| Product Code: | |
| Options: | |
| Qty: | |
| Unit Price: | £ |
If you wish to enquire about this product please contact us on
0800 488 0000
| Part No: | LIN41238 |
| Manufacturer No: | 41238 |
| Delivery: | In Stock: 5-7 Days |
 |
Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p
connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
10 Year Warranty
RF-BLOK shielding design:
Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
Increased insulation resistance up to 25%
No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
Tight fit of internal wires as there is no inner mould
No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
Smaller overall dimensions which allows more room behind the host or peripheral
Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one
Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p
connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
10 Year Warranty
RF-BLOK shielding design:
Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
Increased insulation resistance up to 25%
No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
Tight fit of internal wires as there is no inner mould
No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
Smaller overall dimensions which allows more room behind the host or peripheral
Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one
