Product Code: | |
Options: | |
Qty: | |
Unit Price: | £ |
The CableMaster 400/450 is the all-in-one tool for localizing cable faults in data cables, telephone cables and coax cables. The large LCD shows multiple fault situations and gives a "Pass" or "Fail” indication where necessary. Suitable for all installers, telecommunications- and network engineer.
With Voice, Data and Video all being combined and mixed in most installations, it is good to find one solution for testing the complex wire environment that exists in today’s information and entertainment systems. A built in tone generator is useful for tracing faults and finding the termination ends of installed cable of all types. Using the built-in remote and wiremapper sets, one user can identify up to 19 remote and wiremapper sets, one user can identify up to 19 remote cable and locations. Rugged and built for years of use, the CableMaster is the perfect solution for accurate and easy field testing results.
The CableMaster 450 can measure additionally the length of cables.
Features
Additional Features
|
Included
Remotes with Holder - Includes 5 Coax wiremapping remotes, 5 RJ45 wiremapping remotes (ID only), EVA Foam, Coax/RJ Mapper holder – 12 hole, and F-Connector Jack to Jack
Toner Cable RJ45/Alligator - Use when shooting tone via the data port, Cable conductors are terminated on contact #1 and #2, so program your VDV MapMaster to shoot tone on pair 1 and 2.
Optional Accessories
The 7 Remotes - The 7 Remotes can be used as extra Remotes when testing networks and for port identification.
Coax remote Set P/N T120C - ID/MAP 19 video (coax) cables at one time. Numbered custom F remotes 1 thru 19 for easy identification. A real time saver!
Data Remote Set P/N T 121C - ID/MAP 19 data (twisted pair) cables or data ports/jacks at one time. Numbered custom RJ45 remotes 1 thru 19 for easy identification. A real time saver!
General specifications
Measurement Technology |
Time Domain Reflectometry (TDR) and capacity |
Cable Measurements |
Cable Testing and ID: up to 1,000 ft (305 m) |
Power over Ethernet |
Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE |
Active Ethernet |
Indicates advertised speeds of 10/100/1000 base-T half or full duplex |
Reporting |
PDF/CSV reports with PC- Software |
Maximum Voltage |
Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester |
Save Test Results |
Stores up to 250 Cable or network tests with user defined names |
Tone Generation |
Tone Frequencies: 730 Hz and 1440 Hz |
Languages |
English, French, German, Spanish |
Battery Life |
For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery: |
Altitude |
10.000 ft (3048 m) operating |
Temperature |
Operating: 32 to 122°F (0 to 50°C) |
Humidity |
10 to 90% non-condensing |
Enclosure |
High-strength PC/ABS plastic with VO rating with boot |
Display |
Full color graphical LCD with 7,1 cm diagonal |
Size |
1.85"H x 3.6"W x 6.8"L (4.7 x 9.15 x 17.3 cm) |
Weight |
With batteries: 1 lb 2 oz (510 g) |
Safety Compliances |
CE conforming |
The CableMaster 400/450 is the all-in-one tool for localizing cable faults in data cables, telephone cables and coax cables. The large LCD shows multiple fault situations and gives a "Pass" or "Fail” indication where necessary. Suitable for all installers, telecommunications- and network engineer.
With Voice, Data and Video all being combined and mixed in most installations, it is good to find one solution for testing the complex wire environment that exists in today’s information and entertainment systems. A built in tone generator is useful for tracing faults and finding the termination ends of installed cable of all types. Using the built-in remote and wiremapper sets, one user can identify up to 19 remote and wiremapper sets, one user can identify up to 19 remote cable and locations. Rugged and built for years of use, the CableMaster is the perfect solution for accurate and easy field testing results.
The CableMaster 450 can measure additionally the length of cables.
Features
Additional Features
|
Included
Remotes with Holder - Includes 5 Coax wiremapping remotes, 5 RJ45 wiremapping remotes (ID only), EVA Foam, Coax/RJ Mapper holder – 12 hole, and F-Connector Jack to Jack
Toner Cable RJ45/Alligator - Use when shooting tone via the data port, Cable conductors are terminated on contact #1 and #2, so program your VDV MapMaster to shoot tone on pair 1 and 2.
Optional Accessories
The 7 Remotes - The 7 Remotes can be used as extra Remotes when testing networks and for port identification.
Coax remote Set P/N T120C - ID/MAP 19 video (coax) cables at one time. Numbered custom F remotes 1 thru 19 for easy identification. A real time saver!
Data Remote Set P/N T 121C - ID/MAP 19 data (twisted pair) cables or data ports/jacks at one time. Numbered custom RJ45 remotes 1 thru 19 for easy identification. A real time saver!
General specifications
Measurement Technology |
Time Domain Reflectometry (TDR) and capacity |
Cable Measurements |
Cable Testing and ID: up to 1,000 ft (305 m) |
Power over Ethernet |
Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE |
Active Ethernet |
Indicates advertised speeds of 10/100/1000 base-T half or full duplex |
Reporting |
PDF/CSV reports with PC- Software |
Maximum Voltage |
Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester |
Save Test Results |
Stores up to 250 Cable or network tests with user defined names |
Tone Generation |
Tone Frequencies: 730 Hz and 1440 Hz |
Languages |
English, French, German, Spanish |
Battery Life |
For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery: |
Altitude |
10.000 ft (3048 m) operating |
Temperature |
Operating: 32 to 122°F (0 to 50°C) |
Humidity |
10 to 90% non-condensing |
Enclosure |
High-strength PC/ABS plastic with VO rating with boot |
Display |
Full color graphical LCD with 7,1 cm diagonal |
Size |
1.85"H x 3.6"W x 6.8"L (4.7 x 9.15 x 17.3 cm) |
Weight |
With batteries: 1 lb 2 oz (510 g) |
Safety Compliances |
CE conforming |