Eaton Pulsar 1000VA 2u Rackmount/Tower UPS

Part No.:

EA68182

Manufacturer No.: 68182

Eaton Pulsar 1000VA 2u Rackmount/Tower UPS

Discontinued

This product is no longer available from Comms Express.

Twitter/Facebook

Overview

Details

On-line double conversion UPS with automatic bypass, 1000VA/900W, Rack/Tower versatile, multilingual LCD display, 6 IEC 10A outlets including 3 Powershare, hot swappable batteries, power management software, USB and Serial port + contacts, slot for optional management card

Maximum availability

Configuration. Double conversion on-line UPS with automatic by-pass and power factor correction.
Powershare. The Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time and provide remote reboot and sequential start-up as standard.
Continuous power supply. Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the batteries to be replaced without interrupting the power supply
Long backup times. 1 to 4 EXB battery units can be added to the Pulsar 1000 or 1500.

Minimum Total Cost of Ownership

Easy operation. Multilingual display. Access to a wide range of measurements and set-up menus.
Remote supervision. A wide range of options using the Solution-Pac supplied: SNMP and HTML , ModBus/JBus and relay outputs

Totally adaptable Pulsar has unmatched adaptability.

Format. Pulsar is available in tower format or RT2U convertible rack/tower version (for shallow rack mounting).
Connections. With FlexPDU and HotSwap MBP, the RT2U models can be connected by sockets or terminal blocks. They can be installed as required behind, on the side or on top of the unit.
Compatible with high power factor loads. Pulsar is rated for 0.9 total power factor (1500VA/1350 W, 1000VA/900W and 700VA/630W)
Interfaces. USB + serial + remote start/stop + slot for optional communications card

Technical specifications
Technology	ON-LINE double conversion with automatic bypass and Power factor correction system
Power ratings	1000 VA / 900 W
Dimentions/Weight	86.5 x 438 x 483 mm / 18 kg
Output connections	6 IEC C13 (10A) outlets , including 3 Powershare outlets (2 groups : 2 + 1 IEC)
Input voltage range	100/120/160 to 284V (for load level <20% / <33% / <66% / >=66% of rated output)
Output voltage	230V (adjustable to 200/208/220/240/250 V)
Frequency	Input range : 40-70 Hz, Output range : 50/60 Hz auto select or frequency converter mode
Features	Power factor correction system, Remote power off, Frequency converter mode (with 15% power derating), Cold start
Battery features	Automatic weekly test (periodicity adjustable via LCD display or software)
User interface	3 LEDS + Multilingual LCD : access to measures, alarm messages and customization
Administration	1 USB port + 1 serial RS232 & contacts port + 1 mini-terminal block for remote ON/OFF & Remote Power Off, 1 slot for NMC Minislot 2006 Edition or NMC ModBus/Jbus or MC Contacts/Serial
Standards and certifications	IEC/EN 62040-3; IEC/EN 62040-1 -1; IEC/EN 60950-1 (RD), IEC/EN 62040-2 C1 class, CE, TüV GS, CB report, TüV-US

Configuration. Double conversion on-line UPS with automatic by-pass and power factor correction.

Powershare. The Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time and provide remote reboot and sequential start-up as standard.

Continuous power supply. Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the batteries to be replaced without interrupting the power supply

Long backup times. 1 to 4 EXB battery units can be added to the Pulsar 1000 or 1500.

Minimum Total Cost of Ownership

Easy operation. Multilingual display. Access to a wide range of measurements and set-up menus.

Remote supervision. A wide range of options using the Solution-Pac supplied: SNMP and HTML , ModBus/JBus and relay outputs

Totally adaptable Pulsar has unmatched adaptability.

Format. Pulsar is available in tower format or RT2U convertible rack/tower version (for shallow rack mounting).

Connections. With FlexPDU and HotSwap MBP, the RT2U models can be connected by sockets or terminal blocks. They can be installed as required behind, on the side or on top of the unit.

Compatible with high power factor loads. Pulsar is rated for 0.9 total power factor (1500VA/1350 W, 1000VA/900W and 700VA/630W)

Interfaces. USB + serial + remote start/stop + slot for optional communications card

Technical specifications

Technology

ON-LINE double conversion with automatic bypass and Power factor correction system

Power ratings

1000 VA / 900 W

Dimentions/Weight

86.5 x 438 x 483 mm / 18 kg

Output connections

6 IEC C13 (10A) outlets , including 3 Powershare outlets (2 groups : 2 + 1 IEC)

Input voltage range

100/120/160 to 284V (for load level <20% / <33% / <66% / >=66% of rated output)

Output voltage

230V (adjustable to 200/208/220/240/250 V)

Frequency

Input range : 40-70 Hz, Output range : 50/60 Hz auto select or frequency converter mode

Features

Power factor correction system, Remote power off, Frequency converter mode (with 15% power derating), Cold start

Battery features

Automatic weekly test (periodicity adjustable via LCD display or software)

User interface

3 LEDS + Multilingual LCD : access to measures, alarm messages and customization

Administration

1 USB port + 1 serial RS232 & contacts port + 1 mini-terminal block for remote ON/OFF & Remote Power Off, 1 slot for NMC Minislot 2006 Edition or NMC ModBus/Jbus or MC Contacts/Serial

Standards and certifications

IEC/EN 62040-3; IEC/EN 62040-1 -1; IEC/EN 60950-1 (RD), IEC/EN 62040-2 C1 class, CE, TüV GS, CB report, TüV-US