits you. Be ahead of any problems with instant push notifications and alerts to swiftly identify and resolve problems. 1. Active D-Link Nuclias Cloud account and valid device license required.

2.5 Gigabit Ethernet Smart Managed Switches

The DMS-1100-10TP is a great value range of 2.5 Gigabit switches capable of servicing a range of business needs. Featuring eight 2.5 Gigabit PoE access ports and two 10 Gigabit SFP+ uplinks, it's ideal for deploying multiple high-performance access points or surveillance equipment. Take advantage of Power over Ethernet (PoE) for highly flexible deployments.







Product Highlights: Equipped with 8 x 100/1000/2.5G Base-T PoE ports
Equipped with 2 x SFP+ ports
Quality of Service (QoS) prioritizes time-sensitive traffic for a smoother network experience
IEEE 802.3az Energy Efficient Ethernet is not just good for the planet, but for your budget as well
Cut the power cable clutter with 802.3af/at Power over Ethernet (PoE)
A wide variety of L2 features to improve switch efficiency, making for a better, faster network
Web-based GUI makes network management as easy as it should be
Easily configure and deploy your equipment with D-Link Network Assistant
Built-in SNMP MIB allows convenient remote management for when you can’t be on premises
Auto-surveillance VLAN allocates bandwidth to surveillance related traffic, guaranteeing seamless footage
Auto-voice VLAN allocates bandwidth to voice related traffic, guaranteeing smooth voice calls
Support for LLDP/LLDP-MED
Loopback detection and cable diagnostics help you troubleshoot network issues










Your Switch in Numbers The DMS-1100 Series feature eight 2.5 Gigabit PoE ports and two dedicated SFP+ ports, altogether offering an impressive 80 Gbps switching capacity. It is perfect for a deployment of Wave 2 access points, while the uplinks provide more than enough bandwidth when accessing the larger local network.



 

A Bridge Between Two Generations The DMS-1100-10TP is a future-ready solution, designed for the upcoming years of connectivity. As more businesses replace older Ethernet with 2.5G to support increasingly powerful access points, you can rest assured this switch will keep on serving you well. It is also a big deal for your CAPEX thanks to backwards compatibility. It can push Cat 5e cabling to its limit, allowing 2.5 Gigabit connectivity over it, so you get the absolute most out of your existing cabling.




Even Safer Surveillance If you have surveillance cameras or related devices attached to your network, putting them onto their own VLAN keeps surveillance footage running seamlessly. The DMS-1100 Series intelligently sorts surveillance traffic automatically into a separate VLAN. It can also head off a variety of malicious attacks by isolating sensitive areas of the network.




PoE for a Rapid Rollout The DMS-1100-10TP is PoE-ready, with a hefty 240W power budget, allowing for a rapid rollout of supported access points. No need to connect your APs to power supplies, simply connect via Ethernet cable and they have all the power they need.















Rich Layer 2 Features • STP, RSTP, MSTP, ERPS
802.1Q/Port/Asymmetric VLAN
Port mirroring
IGMP/MLD Snooping
LACP
D-Link Safeguard Engine
DoS attack prevention 





Intuitive Management D-Link Network Assistant (DNA) utility
Web-based GUI
Built-in SNMP MIB for remote NMS (D-View/DNA) 





Advanced Features Auto Surveillance VLAN
Auto Voice VLAN
Loopback detection
Cable diagnostics
LLDP/LLDP-MED 





Green Technology Power saving features: LED shutof & IEEE 802.3az Energy-Efficient Ethernet (EEE) 








Fast Data, Fast Business When data is running smoothly, so does your business. The DMS-1100 Series is packed with Layer 2 features for a more efficient network and rapid troubleshooting abilities.



Physical Standby Power Consumption PoE on: 293.4 W / PoE off: 38.1 W AC Input 100 to 240 VAC Operating Temperature -5 to 50 °C / 23 to 122 °F Temperature (Storage) -40 to 70 °C / -40 to 158 °F Humidity (Operating) 0% to 95% non-condensing Humidity (Storage) 0% to 95% non-condensing Dimensions 440 x 250 x 44 mm / 17.32 x 9.84 x 1.73 in Weight 3.43 kg / 7.56 lbs General Interfaces 8 x 100/1000/2.5GBASE-T PoE ports / 2 x SFP+ ports Port Standard & Functions IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-X, IEEE 802.3bz 2.5GBASE-T, IEEE 802.3ae 10G over fiber, IEEE 802.3az, IEEE 802.3af/at (DMS-1100-10TP) An installation guide be found in the 

The D-Link DIS-210G-12UP is an industrial smart managed Gigabit switch designed for high-power PoE++ deployments. It features eight Gigabit Ethernet ports and four 1G SFP fibre uplinks, allowing flexible connectivity across copper and fibre networks. With a 240W PoE budget, it can power devices such as high-end IP cameras, wireless access points, and other PoE++ devices directly through the network, reducing the need for separate power supplies.

Key Features of D-Link DIS-210G-12UP 4 x 1G SFP ports for aggregated throughput
8 x Gigabit ports for fast data transmission
IEEE 802.3af/at/bt with 240W PoE power budget
Dual power inputs provide power redundancy
-40°C to 75°C operation for harsh environments
6kV surge protection on Gigabit Ethernet ports
Fanless and IP40-rated design for reliability
Supports Ethernet Ring Protection Switching (ERPS)
Supports L2 management and IP static routing
Proactive OAM via Y.1731, 802.1ag, and 802.3ah
Uninterrupted Power Redundancy The DIS-210G-12UP supports dual power supplies, and each is capable of independently powering the device. The redundancy ensures continuous operation when one power source fails, which minimizes shutdown risk and maintains network performance.

Fast Recovery, Continuous Service The DIS-210G-12UP combines ERPSv1/v2 and Operations, Administration, and Maintenance (OAM) to deliver a highly resilient and easy-to-manage network. ERPS ensures redundant backup paths, preventing loops and providing rapid failover with fault recovery as fast as 50ms. OAM includes a function set (Y.1731, 802.1ag, 802.3ah) that continuously monitors physical connections and virtual circuits, helping network administrators quickly identify issues. Together, these features enhance network reliability, minimize downtime, and maintain a consistent, high-quality service experience.

Built Tough for Demanding Conditions The DIS-210G-12UP is built with a rugged, durable design ideal for harsh environments such as outdoor installations, unconditioned factory floors, and remote sites. With a wide operating temperature range of -40°C to 75°C, it ensures stable and reliable performance even in extreme conditions. Its industrial-grade IP40-rated enclosure protects against dust and solid particles larger than 1mm, while the fanless design and 6kV surge protection on all Ethernet ports help reduce the risk of downtime and enhance long-term reliability.

High Power with PoE+ The DIS-210G-12UP is equipped with eight PoE ports compliant with IEEE 802.3af/at/bt standards, delivering both data and power through a single Ethernet cable. With a total power budget of up to 240W, ports 1 and 2 can supply up to 60W each, while the remaining ports supply up to 30W, making it a great fit for powering devices such as surveillance cameras, IP phones, wireless access points, and IoT sensors. This simplifies installation, enables flexible device placement, and reduces the need for additional electrical infrastructure.

High Redundancy and Reliability The DIS-210G Series supports ERPS quick failover recovery for ring topologies that ensures minimal downtime and avoids any loss of data in mission-critical deployment settings. Meanwhile, the dual power input allows for a redundant power supply to make sure the device continues to operate in the event of a primary power supply failure.

Easy Troubleshooting The DIS-210G Series features loopback detection and a web-based management interface to help network administrators find and solve network problems quickly and easily. Loopback detection is used to detect loops created by a specific port and automatically shuts down the affected port. The web-based interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switches to be controlled from any PC that is connected to the network.

Power Over Ethernet The DIS-210G-06P, DIS-210G-12UP and DIS-210G-12P are PoE-ready switches with a total PoE budget of 120 W and 240 W, DIS-210G-06P and DIS-210G-12P capable of supplying up to 30 W of power per port to connected PoE-enabled devices. The DIS-210G-12UP provides 6 PoE ports using 802.3af and 802.3at, and 2 ports using 802.3bt 60W PoE standards. This effectively reduces deployment times, reduces cable clutter, and eliminates the need for dedicated power supplies to allow PoE-devices to be installed in remote locations.

The DGS-1510-28P s the next generation of SmartPro switch. It contains 24 10/100/1000 Mbps PoE plus 2 Gigabit SFP ports and 2x 10G ports. With its 10G SFP+ ports, the DGS-1510-28P is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch.

The DGS-1510-28P Gigabit Stackable SmartPro Switches with 10G Uplinks is PoE-enabled for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port PoE Switch that provides 24 PoE-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. 

Features:

24 10/100/1000 Mbps PoE+ Ports
Two 10G SFP+ stacking/uplink ports
Two Gigabit SFP Ports
PoE Power Budget - Up to 193W
Extensive Layer 2 features
QoS, bandwidth control
Secure your network
IPv6 ready
Versatile management
Layer 3 traffic management
Energy saving
The DGS-1510-28P's 10/100/1000 Mbps ports are PoE-enabled for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with 802.3af and 802.3at, the DGS-1510-28P supports up to 30W of power output on any particular PoE port up to 193W, providing flexibility in power allocation for a variety of powered devices, including new 802.11ac wireless access points that require 802.3at power for full functionality. Time based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours.

DGS-1510-28P: 24 x 1000Base-T 802.3at PoE 2 x 1GbE SFP 2 x 10GbE SFP+ 193W PoE budget
2 x Smart fans Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security, and manageability for a fraction of the standard cost of ownership. 

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models from the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM not only reduces the number of IP address needed in your network but also allow switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for any specialised stacking cables while at the same time removing the distance barriers that typically limit your topology options when using other stacking technology. 

These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited to VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

Flexibility and scalability

The DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology. 


Extensive Layer 2 features

The DGS-1510 series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. 


QoS, bandwidth control

The DGS-1510 series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. 


Secure your network

D-Link's innovative safeguard engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. 


IPv6 ready

The DGS-1510 series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. 


Versatile management

The DGS-1510 series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease. 


Layer 3 traffic management

The DGS-1510 series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. 


Energy saving

DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.


 



DGS-1510-20 DGS-1510-28 DGS-1510-28X DGS-1510-28P DGS-1510-28XMP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 76 Gbps 92 Gbps 128 Gbps 92 Gbps 128 Gbps 100M/1G Copper  (RJ-45) Ports 16 24 24 24 24 1G/10G SFP/SFP+ Fibre Ports 2/2 2/2 0/4 2/2 0/4 PoE/PoE+ Ports N/A N/A N/A 24 24 PoE Standard N/A N/A N/A  802.3at  802.3at PoE Budget N/A N/A N/A 193 W 370 W PoE Capable Ports N/A N/A N/A Ports 1 to 24: Up to 30 W Ports 1 to 24: Up to 30 W Dimensions 280 x 180 x 44 mm 440 x 210 x 44 mm 440 x 210 x 44 mm 444 x 210 x 44 mm 440 x 308 x 44 mm  

The DBS-2000-28MP Nuclias Cloud-Managed PoE Switch is deployed as pre-configured, zero-configuration switch controlled through the Nuclias Cloud1. They are best-in-class switches designed specifically for distributed networks.

D-Link’s Nuclias Cloud is an innovative cloud networking solution that allows you to centrally manage your entire network from anywhere, any time through its intuitive portal interface or mobile app. Featuring a full range of cloud-managed access points and switches supported by zero- touch deployment, Nuclias Cloud enables small businesses and enterprises to quickly deploy and build a powerful and versatile global wired and wireless network.

Features:

D-Link Nuclias Cloud Management

Centralised cloud-based management
Zero-touch deployment
Intuitive web and app-based interface
Real-time at-a-glance network information
Management of multiple sites and devices through a single pane of glass
Over-the-air firmware updates through the cloud
Instant alerts and notifications
Best-in-class Built for Enterprise Switches

24 x 10/100/1000 BASE-T PoE Ports
4 x 1000 Mbps combo Ports
56 Gbps switching capacity
PoE Budget of 370W
Energy-Efficient Ethernet (EEE)
PoE+ support with up to 30 W per port
Supports 802.1D Spanning Tree (STP) and 802.1w Rapid Spanning Tree (RSTP)
802.3ad Link Aggregation
Loopback protection and IGMP snooping
Access Control Lists (ACLs)
Nuclias cloud-based network management

Manage your network from one place from a browser or through the tablet app, anywhere, anytime. License included

1-year Nuclias Cloud Management license included with the product. Renewal options from 1 to 5 years. Zero-Touch Provisioning

Plug and play, cloud-based auto-configuration. Unlimited scalability

Easy to add or scale back in line with demand. Intuitive web and app-based interface

Easy to use, multi-lingual user interface High switching capacity

Large switching capacity of up to 56 Gbps. PoE up to 370W

Power devices using single Ethernet cables, without relying on nearby power outlets. Limited Lifetime Warranty & Next Day Service

Register to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included. Cloud Networking is easier with Nuclias. D-Link’s Nuclias Cloud-Managed Switches come pre-configured and are controlled remotely through the Nuclias Cloud web-browser interface or Nuclias app. That means your business can enjoy feature-rich yet easy-to-use cloud management, rapid deployments, and unlimited scalability to match the requirements of your network.

Centralised management through a single pane of glass. Manage your entire Nuclias network from anywhere using D-Link’s easy-to-use Nuclias Cloud Management1 platform. Segment the network, manage multiple switches simultaneously, enforce security policies, and monitor live network statistics remotely, all from the cloud with a few clicks. Zero-touch Provisioning

Plug-and-connect deployments without the need for any additional configuration. Switches download their configurations from the cloud for quicker and easier management. Cloud-management simplicity

Nuclias cloud is easy to use, and remote management enables you to monitor and configure your networks from anywhere and doesn’t require any on-site administration, enabling rapid deployments at remote locations. Ready before they’re out of the box. Nuclias Cloud enables businesses to quickly configure, deploy, maintain, and expand the entire network remotely. All without the expenses of on-site staff, maintenance, and additional equipment.

With unlimited scalability, businesses can easily cater to the demands of a growing network by simply adding more Cloud-Managed Switches. Configuration profiles can be created and pushed through the cloud anytime, anywhere. Advanced Layer 2 features and security. While easy to deploy and manage, Nuclias Cloud-Managed Switches are equipped with enterprise-grade features including L2 capabilities such as Link Aggregation Control Protocol (LACP), IGMP snooping, Voice VLAN, Spanning Tree Protocols (STP and RSTP), and a security feature set that includes Access Control Lists (ACLs), port security, and DHCP Server Screening for increased protection. Loopback detection

Used to detect loops created by a specific port and automatically shuts down the affected port. The cable diagnostic feature

Rapidly discovers errors and determines the cable quality, allowing hassle-free diagnostics and maintenance. Monitoring and alerts that keep you ahead. Through the Nuclias dashboard, you can easily view your switches1 real-time port traffic and connection status. And for switches that support PoE, you can monitor real-time power consumption statistics. You can also remotely view real-time information about the network and get an instant overview of key network statistics such as performance, connectivity, and network usage.

It’s easy to customise and filter the dashboard to display only the information that suits you. Be ahead of any problems with instant push notifications and alerts to swiftly identify and resolve problems. 1. Active D-Link Nuclias Cloud account and valid device license required.

Unleash your Wi-Fi 6 capabilities with PoE & Multi-Gigabit ports and effortlessly aggregate your Gigabit network with 10 GB uplink or stacking.

The DGS-1520 Series, a new generation of Lite Layer 3 Stackable Smart Managed Switches, includes four 10 GB ports for uplink or stacking up to a total of eight switches with a total of 80 Gigabit stacking bandwidth. Designed for effortless multi-site network deployments with Zero Touch Provisioning, the DGS-1520 Series is also powerful enough for server and storage applications.

For unrestricted Wi-Fi 6 edge device capabilities, PoE models offer four 2.5 GB Base-T ports for Multi-Gigabit connectivity. For SMBs with expanding networks and significant bandwidth growth, the DGS-1520 effortlessly adds highly cost-effective 10 GB connectivity to ensure seamless aggregation between access and core layers.

The DGS-1520-28MP interface includes 20x 10/100/1000 Base-T PoE ports, 4x 2.5G BaseT PoE ports, 2x 10G BaseT ports and 2x 10G SFP+ ports. It has a 140 Gbps switching capacity and PoE power budget of 370W/740W with RPS.




Key Features

Effortless deployment with Zero Touch Provisioning


Multi-site management via Web GUI


Perfect for SMB access & aggregation layers


Quickly add 10 GB Ethernet upgrade to infrastructure


Power over Ethernet and fiber options with various port combinations

Highlights




Stackable Smart Gigabit

Stack up to eight switches for high-density Gigabit aggregation

Zero Touch Provisioning

Effortless multi-site deployment  



Multi-Gigabit Ports

Four 2.5 GB Base-T ports for Wi-Fi 6 APs (PoE models)

Flexible Stacking or Uplink

10 GB Base-T and/or SFP+ (fiber) ports for stacking or uplink  



High Capacity

140 Gbps switching capacity

PoE Capable

Up to 370 W PoE output per switch  



Power Redundancy

Connect with DPS-520 for power redundancy (non-PoE models)

Advanced Manageability

Supports dynamic routing and selective Q-in-Q tagging  

High Availability

The DGS-1520 Series brings reliable, yet affordable, Gigabit connectivity with four 10-Gigabit ports (two 10G Base-T and two 10G SFP+) for high-speed uplink or stacking. Boost your network performance, simplify your network infrastructure, improve bandwidth and reduce cabling complexity.  

Multi-Gigabit Support

Multi-Gigabit ports on the DGS-1520 Series switch (PoE models only) support 100 MB / 1 GB / 2.5 GB speeds to maximize various device capabilities, such as Wi-Fi 6 (802.11ax) access points, which can often exceed single Gigabit speeds.

* For DGS-1520-28MP & DGS-1520-52MP only  

Minimize Outages with Power Redundancy
* non-PoE models only

For a more resilient network infrastructure, connect up to four DGS-1520 switches (non-PoE models only) with the DPS-520 PoE redundant power supply system through the management port and actively back-up four devices to significantly reduce power redundancy costs.

Auto Discovery: Automatically detect power requirements of connected PD devices. RPS Port

Status Reporting: Administrators can connect via web browser to remotely monitor DPS-520 status.

Priority: Enables administrators to define RPS failover policy.


  Low Network Latency, High PoE Budget

High Gigabit-port density with up to 188 GB total switching capacity, and up to 30 W per port with 370 W total PoE budget to power your PoE-enabled devices.

*DGS-1520-28MP/52MP

Zero Touch Provisioning

Zero Touch provisioning is perfect for multi-site network expansions. Simply preconfigure your network settings in a centralized location, then install the DGS-1520 switches for effortless deployments.

Powerful Stacking Capability

Stack up to eight DGS-1520 switches with a total of 80 GB stacking bandwidth using hybrid mode (copper and/or fiber), increasing flexibility, scalability, and cost effectiveness for SMBs.  

The DGS-1510-28XMP s the next generation of SmartPro switch. It contains 24 10/100/1000 Mbps PoE plus 2 Gigabit SFP ports and 2 10G ports. With its 10G SFP+ ports, the DGS-1510-28P is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch.

The DGS-1510-28P Gigabit Stackable SmartPro Switches with 10G Uplinks is PoE-enabled for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port PoE Switch that provides 24 PoE-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

Features:

24 10/100/1000 Mbps PoE+ Ports
Four 10G SFP+ stacking/uplink ports
PoE Power Budget - Up to 370W
128 Gbps switching capacity
Extensive Layer 2 features
QoS, bandwidth control
Secure your network
IPv6 ready
Versatile management
Layer 3 traffic management
Energy saving
The DGS-1510-28XMP's 10/100/1000 Mbps ports are PoE-enabled for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with 802.3af and 802.3at, the DGS-1510-28P supports up to 30W of power output on any particular PoE port up to 370W, providing flexibility in power allocation for a variety of powered devices, including new 802.11ac wireless access points that require 802.3at power for full functionality. Time based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours.


DGS-1510-28XMP: 24 x 1000Base-T 802.3at PoE 4 x 10GbE SFP+ 370W PoE budget
2 x Smart fans Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security, and manageability for a fraction of the standard cost of ownership. 

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models from the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM not only reduces the number of IP address needed in your network but also allow switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for any specialised stacking cables while at the same time removing the distance barriers that typically limit your topology options when using other stacking technology. 

These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited to VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

Flexibility and scalability

The DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology. 


Extensive Layer 2 features

The DGS-1510 series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. 


QoS, bandwidth control

The DGS-1510 series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. 


Secure your network

D-Link's innovative safeguard engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. 


IPv6 ready

The DGS-1510 series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. 


Versatile management

The DGS-1510 series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease. 


Layer 3 traffic management

The DGS-1510 series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. 


Energy saving

DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.


 



DGS-1510-20 DGS-1510-28 DGS-1510-28X DGS-1510-28P DGS-1510-28XMP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 76 Gbps 92 Gbps 128 Gbps 92 Gbps 128 Gbps 100M/1G Copper  (RJ-45) Ports 16 24 24 24 24 1G/10G SFP/SFP+ Fibre Ports 2/2 2/2 0/4 2/2 0/4 PoE/PoE+ Ports N/A N/A N/A 24 24 PoE Standard N/A N/A N/A  802.3at  802.3at PoE Budget N/A N/A N/A 193 W 370 W PoE Capable Ports N/A N/A N/A Ports 1 to 24: Up to 30 W Ports 1 to 24: Up to 30 W Dimensions 280 x 180 x 44 mm 440 x 210 x 44 mm 440 x 210 x 44 mm 444 x 210 x 44 mm 440 x 308 x 44 mm  

Features 48x 10/100/1000 BASE-T PoE
4x 1000 Mbps combo
104 Gbps switching capacity
370 W PoE Power Budget
Manage your network from one place from a browser or through the app, anywhere, anytime
Easy to use multilingual user interface for single or multi-site management
1-year Nuclias Cloud Management license included with the product. Renewal options from 1 to 5 years
Large switching capacity of up to 104 Gbps
Plug-and-play installation, Nuclias cloud-based auto-configurations.
Power devices using single Ethernet cables, without relying on nearby power outlets
Easy to add or scale back in line with your requirements as a business
Register to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included
Easier With Nuclias D-Link’s Nuclias Cloud-Managed Switches come pre-configured and are controlled remotely through the Nuclias Cloud web-browser interface or Nuclias app. That means your business can enjoy feature-rich yet easy-to-use cloud management, rapid deployments, and unlimited scalability to match the requirements of your network.

Centralised Management Zero-touch Provisioning

Plug-and-connect deployments without the need for any additional configuration. Switches download their configurations from the cloud for quicker and easier management.

Manage your entire Nuclias network from anywhere using D-Link’s easy-to-use Nuclias Cloud Management1 platform. Segment the network, manage multiple switches simultaneously, enforce security policies, and monitor live network statistics remotely, all from the cloud with a few clicks.

Cloud-management Simplicity

Nuclias cloud is easy to use, and remote management enables you to monitor and configure your networks from anywhere and doesn’t require any on-site administration, enabling rapid deployments at remote locations.

Remote Network Expansion Nuclias Cloud enables businesses to quickly configure, deploy, maintain, and expand the entire network remotely. All without the expenses of on-site staff, maintenance, and additional equipment.

With unlimited scalability, businesses can easily cater to the demands of a growing network by simply adding more Cloud-Managed Switches. Configuration profiles can be created and pushed through the cloud anytime, anywhere.

Advanced Layer 2 Features While easy to deploy and manage, Nuclias Cloud-Managed Switches are equipped with enterprise-grade features including L2 capabilities such as Link Aggregation Control Protocol (LACP), IGMP snooping, Voice VLAN, Spanning Tree Protocols (STP and RSTP), and a security feature set that includes Access Control Lists (ACLs), port security, and DHCP Server Screening for increased protection.

Loopback Detection

Used to detect loops created by a specific port and automatically shuts down the affected port.

The Cable Diagnostics Feature

Rapidly discovers errors and determines the cable quality, allowing hassle-free diagnostics and maintenance.

Monitoring & Alerts Through the Nuclias dashboard, you can easily view your switches1 real-time port traffic and connection status. And for switches that support PoE, you can monitor real-time power consumption statistics. You can also remotely view real-time information about the network and get an instant overview of key network statistics such as performance, connectivity, and network usage.

It’s easy to customise and filter the dashboard to display only the information that suits you. Be ahead of any problems with instant push notifications and alerts to swiftly identify and resolve problems.

Port-level Security To ensure the safety and reliability of all sensitive traffic, all switches come with Port Security, and data to and from the cloud is separated from regular data using an SSL encrypted out-of-band connection.

Nuclias Cloud also provides the ability to control user access. You can configure external RADIUS servers to set up IP and MAC-based access control lists to authenticate and authorise clients, to create a safer and trusted network environment.

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to address the needs of small to medium-sized business networks. A unified software image incorporates L2 and L3 features enabling the family to be deployed in a variety of environments and topologies. Together the hardware and software enhancements combine to create a family of powerful, flexible and cost-effective switches.

The DGS-3130-30PS switch has 24 PoE+ gigabit ports with six embedded 10G uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports.

Features:

Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
L3 Features Static Route
RIP
RIPng


DGS-3130-30PS: 24 x 10/100/1000BASE-T PoE Ports
2 x 10GBASE-T
4 x 10G SFP+



Optional Accessories

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply

DPS-700

589 Watt Redundant Power Supply



Highights:

2 x 10GBASE-T, 4x SFP+ 10G ports Physical Stacking Layer 2 Features Layer 3 Features   Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.   Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.   Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.   Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP. RIPv1/v2/ng Static Routing Industry Standard CLI Dual Image   Determines the best route to a destination in the network.   Route Layer 3 traffic between switches, even if they're segmented in VLANs.   Supports a full industry standard Command-Line Interface for system management.   Risk-free configuration testing. Greater port density. Powerful Layer 3 features.

Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments. World-class reliability

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimise recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

PoE+ with budgets up to 740W

The DGS-3130-30PS has a 370W PoE power budget. Or utilise a total of 740W when adding a redundant power supply.

1 When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).

The DIS-300G Series Industrial Gigabit Managed Switches are designed specifically to withstand wide temperature range, vibrations and shock. These rugged, yet easy to deploy, switches have superior environmental specification compared to those of commercial network switches. With its hardened design combined with high availability network features, these switches form vital parts of any network infrastructure facilitating the increasing demand for smart cities, city-wide surveillance and wireless connectivity.

With its comprehensive feature set, DIS-300G-8PSW managed switch is easy to configure, partition and organise user’s network and provide reliable and quality of service.The DIS-300G-8PSW is a PoE Switch which is compliant with both IEEE 802.3af and IEEE 802.3at PoE standards and delivers up to 30 watts power per port along with data on standard Ethernet cabling. These switches can be used to power any IEEE 802.3af/at compliant PoE PD devices, which eliminates the need for additional wiring. They also provide additional PoE power management features which can greatly reduce the deployment effort of planning PoE power budget.

Features

4 x 100/1000BaseT PoE ports, 2 x 100/1000BaseT ports, 2 x 100/1000BaseSFP slots
120 W PoE Power Budget
High availability
Din-Rail and Wall mounting options
Ring Protection with < 20ms
Easy-to-control management interfaces and security
Withstands extreme temperatures
Certified for vibration, shock, free-fall, NEMA-TS2 Section 2, EMC
Fan-less design
Officially Certified.

Industrial Automation Smart city surveillance Intelligent transportation systems Fast ring failover protection of less than 20 milliseconds for critical operations. Faster PROFINET protections available at project request. Endurance certifications for vibration, shock, and free-fall to keep your network resilient and running smoothly. Certified for traffic control such as NEMA-TS2 Section 2 and wayside control standards.



Created to withstand extreme heat and below-freezing temperatures

The DIS switches are designed to easily handle hot and cold temperature variances, and can cold start at their coldest temperatures. With superior environmental protections to commercial switches, these switches are reliable in a huge variety of field applications.

 



Easy to Deploy

Suited to outdoor cabinet environments, the DIS-100G and DIS-300G have multiple mounting options. .

Their compact sizes make efficient use of curbside cabinet space, and they feature snap-to-rail clips for instant deployment.



High Availability

The DIS-300G and DIS-700G series have high availability network features to maximise uptime and ensure automation networks are always working.

Rapid failover for stable connectivity.

Almost instantaneous recovery time of less than 20ms, with even faster PROFINET recovery times available at project request.

Built tough, built to last

With their strong build, the whole family of DIS industrial switches are certified against vibration, shock and free-fall. Comes with D-Link 5-year warranty as standard.



Fanless Design

Heat is steadily dissipated through the rugged build which has been optimised for the transfer of heat.

With no moving parts inside, the DIS family prioritises network uptime reducing the need for maintenance call outs.

The D-Link DIS-310G-24X is a high-performance industrial managed switch designed for demanding network environments. It offers a combination of 24 Gigabit ports, 4 x 10G SFP+ slots, and 4 x 1G SFP ports, providing flexible connectivity for both copper and fibre networks. Built for reliability in harsh conditions, this switch operates across a wide temperature range and supports fanless operation, making it suitable for industrial automation, outdoor installations, and mission-critical infrastructures.

Key Features of D-Link DIS-310G-24X 10G SFP+ ports for long distance connections
Plug-and-play installation
Fanless, passive cooling design
Industrial grade operating temperature (-40~75°C)
High EMS endurance
Durable IP40-rated housing
Dual power input for redundant power supplies
Built-in 6 KV surge protection on copper ports
The DIS-310G-24X Layer 3 Gigabit Industrial Managed Switch is designed specifically to withstand a wide range in temperature change, vibrations and shock. This rugged yet easy to deploy switch has superior environmental specifications compared to those of commercial network switches. With its hardened design combined with high availability network features, this switch forms vital parts of any network infrastructure facilitating the increasing demand for smart cities, city-wide surveillance and wireless connectivity. With its comprehensive feature set, the DIS-310G-24X managed switch is easy to configure, partition and organize user's network and provide reliable and quality of service.

Durable, Reliable, and Efficient The DIS-310G-24X switch is housed in a highly resistant IP40-rated metal casing to protect the switches from harsh environmental conditions. High electromagnetic susceptibility (EMS) protects the DIS-310G-24X from undesirable effects when operating in environments with strong electromagnetic interference. Meanwhile, the fanless design extends the life of the DIS-310G-24X while also enabling them to operate in a wide temperature range from -20 °C up to 75 °C. With DIN rail mounting capability, the DIS-310G-24X can fit seamlessly into your industrial equipment infastructure. In addition, the DIS-310G-24X supports dual power input, which allows for a redundant power supply configuration to make sure the switches continue to operate in the event of a primary power supply failure.

Green Ethernet Technology The DIS-310G-24X features green technology; IEEE 802.3az Energy-Efficient Ethernet (EEE). Energy-Efficient Ethernet reduces the power consumption of the switch when network utilization is low, effectively lowering the cost of ownership during periods of inactivity

The DIS-300G Series Industrial Gigabit Managed Switches are designed specifically to withstand wide temperature range, vibrations and shock. These rugged, yet easy to deploy, switches have superior environmental specification compared to those of commercial network switches. With its hardened design combined with high availability network features, these switches form vital parts of any network infrastructure facilitating the increasing demand for smart cities, city-wide surveillance and wireless connectivity.

With its comprehensive feature set, DIS-300G-14SPW managed switch is easy to configure, partition and organise user’s network and provide reliable and quality of service.The DIS300G-14SPW is a PoE Switch which is compliant with both IEEE 802.3af and IEEE 802.3at PoE standards and delivers up to 30 watts power per port along with data on standard Ethernet cabling. These switches can be used to power any IEEE 802.3af/at compliant PoE PD devices, which eliminates the need for additional wiring. They also provide additional PoE power management features which can greatly reduce the deployment effort of planning PoE power budget.

Features

8 x 100/1000BaseT PoE ports, 2 x 100/1000BaseT ports, 4 x 100/1000BaseSFP slots
240 W PoE Power Budget
High availability
Din-Rail and Wall mounting options
Ring Protection with < 20ms
Easy-to-control management interfaces and security
Withstands extreme temperatures
Certified for vibration, shock, free-fall, NEMA-TS2 Section 2, EMC
Fan-less design
Officially Certified.

Industrial Automation Smart city surveillance Intelligent transportation systems Fast ring failover protection of less than 20 milliseconds for critical operations. Faster PROFINET protections available at project request. Endurance certifications for vibration, shock, and free-fall to keep your network resilient and running smoothly. Certified for traffic control such as NEMA-TS2 Section 2 and wayside control standards.



Created to withstand extreme heat and below-freezing temperatures

The DIS switches are designed to easily handle hot and cold temperature variances, and can cold start at their coldest temperatures. With superior environmental protections to commercial switches, these switches are reliable in a huge variety of field applications.

 



Easy to Deploy

Suited to outdoor cabinet environments, the DIS-100G and DIS-300G have multiple mounting options. .

Their compact sizes make efficient use of curbside cabinet space, and they feature snap-to-rail clips for instant deployment.



High Availability

The DIS-300G and DIS-700G series have high availability network features to maximise uptime and ensure automation networks are always working.

Rapid failover for stable connectivity.

Almost instantaneous recovery time of less than 20ms, with even faster PROFINET recovery times available at project request.

Built tough, built to last

With their strong build, the whole family of DIS industrial switches are certified against vibration, shock and free-fall. Comes with D-Link 5-year warranty as standard.



Fanless Design

Heat is steadily dissipated through the rugged build which has been optimised for the transfer of heat.

With no moving parts inside, the DIS family prioritises network uptime reducing the need for maintenance call outs.

The D-Link (DGS-1510-52XMP) DGS-1510 Series is the latest generation of Smart Managed switches with 10G capability, available with 16, 24, or 48 10/100/1000 Mbps ports plus additional fiber ports for physical stacking or uplinks. The series includes three PoE-capable switches that provide additional flexibility for businesses looking to power IP phones, wireless access points, or IP cameras using existing network infrastructure. The combination of high bandwidth connections and PoE support make the DGS-1510 Series ideal for SmallMedium Enterprise (SME) and Small-Medium Business (SMB) environments.

10G SFP+ Stacking/Uplink Ports

The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Cables (DACs) or any compatible SFP+ transceiver. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient.

Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure and manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks and servers while still maintaining fast data transfer rates.

Layer 3 Traffic Management

The DGS-1510 Series provides static routing, allowing you to segment your network into workgroups that communicate between VLANs and increase application performance. With these capabilities, you can reduce the load on your core devices, allowing you to create a scalable and efficient network.

Extensive Layer 2 Features

The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer.

Network maintenance features include Loopback Detection and Cable Diagnostics Loopback Detection automatically detects and shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can determine cable quality and can quickly discover sections of cabling that need to be replaced.

Traffic Classification and Quality of Servicew

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Managed switches.

This technology consolidates data and surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware and infrastructure. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets.

Keep Your Network Secure

D-Link’s innovative Safeguard Engine helps to protect the DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS-1510 Series supports both MAC and web-based access control. This gives network administrators multiple authentication options, reducing deployment times and removing the need for client software.

The DGS-1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept user traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.

IPv6 Ready

The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 security features, and IPv6 Quality of Service (QoS), ensuring seamless integration with next generation networks. The DGS-1510 Series also supports IPv4/v6 dual stack functionality, which allows the switches to act as a bridge between IPv4 and IPv6 networks.

Versatile Management

The DGS-1510 Series supports virtual stacking via D-Link’s Single IP Management (SIM), allowing up to 32 devices to be managed through a single IP address. This simplifies management of small workgroups or wiring closets while significantly reducing the number of IP addresses needed to manage your network. The DGS-1510 Series supports the D-Link Network Assistant (DNA) utility and a web-based management interface that enables administrators to easily set up and remotely manage their networks, greatly reducing switch deployment time.

The DGS-1510 Series also features an extensive Command Line Interface (CLI) and SNMP support, allowing centralized management of a large number of devices. Out-of-band management of the switches is also available via a designated console port. This provides access to devices in the event that there is a loss of connectivity or that the switch is overloaded with bulk or malicious traffic

Energy Efficient

All of the DGS-1510 Series switches are capable of conserving power without sacrificing operational performance or functionality thanks to D-Link Green 3.0 technology. Using the IEEE 802.3az Energy Efficient Ethernet (EEE) standard, the network will automatically decrease power usage when traffic is low. For environments that do not fully support this standard, these switches offer advanced power-saving settings including port shut-off, LED shut-off and system hibernation based on custom profiles. These profiles can also be applied to the PoE switches so that there is no unnecessary power consumption during off-hours.

*For complete specifications see the documentation tab above.

The DGS-3630 Series Gigabit L3 Stackable Managed Switches are designed for Small to Medium-sized Businesses (SMBs), Small to Medium-sized Enterprises (SMEs), large enterprises, and Internet Service Providers (ISPs). They deliver high performance, flexibility, fault tolerance, and advanced software features for maximum return on investment. With Gigabit Ethernet, SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications..

Standard Software Image

The DGS-3630-28PC/SI comes with the Standard Image which provides core SMB and SME functionality such as L2 switching, entry-level routing, L2 multicast, advanced QoS, Operations, Administration, and Maintenance (OAM), and robust security features. Other software options/upgrades include:

The Enhanced Image supports all the features of the Standard Image in addition to full L3 routing for enterprise integration, including OSPF, BGP, VRF-Lite and L3 multicast. The MPLS Image offers all the features of the Standard and Enhanced Images in addition to VPN services for ISPs, including IS-IS and MPLS L2/L3 VPN. With multiple software images, only the required features need to be installed, providing a flexible approach to software management. The DGS-3630-28PC switch has 20 gigabit PoE+ Ports, 4 Combo SFP Ports and 4 10G uplink/stacking ports.

Features:

High Availability and Flexibility

20 10/100/1000BASE-T ports or 20 SFP ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports
Switch Resource Management (SRM) for flexible management of system resources
6 kV surge protection on all RJ-45 access ports
IEEE 802.3af/at PoE
Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
High Bandwidth Stacking

Physical stack of up to 9 units, 432 GbE ports
Supports long-distance stacking over fiber
80 Gbps per device physical stacking bandwidth

DGS-3630-28PC: 20 x 10/100/1000BASE-T PoE Ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports



Optional Accessories

DEM-310GT

1000BASE-LX, Single-mode, 10 km

DEM-311GT

1000Base-SX Multi-mode Fibre Transceiver

DEM-312GT2

1000BASE-SX Multi-mode,2 km

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply

DPS-700

589 Watt Redundant Power Supply




Stackable Managed Switches

Designed for Small to Medium Businesses, Enterprises and ISPs
Deliver high performance, flexibility, fault tolerance, and advanced software features
Gigabit Ethernet SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches
High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications
Power over Ethernet, which allows PoE-powered devices to be powered by the switch through a standard Ethernet cable.
Versatile Management

The DGS-3630 Series provides: Network Assistant Utility
Industry-standard CLI
Intuitive web-based management interface
Support for SNMP allows centralized management of a large number of devices and out-of-band management is available via a dedicated console port.
A mini-USB console port allows the DGS-3630 Series to be managed without any extra connectors, and a USB Type A port can be used to store logs, configuration, and firmware images.
High Availability and Flexibility

Includes stacking technology, which allows multiple switches to be combined to form a single physical or virtual stack.

Scale your network using just a stacking cable and without the need for stacking modules.

Increased redundancy over multiple physical units, simplifies management and provides a single IP address to manage all members in the stack.

Security, Performance & Availability

Robust set of QoS features helps ensure that critical network services such as Voice over IP and video conferencing are given high priority through the network.

The D-Link Safeguard Engine increases the switch’s reliability, serviceability, and availability by preventing malicious flooding traffic caused by worms or virus attacks.

Power over Ethernet (PoE) Support

The DGS-3630-28PC features Power over Ethernet, which allows PoE-powered devices to be powered by the switch through a standard Ethernet cable. It supports the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, providing up to 30 W of power per port. PoE effectively reduces deployment time for PoE devices such as IP cameras, VoIP phones, and access points, and eliminates the cost for additional electrical cabling. It features a 370 W PoE power budget which can be increased to 740 W when outfitted with the DPS-700 redundant power supply, allowing the switches to power even more devices. Additionally, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates and manages the power feed to IEEE 802.3at PoE+ powered devices for optimal power distribution.

The D-Link DXS-3130-28P is a powerful 10G Layer 3 managed switch designed for high-performance networks. Built for enterprise, SMB, and Metro Ethernet environments, it delivers robust PoE capabilities, stackable scalability, advanced traffic management, and fault-tolerant design. Whether you're deploying in core, aggregation, or access layers, this switch ensures operational continuity, intelligent control, and optimal resource allocation.

Key Features: 24x10G multi-Gigabit ports + 4x10/25G SFP28 uplinks for flexible high-speed connectivity
24 PoE ports supporting up to 60 W each, with a scalable PoE budget from 790 W to 1440 W
Perpetual and Fast PoE ensures uninterrupted power and rapid startup for connected devices
Stack up to 9 units with 200 Gbps bandwidth for scalable and resilient network architecture
Layer 3 routing for intelligent traffic segmentation and flow control
802.1X, MAC/Web-based authentication for secure and managed access
Advanced QoS, IGMP/MLD snooping, and ISM VLAN for optimized traffic shaping and multicast efficiency
Dual hot-swappable power modules for 1+1 redundancy and uninterrupted operation
50ms ERPS recovery, VRRP routing backup, and loopback detection for high availability
High-Speed Versatile Switching Equipped with 24x10GBase-T ports and 4x10/25G SFP28 uplinks, the DXS-3130-28P offers exceptional throughput with flexible multi-gigabit auto-sensing ports and uplinks capable of handling bandwidth-heavy applications.

Power You Can Rely On This switch supports IEEE 802.3af/at/bt standards with each port delivering up to 60 W. The standard 790 W PoE budget can be expanded to 1440 W when dual power supplies are installed, ideal for dense device environments.

Unified the Power, Stack for Success Stack up to 9 DXS-3130-28P units into a single logical switch with up to 200 Gbps of stacking bandwidth. Unified management via one IP address simplifies control and enhances operational continuity.

Built for Unbreakable Networks Featuring hot-swappable power, 50ms ERPS recovery, and VRRP support, this switch ensures consistent uptime. Loopback detection and robust redundancy protocols make it ideal for critical infrastructure.

Optimized Performance for Critical Services Advanced traffic management through QoS, multicast control, and ISM VLAN enables smooth delivery of IPTV, VoIP, and other essential services while preserving bandwidth and ensuring delivery precision.

Advanced Security for Access Integrated support for 802.1X, MAC-based, and Web-based authentication ensures secure user and device onboarding. Ideal for controlled network environments requiring scalable access control.

Connection Diagram Efficient Layer 3 Routing The DXS-3130-28P supports dynamic routing between VLANs and subnets, improving traffic distribution and reducing congestion in large-scale deployments.

.tableheader{ background-color: rgb(0, 137, 174); color: white; } .tablebar{ background-color: rgb(230, 230, 230); color: black; } a { color: white; } DXS-3130 Series Specification Product DXS-3130-28 DXS-3130-28P Interface 24 x 10GE
4 x 25G SFP28 24 x 10GE PoE++
4 x 25G SFP28 Performance Switch Capacity 680 Gbps PoE PoE Standard - IEEE802.3af/at/bt PoE Ports - Ports 1-24 PoE budget - 790W Technical Specifications Surge Protection 6KV surge protection on all Ethernet access ports Console port Yes Power Supply Type Internal CRSP

The DGS-3630 Series Gigabit L3 Stackable Managed Switches are designed for Small to Medium-sized Businesses (SMBs), Small to Medium-sized Enterprises (SMEs), large enterprises, and Internet Service Providers (ISPs). They deliver high performance, flexibility, fault tolerance, and advanced software features for maximum return on investment. With Gigabit Ethernet, SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications..

Standard Software Image

The DGS-3630-52PC/SI comes with the Standard Image which provides core SMB and SME functionality such as L2 switching, entry-level routing, L2 multicast, advanced QoS, Operations, Administration, and Maintenance (OAM), and robust security features. Other software options/upgrades include:

The Enhanced Image supports all the features of the Standard Image in addition to full L3 routing for enterprise integration, including OSPF, BGP, VRF-Lite and L3 multicast. The MPLS Image offers all the features of the Standard and Enhanced Images in addition to VPN services for ISPs, including IS-IS and MPLS L2/L3 VPN. With multiple software images, only the required features need to be installed, providing a flexible approach to software management. The DGS-3630-52PC switch has 44 gigabit PoE+ Ports, 4 Combo SFP Ports and 4 10G uplink/stacking ports.

Features:

High Availability and Flexibility

44 10/100/1000BASE-T ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports
Switch Resource Management (SRM) for flexible management of system resources
6 kV surge protection on all RJ-45 access ports
IEEE 802.3af/at PoE
Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
High Bandwidth Stacking

Physical stack of up to 9 units, 432 GbE ports
Supports long-distance stacking over fiber
80 Gbps per device physical stacking bandwidth

DGS-3630-52PC: 44 x 10/100/1000BASE-T PoE Ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports



Optional Accessories

DEM-310GT

1000BASE-LX, Single-mode, 10 km

DEM-311GT

1000Base-SX-Multi-mode Fibre Transceiver

DEM-312GT2

1000BASE-SX Multi-mode,2 km

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply

DPS-700

589 Watt Redundant Power Supply




Stackable Managed Switches

Designed for Small to Medium Businesses, Enterprises and ISPs
Deliver high performance, flexibility, fault tolerance, and advanced software features
Gigabit Ethernet SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches
High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications
Power over Ethernet, which allows PoE-powered devices to be powered by the switch through a standard Ethernet cable.
Versatile Management

The DGS-3630 Series provides: Network Assistant Utility
Industry-standard CLI
Intuitive web-based management interface
Support for SNMP allows centralized management of a large number of devices and out-of-band management is available via a dedicated console port.
A mini-USB console port allows the DGS-3630 Series to be managed without any extra connectors, and a USB Type A port can be used to store logs, configuration, and firmware images.
High Availability and Flexibility

Includes stacking technology, which allows multiple switches to be combined to form a single physical or virtual stack.

Scale your network using just a stacking cable and without the need for stacking modules.

Increased redundancy over multiple physical units, simplifies management and provides a single IP address to manage all members in the stack.

Security, Performance & Availability

Robust set of QoS features helps ensure that critical network services such as Voice over IP and video conferencing are given high priority through the network.

The D-Link Safeguard Engine increases the switch’s reliability, serviceability, and availability by preventing malicious flooding traffic caused by worms or virus attacks.

Power over Ethernet (PoE) Support

The DGS-3630-52PC features Power over Ethernet, which allows PoE-powered devices to be powered by the switch through a standard Ethernet cable. It supports the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, providing up to 30 W of power per port. PoE effectively reduces deployment time for PoE devices such as IP cameras, VoIP phones, and access points, and eliminates the cost for additional electrical cabling. It features a 370 W PoE power budget which can be increased to 740 W when outfitted with the DPS-700 redundant power supply, allowing the switches to power even more devices. Additionally, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates and manages the power feed to IEEE 802.3at PoE+ powered devices for optimal power distribution.

The DIS-200G Series Industrial Gigabit Smart Managed Switches are equipped with 10 x 10/100/1000BASE-T ports (8 x PoE-enabled) and 2 x SFP ports. These switches feature a robust design making them ideal for deployment in industrial and outdoor cabinet, capable of withstanding harsh environments. The DIS-200G Series furthermore integrates advanced management and security functions to provide a complete industrial networking solution.

Highlights:

8 x 10/100/1000Base-T PoE+ ports, 2x 10/100/1000Base-T ports, 2 x SFP ports
RJ-45 Console port
Easy-to-control management interfaces and security
Withstands severe temperatures
Certified for vibration, shock, free-fall, EMC
Durable and Reliable Design

The DIS-200G Series switches are housed in a highly resistant IP30-rated metal casing to protect them from harsh environmental conditions and withstand wide temperature range, vibrations and shock. The high electromagnetic compatibility (EMC) protects the DIS-200G Series from unwanted effects when operating in environments with strong electromagnetic interference. Meanwhile, the fanless design extends the life of the DIS-200G Series while also being able to operate in a wider temperature range of up to 65 °C. For increased flexibility, the DIS-200G Series can be mounted on a DIN rail or wall-mounted.

Features

Robust and High-Redundancy Design

Fanless, passive cooling design
High EMC endurance
Built-in 6 kV surge protection on copper ports
Ethernet Ring Protection Switching (ERPS)
Dual power input for redundant power supplies
Shock - IEC 60068-2-27, Freefall - IEC 60068-2-32, Vibration - IEC 60068-2-6 certified
Layer 2 Features

IEEE 802.1Q and port-based VLAN
IEEE 802.1p Quality of Service (QoS)
STP/RSTP/MSTP
Port mirroring
Link aggregation
Bandwidth control
Broadcast storm control
IGMP/MLD Snooping
Advanced Features

Auto-Surveillance VLAN 2.0 (ASV 2.0)
Smart Management
Featuring management interfaces, including an industry-standard CLI, and Web-based UI, the DIS-200G Serie is easy to manage and provides the controls to help protect and shape your network. Gigabit Connectivity with SFP ports
Designed with 10 x 10/100/1000BaseT ports and 2 x SFP ports to suit a range of devices and network layouts. Officially Certified
Certifications for vibration, shock, free-fall, electromagnetic, and high-capacity 6 kV surge protection on all copper ports to maximise network uptime in harsh deployment environments. Strong Build
The tough housing has been created to keep your network protected and reliably rugged. That’s why every DIS-switch comes with a 5-year D-Link warranty. High Redundancy and Reliability
ERPS quick failover recovery for ring topologies that ensures minimal downtime and avoids any loss of data in mission-critical deployment settings. Withstands Extreme Temperatures
Operates effortlessly in a range of industrial and harsh environments in temperatures from -40°C to +65°C. Enhanced IP Surveillance
Supports Auto-Surveillance VLAN (ASV), automatically detecting surveillance devices and putting them into a dedicated surveillance VLAN, increasing security of surveillance data, and giving the traffic a higher priority. Fanless Design
With no moving parts inside to reduce downtime and maintenance call outs, the rugged housing has been optimised for the transfer of heat. Fast Deployment
For instant installation it features a snap-to-DIN-rail clip, and also supports wall mounting. PoE Support
With its 240 W PoE+ power budget, it’s been designed to supply data and PoE power to compliant devices, which removes the need for unnecessary plugs and cables and reduces deployment time and effort.



Created to withstand extreme heat and below-freezing temperatures

The DIS switches are designed to easily handle hot and cold temperature variances and can cold start at their coldest temperatures. With superior environmental protections to commercial switches, these switches are reliable in a huge variety of field applications.



Easy to Deploy

Suited to outdoor cabinet environments, the DIS-200G has multiple mounting options.

Their compact sizes make efficient use of curbside cabinet space, and they feature snap-to-rail clips for instant deployment.

 



Fanless Design

Heat is steadily dissipated through the rugged build which has been optimised for the transfer of heat.

With no moving parts inside, the DIS family prioritises network uptime reducing the need for maintenance call outs.

Gigabit Smart Managed Switches - DGS-1100-10MPV2

The DGS-1100 (V2) Series is a range of highly affordable smart-managed switches designed to meet the requirements of small, medium, and enterprise businesses. Advanced management features, bandwidth management, PoE option, diagnostic and troubleshooting tools, and energy-efficient technologies provide a flexible solution to meet your networking requirements

The DGS-1100 (V2) Series is equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping to help businesses protect their network. The switches are also ideal for IP surveillance deployment with the Surveillance VLAN support that gives high priority surveillance traffic to mitigate disruption and guarantee the quality of video recording







Product Highlights: Simple Layer 2 Management
Web-based User Interface
PoE options up to 370W power budget
Limited-Lifetime Warranty after registration







 



Simple. Easy. Smart. DGS-1100 Smart Switch Series provides an affordable solution for environments that require simple network management.






Smart Web UI The DGS-1100's web user interface is an easy way to manage Layer 2 features, such as VLANs, Spanning Tree Protocol (STP), link aggregation (static). With powerful security features like IGMP snooping, Static MAC, and Storm Control, the DGS-1100 Smart family is a versatile solution for environments that require easy to deploy and easy to configure solutions without added complexities.




Easy to Deploy and Manage D-Link’s free Network Assistant (DNA) displays all connected devices and speeds up the first time configuration. The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools. Optional upgrade licenses allow you to broaden your network and analysis.





PoE and Poe+, with budgets up to 370W The DGS-1100 Smart Series includes a range of high power budget PoE-enabled switches for businesses looking to power larger deployments of VoIP phones, wireless access points or network cameras.




Easy Troubleshooting The DGS-1100 Series features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostics feature is designed for network administrators to quickly examine the quality of the copper cables, recognise the cable type, and detect cable errors.

















PhysicalAvailable in multiple configurations, with or without PoE and fibre support
Fanless design for silent operation 





Green Technology Link status detection
IEEE 802.3az Energy-Efficient Ethernet compliant
Time-based PoE (PoE models excluding DGS1100-08PV2) 





Advanced Features IGMP Snooping
Bandwidth Control
IEEE 802.1Q VLAN traffic segregation
Port-based VLAN
IEEE 802.1p Quality of Service
Surveillance VLAN
Voice VLAN 





Management Features Client-based utility or web-based GUI
Built-in SNMP MIB 








 



Physical Power Input • 100 to 240 V AC / 50 to 60 Hz Internal Power Supply MTBF 406,887 hours Operating Temperature -10 to 50 °C / 14 to 122 °F Temperature (Storage) -40 to 70 °C / -40 to 158 °F Humidity (Operating) 0% to 95% non-condensing Humidity (Storage) 0% to 95% non-condensing Dimensions 280 x 180 x 44 mm Weight 1.5 kg An installation guide be found in the 

The DGS-1100-10MPV2/B is a compact, reliable Gigabit Smart Switch designed to deliver enhanced network performance with ease of management. Ideal for small to medium business environments, it offers advanced features such as PoE support, intelligent traffic management, and energy-saving technology to optimize your network infrastructure efficiently.



Key Features of DGS-1100-10MPV2/B: 8 Gigabit PoE Ports with a total power budget of 64W
2 Gigabit Uplink Ports for high-speed connectivity
Smart features including VLAN, QoS, and IGMP Snooping for optimized traffic control
Energy-Efficient Ethernet technology reduces power consumption
Easy web-based management and setup
Fanless design for silent operation


Power over Ethernet (PoE) Support Provides up to 30W per port, allowing you to power devices like IP cameras, wireless access points, and VoIP phones directly through the network cable without needing additional power adapters.





Optimized Network Management Equipped with smart management features, the switch allows easy configuration of VLANs, QoS prioritization, and IGMP Snooping, helping to segment traffic and improve network performance.





Energy-Efficient Design Incorporates IEEE 802.3az Energy-Efficient Ethernet (EEE) to reduce power consumption during low data activity, minimizing operational costs while maintaining high performance.

The all-new DGS-3130 Series Gigabit Layer 3 Stackable Managed Switches are designed to address the needs of small to medium-sized business networks. A unified software image incorporates L2 and L3 features enabling the family to be deployed in a variety of environments and topologies. Together the hardware and software enhancements combine to create a family of powerful, flexible and cost-effective switches.

The DGS-3130-54PS switch has 48 PoE+ gigabit ports with six embedded 10G uplink/stacking ports. Two 10GBASE-T ports and four 10G SFP+ ports.

Features:

Reliability Redundant power supply (RPS) support
Ethernet Ring Protection Switching (ERPS) for single ring topologies
Embedded 6 kV surge protection on all Gigabit Ethernet ports
IEEE 802.3D/802.1s Spanning Tree
Loopback Detection (LBD)
L3 Features Static Route
RIP
RIPng


DGS-3130-54PS: 48 x 10/100/1000BASE-T PoE Ports
2 x 10GBASE-T
4 x 10G SFP+



Optional Accessories

DEM-431XT

SFP+ 10GBASE-SR Multi-Mode Fibre Transceiver (300m)

DEM-432XT

SFP+ 10GBASE-LR Multi-Mode Fibre Transceiver (10 km)

DEM-CB100S

1mt 10G SFP+ Direct Attach Cable (DAC)

DEM-CB300S

3mt 10G SFP+ Direct Attach Cable (DAC)

DPS-500A

AC Redundant Power Supply

DPS-700

589 Watt Redundant Power Supply



Highights:

2 x 10GBASE-T, 4x SFP+ 10G ports Physical Stacking Layer 2 Features Layer 3 Features   Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.   Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.   Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.   Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP. RIPv1/v2/ng Static Routing Industry Standard CLI Dual Image   Determines the best route to a destination in the network.   Route Layer 3 traffic between switches, even if they're segmented in VLANs.   Supports a full industry standard Command-Line Interface for system management.   Risk-free configuration testing. Greater port density. Powerful Layer 3 features.

Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments. World-class reliability

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimise recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

PoE+ with budgets up to 740W

The DGS-3130-30PS has a 370W PoE power budget. Or utilise a total of 740W when adding a redundant power supply.

1 When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).