We will be closing early on Thursday 28th March at 16:30
Last orders: 16:00 (next day: 15:30) | CLOSED - Good Friday & Easter Monday
Product Code: | |
Options: | |
Qty: | |
Unit Price: | £ |
If you wish to enquire about this product please contact us on
0800 488 0000
A compact 1U in height and available in 16A and 30A versions, Multi Switch ATS is an easy to use automatic transfer switch that delivers redundant power to multiple devices from 2 independent AC input power sources.
Protects against both load faults and power supply failures. Provides direct distribution from 2 input power sources (2x mains supply, 2x UPS, or a combination). Communications slots allow for easy LAN connections and remote management through software like PowerShield³.
The 16 A model has 9 IEC sockets (8x 10A plus 1x 16A), while the 30A version incorporates 5 IEC sockets (4x 10A plus 1 x 16A) along with a terminal board for additional connections. This enables you to protect several devices without the need for extra PDUs.
MTA connects from two input power sources, either 2 different mains supplies, 2 UPS systems (including UPS of various sizes/types), or a mix of mains and UPS. If there’s a failure with the primary input, it automatically switches to the secondary source.
If there’s a load failure (i.e. a short circuit), Multi Switch ATS immediately cuts off any of the sockets connected to the load. If there’s a power supply failure with the primary input source, it automatically switches the load to the secondary input. In cases where the 2 sources are in phase, the transfer is instantaneous (< 8 msec).
But even with non-synchronous supplies, the transfer is so quick that it won’t have any negative impact on the connected devices. Switching is comfortably below the 21 msec hold-up time outlined in the Server System Infrastructure (SSI) standard).
A compact 1U in height and available in 16A and 30A versions, Multi Switch ATS is an easy to use automatic transfer switch that delivers redundant power to multiple devices from 2 independent AC input power sources.
Protects against both load faults and power supply failures. Provides direct distribution from 2 input power sources (2x mains supply, 2x UPS, or a combination). Communications slots allow for easy LAN connections and remote management through software like PowerShield³.
The 16 A model has 9 IEC sockets (8x 10A plus 1x 16A), while the 30A version incorporates 5 IEC sockets (4x 10A plus 1 x 16A) along with a terminal board for additional connections. This enables you to protect several devices without the need for extra PDUs.
MTA connects from two input power sources, either 2 different mains supplies, 2 UPS systems (including UPS of various sizes/types), or a mix of mains and UPS. If there’s a failure with the primary input, it automatically switches to the secondary source.
If there’s a load failure (i.e. a short circuit), Multi Switch ATS immediately cuts off any of the sockets connected to the load. If there’s a power supply failure with the primary input source, it automatically switches the load to the secondary input. In cases where the 2 sources are in phase, the transfer is instantaneous (< 8 msec).
But even with non-synchronous supplies, the transfer is so quick that it won’t have any negative impact on the connected devices. Switching is comfortably below the 21 msec hold-up time outlined in the Server System Infrastructure (SSI) standard).