Eaton ePDU: Switched IEC - 0U - In: C20 16A 1P - Out C13, 20 : C19, 4

Overview

Switch outlets & IT equipment across A and B feed + meter the input and branch circuits.

ePDU G3 Switched models allow lights-out control of devices including switching devices powered across multiple ePDUs. They include IEC Class 1 (±1%) billing grade accuracy, an advanced hot-swap meter with LCD pixel display showing V, W, A and kWh, and the ability to daisy chain 8 ePDUs to share the same network connection and IP address.

Features

• Securely allows remote control and remote rebooting
• Highly secure with Admin controlling user access permission, password protection and SSL configurable to 1024 or 2048 bit
• Switch equipment on/off across both A and B feed (Requires Daisy Chained ePDUs)
• Sequence outlets to avoid in-rush current, to ensure equipment starts in the correct order
• Input and Phase Metering, Circuit Breaker Current Metering
• IEC outlet eGrip plug retention: retains all standard IEC plugs
• 60 Degree C operating temperature
• Colour-coded outlet and branch circuits for simple load balancing
• Eaton Hydraulic–Magnetic Circuit Breakers with accidental trip protection
• Low-profile form factor: 52mm wide x 53mm deep x 1604mm high
• En masse configuration and update available via Intelligent Power Manager software
• Single Pane Monitoring of many ePDUs+UPS as part of the power chain, & graceful Equipment shut down via Intelligent Power Manager software
• Installation: Button mounting on rear & side + variable mounting system

Small with Flexible Mounting: Easily access hot-swappable IT equipment and components

• ePDUs are available in 0U to fit vertically on the back of a rack, or in 1U/2U to be mounted horizontally in any server rack
• Ensure the ePDU, plugs and cables are completely out of the way of equipment with button mount on the rear and sides
• Optionally side mount to face the rear doors of the rack to ensure the ePDU, plugs and cables don’t interfere with hot-swap IT equipment
• Choose to raise or lower the ePDU in the rack to suit your installation
• The unique patented variable mounting system can be mounted at any point on the ePDU and gives full flexibility

Daisy Chain

Daisy-Chain 8 ePDUs from one IP port and one IP address: this reduces the cost of networking, reduces IP addresses and data packets on the network. Daisy Chaining reduces network infrastructure costs by up to 87%.

Integrated Grip

IEC Plug Retention: Prevents accidental disconnect from being bumped or from vibration. Works with any IEC plug, no need to buy special cables or brackets.

Easy Configuration

includes a central advanced LCD display with a menu system. Change settings incl. IP address, configure via USB stick copy/paste configuration file or configure En Masse via IPM software.

Low profile chassis

The ePDU doesn’t protrude into the rack and is low profile even at the breakers. 52mm wide x 53mm high and 58.7mm at breakers on most models. Hydraulic-Magnetic Circuit Breakers include accidental-tip protection by default.

No Downtime on Upgrades

ePDU G3 has Hot-Swap network components - update or change without changing the outlet state.