We will be closing early on Friday 26th April at 17:00
Last orders: 16:30 (next day: 16:00) | OPEN as normal Monday
Product Code: | |
Options: | |
Qty: | |
Unit Price: | £ |
CableMaster 850 - Professional Cabling Tester and Network Diagnostic Tool
CableMaster 850 is a professional cable tester equipped with an RJ45 jack for network cables and an F-type connector for coaxial cables. The CableMaster 800 verifies the wire map, determines the cable length and distance to the fault. The results can be saved and documented using the PC-based reporting software. In addition, the CableMaster 850 offers a multitude of network diagnostics features for trouble-shooting such as cable tracing, link detection up to 1Gb/s, Ping, network discovery, PoE tests and much more.
The CableMaster 850 is perfectly suited for professional installers and network operators who are challenged with testing and troubleshooting network (RJ45) and coaxial cabling in active networks.
Highlights
In The Box
|
General Specification
Measurement Technology |
Time Domain Reflectometry (TDR) and capacity |
Cable Measurements |
Cable Testing and ID: up to 1,000ft (305mtr) Split Pair Detection: 3ft (1mtr) to 1,000ft (305mtr) Length measurement: 0 to 1,500ft (457mtr), ± (5% + 1ft) Supports 8 continuity and ID number remotes (RJ45) Supports 20 RJ45 and 20 F-Connector ID only remotes |
Power over Ethernet |
Tests for IEEE 802.3af and IEEE 802.3at (POE plus) compliant PoE Tests for classes and loads cable up to 25.5 watts (at class 4 identifies Mode A or B (pairs with POE)) |
Active Ethernet |
Indicates advertised speeds of 10/100/1000 base-T half or full duplex Can link to network at 10/100 base-T |
Network Discovery Test |
Discovers and displays attached network devices Ping IPv4/URL/IPv6 DHCP/DNS Test LLDP/CDP identification TCP/UDP Connectivity Test Port LED blink link in 0,1 Hz-steps |
Reporting |
PDF/CSV reports with PC-Software |
Maximum Voltage |
Parameters refer to maximum voltage that can be applied to any 2 connector pins without causing damage to the tester RJ Jack: 66 Vdc or 55 Vac F-Connector: 50 Vdc or Vac |
Save Test Results |
Stores up to 250 Cable or network tests with user defined names |
Tone Generation |
Tone frequencies: 730 Hz and 1440 Hz |
Languages |
English, French, German, Spanish |
Battery Life |
For 6 x AA, 9VDC, 2200 mA-hr (typical) alkaline battery: Operating – 20 hours typical Standby – 1.5 years typical (200 uA max standby current), Batteries are included |
Altitude |
10,000 ft (3048 mtr) operating |
Temperature |
Operating: 32 to 122?F (0 to 50?C) Storage: -22 to 140?F (-20 to 60?C) |
Humidity |
10 to 90% non-condensing |
Enclosure |
High-strength PC/ABS plastic with VO rating with boot Withstands 4ft drop on to concrete |
Display |
Full colour graphical LCD with 7.1cm diagonal |
Size |
1.85”H x 3.6”W x 6.8”L (4.7 x 9.15 x 17.3cm) |
Weight |
With batteries (1lb 2oz (510g) |
Safety Compliances |
CE Conforming |
CableMaster 850 - Professional Cabling Tester and Network Diagnostic Tool
CableMaster 850 is a professional cable tester equipped with an RJ45 jack for network cables and an F-type connector for coaxial cables. The CableMaster 800 verifies the wire map, determines the cable length and distance to the fault. The results can be saved and documented using the PC-based reporting software. In addition, the CableMaster 850 offers a multitude of network diagnostics features for trouble-shooting such as cable tracing, link detection up to 1Gb/s, Ping, network discovery, PoE tests and much more.
The CableMaster 850 is perfectly suited for professional installers and network operators who are challenged with testing and troubleshooting network (RJ45) and coaxial cabling in active networks.
Highlights
In The Box
|
General Specification
Measurement Technology |
Time Domain Reflectometry (TDR) and capacity |
Cable Measurements |
Cable Testing and ID: up to 1,000ft (305mtr) Split Pair Detection: 3ft (1mtr) to 1,000ft (305mtr) Length measurement: 0 to 1,500ft (457mtr), ± (5% + 1ft) Supports 8 continuity and ID number remotes (RJ45) Supports 20 RJ45 and 20 F-Connector ID only remotes |
Power over Ethernet |
Tests for IEEE 802.3af and IEEE 802.3at (POE plus) compliant PoE Tests for classes and loads cable up to 25.5 watts (at class 4 identifies Mode A or B (pairs with POE)) |
Active Ethernet |
Indicates advertised speeds of 10/100/1000 base-T half or full duplex Can link to network at 10/100 base-T |
Network Discovery Test |
Discovers and displays attached network devices Ping IPv4/URL/IPv6 DHCP/DNS Test LLDP/CDP identification TCP/UDP Connectivity Test Port LED blink link in 0,1 Hz-steps |
Reporting |
PDF/CSV reports with PC-Software |
Maximum Voltage |
Parameters refer to maximum voltage that can be applied to any 2 connector pins without causing damage to the tester RJ Jack: 66 Vdc or 55 Vac F-Connector: 50 Vdc or Vac |
Save Test Results |
Stores up to 250 Cable or network tests with user defined names |
Tone Generation |
Tone frequencies: 730 Hz and 1440 Hz |
Languages |
English, French, German, Spanish |
Battery Life |
For 6 x AA, 9VDC, 2200 mA-hr (typical) alkaline battery: Operating – 20 hours typical Standby – 1.5 years typical (200 uA max standby current), Batteries are included |
Altitude |
10,000 ft (3048 mtr) operating |
Temperature |
Operating: 32 to 122?F (0 to 50?C) Storage: -22 to 140?F (-20 to 60?C) |
Humidity |
10 to 90% non-condensing |
Enclosure |
High-strength PC/ABS plastic with VO rating with boot Withstands 4ft drop on to concrete |
Display |
Full colour graphical LCD with 7.1cm diagonal |
Size |
1.85”H x 3.6”W x 6.8”L (4.7 x 9.15 x 17.3cm) |
Weight |
With batteries (1lb 2oz (510g) |
Safety Compliances |
CE Conforming |