TP-Link TL-SG1006PP 6-Port Gigabit Desktop Switch with 3-Port PoE+ and 1-Port PoE++

The TL-SG1006PP is a 6-port Gigabit switch designed to simplify connectivity, featuring PoE+ and PoE++ capabilities to deliver both data and power over a single cable. Benefit from IEEE compliance, QoS support, and automatic PoE device recovery for seamless operation.

Features

• 6× 10/100/1000 Mbps RJ45 ports
• With one PoE++ port and three PoE+ ports, transfers data and power on one single cable
• Works with IEEE 802.3af/at/bt compliant PDs
• 802.1p/DSCP QoS enable smooth latency-sensitive traffic
• Supports PoE Power up to 30 W for each PoE+ port and 60W for PoE++ port
• Supports PoE Power up to 64 W for all PoE ports*
• Up to 250m data and power transmitting range under Extend Mode**
• PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
• Plug and Play, no configuration and installation required

What's in the box

• TL-SG1006PP
• Power Adapter
• Installation Guide

Specifications

• Interface:
  • 6× 10/100/1000Mbps RJ45 Ports
  • AUTO Negotiation
  • AUTO MDI/MDIX
• Fan Quantity: Fanless
• Power Supply: External Power Adapter (Output: 53.5 VDC / 1.31 A)
• Dimensions: 6.2x4.0x1.0 in (158x101x25 mm)
• Mounting: N/A - Desktop Switch
• Power Consumption: 4.75 W (220/50 Hz. no PD connected), 71.46 W (220/50 Hz. with 64 W PD connected)
• Performance:
  • Packet Forwarding Rate: 8.928 Mpps
  • Switching Capacity: 12 Gbps
• Advanced Features:
  • Compatible With IEEE 802.3af/at/bt Compliant PDs
  • Mac Address Auto-Learning And Auto-Aging
  • IEEE 802.3x Flow Control
  • 802.1p/DSCP QoS
  • IGMP Snooping
  • Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission)
  • PoE Auto Recovery (Ports 1-4)
• Management: N/A - Unmanaged Switch
• System Requirements: N/A

*For complete specification see the documentation tab above