Hi there! Our website may store cookies on your computer in order to give you
the best experience, such as remembering the items in your cart so you
can continue shopping where you left off.
By continuing to use our site, you give consent for cookies to be used.
On-line double conversion UPS with automatic bypass, 3000VA/2700W, modular (2N or N+1) with ModularEasy kit, versatile Tower/Rack3U short depth, multilingual LCD display, 8 IEC 10A outlets including 4 Powershare + 1 IEC 16A, hot swappable batteries, power management software, USB and Serial port, slot for optional management card
Maximum availability
Configuration. Double conversion on-line UPS with automatic by-pass and power factor correction.
Continuous power supply. Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the battery to be replaced without interrupting the power supply
Powershare. The Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time. It also provides remote reboot and sequential start-up as standard.
Long backup times. 1 to 4 EXB battery units can be added to the Pulsar M. The Pulsar 3000XL has a built-in high speed charger for additional long backup times.
Minimum total cost of ownership
Easy operation. Multilingual display. Access to a wide range of measurements and set-up menus.
Remote supervision. A wide range of options using the Solution-Pac supplied: SNMP and HTML, ( Network Management Card included with Netpack versions), ModBus/JBus and relay outputs.
Totally adaptable
Format. Pulsar M is available in RT2U convertible rack/tower version (optimised for rack mounting) or RT3U (for tower or shallow rack).
Connections. With FlexPDU and HotSwap MBP the Pulsar M can be connected by sockets or terminal blocks. They can be installed as required behind, on the side or on top of the unit.
Compatible with high power factor loads. Pulsar M is rated for 0.9 total power factor
Interfaces . USB + serial + remote start/stop + slot for optional communications card.
Technical specifications
Technology
ON-LINE double conversion with automatic bypass and Power factor correction system
8 IEC C13 (10A) + 1 IEC C19 (16A) outlet, including 2 groups of 2 IEC 10A Powershare outlets
Input voltage range
100/120/160 to 284V (for load level <20% / <33% / <66% / >=66% of rated output)
Output voltage
230V (adjustable to 200/208/220/240/250 V)
Frequency
Input range : 40-70 Hz, Output range : 50/60 Hz auto select or frequency converter mode
Features
Power factor correction system, Remote power off, Frequency converter mode (with 15% power derating), Cold start
Battery features
Automatic weekly test (periodicity adjustable via LCD display or software)
User interface
3 LEDS + Multilingual LCD : access to measures, alarm messages and customization
Warranty
2 years – Optional 3 years warranty with Warranty+ (depending on country)
Administration
1 USB port + 1 serial RS232 & contacts port + 1 mini-terminal block for remote ON/OFF & Remote Power Off, 1 slot for NMC Minislot 2006 Edition or NMC ModBus/Jbus or MC Contacts/Serial
On-line double conversion UPS with automatic bypass, 3000VA/2700W, modular (2N or N+1) with ModularEasy kit, versatile Tower/Rack3U short depth, multilingual LCD display, 8 IEC 10A outlets including 4 Powershare + 1 IEC 16A, hot swappable batteries, power management software, USB and Serial port, slot for optional management card
Maximum availability
Configuration. Double conversion on-line UPS with automatic by-pass and power factor correction.
Continuous power supply. Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the battery to be replaced without interrupting the power supply
Powershare. The Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time. It also provides remote reboot and sequential start-up as standard.
Long backup times. 1 to 4 EXB battery units can be added to the Pulsar M. The Pulsar 3000XL has a built-in high speed charger for additional long backup times.
Minimum total cost of ownership
Easy operation. Multilingual display. Access to a wide range of measurements and set-up menus.
Remote supervision. A wide range of options using the Solution-Pac supplied: SNMP and HTML, ( Network Management Card included with Netpack versions), ModBus/JBus and relay outputs.
Totally adaptable
Format. Pulsar M is available in RT2U convertible rack/tower version (optimised for rack mounting) or RT3U (for tower or shallow rack).
Connections. With FlexPDU and HotSwap MBP the Pulsar M can be connected by sockets or terminal blocks. They can be installed as required behind, on the side or on top of the unit.
Compatible with high power factor loads. Pulsar M is rated for 0.9 total power factor
Interfaces . USB + serial + remote start/stop + slot for optional communications card.
Technical specifications
Technology
ON-LINE double conversion with automatic bypass and Power factor correction system
Power ratings
3000 VA / 2700 W
Dimensions (H x W x D*)/Weight
440 x 131 x 490 mm / 30 kg
Output connections
8 IEC C13 (10A) + 1 IEC C19 (16A) outlet, including 2 groups of 2 IEC 10A Powershare outlets
Input voltage range
100/120/160 to 284V (for load level <20% / <33% / <66% / >=66% of rated output)
Output voltage
230V (adjustable to 200/208/220/240/250 V)
Frequency
Input range : 40-70 Hz, Output range : 50/60 Hz auto select or frequency converter mode
Features
Power factor correction system, Remote power off, Frequency converter mode (with 15% power derating), Cold start
Battery features
Automatic weekly test (periodicity adjustable via LCD display or software)
User interface
3 LEDS + Multilingual LCD : access to measures, alarm messages and customization
Warranty
2 years – Optional 3 years warranty with Warranty+ (depending on country)
Administration
1 USB port + 1 serial RS232 & contacts port + 1 mini-terminal block for remote ON/OFF & Remote Power Off, 1 slot for NMC Minislot 2006 Edition or NMC ModBus/Jbus or MC Contacts/Serial
Due to the size, weight and delicate nature of Data and Server Cabinets, specialist couriers are required so they arrive on site in pristine condition.
We do our utmost to bare the delivery costs meaning we can deliver your cabinet free of charge to most areas, unfortunately there are some areas of the UK we are charged a lot more to deliver to and whilst we absorb as much of this cost as we viably can in certain cases we have to pass on some of these costs. Below is a list of these areas and the additional costs of delivery per cabinet.
