Hi there! Our website may store cookies on your computer in order to give you
the best experience, such as remembering the items in your cart so you
can continue shopping where you left off.
By continuing to use our site, you give consent for cookies to be used.
Next working day delivery to most UK Mainland postcodes on orders placed before 17:30 Monday to Friday. Additional charges may apply dependant on location, floor standing cabinets and other heavy/bulky items.
£1495.00
£1794.00 Inc VAT
747
Earn 747 Data Points when purchasing this product. More Info
Sorry, this item is no longer available from Comms Express.
Delivery to UK Mainland on orders placed before 4:30pm Mon-Fri currently estimated 1-2 Working Days due to current service disruption. Additional charges may apply dependant on location, floor standing cabinets and other heavy/bulky items.
The LinkRunner AT offers user-configured auto-tests for a wide range of important tasks. This network tester’s quick cable test and switch identification facilitates fast problem isolation.
Test results can be automatically uploaded to the Link-Live cloud service to improve collaboration between network engineers and technicians, creating greater job visibility, project control, and fleet management. Validate vital functions of copper or fiber Gigabit Ethernet links in less than 10 seconds with the comprehensive AutoTest.
Discover nearest switch name and port information via CDP/LLDP/EDP and verify link speed/duplex and connectivity to TCP/IP network with AutoTest.
Validate up to 30W 802.3af/at PSE with TruePower™ loaded Power over Ethernet (PoE) test.
Verify twisted-pair cable length and wire-map in a snap.
Automate reporting and enable collaboration with upload and management test results via Link-Live Cloud Service.
Twisted-pair/copper cable test (LRAT-1000 and LRAT-2000 models), fiber optic testing (LRAT-2000 only)
Cable Length, Wiremap, and Location
Cable Location
Locate cable runs with toning, switch port advertisement, switch port link light blinking, and remote cable identifiers. Toning supports both analog and digital IntelliTone modes.
Cable Wiremap and Length
Check patch cables using the built-in wiremap port, including pin-to-pin connection, or installed wiring for length, shorts, or opens or split pairs. Easily find opens, shorts, miswires, and split pairs three different ways:
On non-terminated cable
With a WireView Cable Identifier
With the built-in wiremap port on the side of the LinkRunner AT
The LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP), plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.
The LinkRunner AT displays critical nearest switch information includes:
Switch name and model
IP address
Chassis, slot, and port
VLAN IDs
Duplex and speed (actual and advertised)
Signal Strength
Connection (MDI or MDI/X)
PoE voltage and power (actual and test limit)
Graphical representation of power on pairs
1 Gig link on copper with PoE on port 30
1 Gig link on fiber on port 6
Packet Reflector
The LinkRunner AT packet reflector mode allows it to be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1Gbps. The reflector mode can be configured to swap MAC and/or IP addresses.
LinkRunner AT 2000 supports packet reflection for:
OptiView® XG Network Analysis Tablet
OneTouch™ AT Network Assistant
EtherScope™ Network Assistant
MetroScope™ Service Provider Assistant
Any device generating 802.3 frame or IP packet streams
Automated Test Results Management to Link-Live Cloud Service
Serving as a centralized test results and device management system, the complimentary Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud Service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.
An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.
This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:
Reduce results management overhead for multiple testers and users
Enables seamless collaboration between site personnel and remote experts
Simplify report generation across media types for network deployment documentation
Attach photos, user comments to each result, adding context for future changes and troubleshooting
For asset management, ability to associate serial numbers of installed devices, and/or cable/wall jack label to specific test
Local Reporting Mode
Alternatively, you can enable the Local Reporting Mode to facilitate saving of AutoTest results on the tester. For AutoTest results saved locally on the tester, the included MS windows-based LinkRunner AT Manager Software facilitates management and analysis of test results, test reports, and testers.
Technical Specification
General
Dimensions
3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Typical operating life is 6 hours; Typical charge time is 3 hours
Display
5.0 in color LCD with capacitive touch screen (480 x 800 pixels)
Keypad
1-key elastometric (power only)
External AC Adapter/Charger
AC input 90 to 264V AC 48 to 62 Hz input power DC output 15V DC at 1.2 Amps
Tone Generator
IntelliTone™ digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]
Media Access; Copper
RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at)
Media Access; Fiber
SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only)
Cable Tests
Pair lengths, opens, shorts, splits, crossed, straight through, and cable ID
Power over Ethernet (PoE)
Single ended testing: User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation The following PSE PoE parameters are measured: Pairs used Received class PSE type Unloaded voltage(V) Loaded voltage (V) (LRAT-2000 with TruePower™) Unloaded power (W) (LRAT-1000) Loaded power (W) (LRAT-2000 with TruePower™)
Supporting Operating Systems
Windows® 8.1 and Windows® 10 Minimum hardware requirement: Processor: 1 GHz or better CPU RAM: 1 GB or more Hard Disk: 1 MB available space Display: 1024 x 768 high color, 32-bit (recommended) Interface: USB
Environmental
Operating Temperature and Relative Humidity
32°F to 113°F (0°C to +45°C) Note: The battery will not charge if the internal temperature of the tester is above 113°F (45°C)
Operating Relative Humidity (% RH without condensation)
90% (50°F to 95°F; 10°C to 35°C) 75% (95°F to 113°F; 35°C to 45°C)
Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association
LinkRunner AT Manager Software
Supporting Operating Systems
Windows® 8.1 and Window®10
Processor
1 Ghz or better
RAM
1 GB or more
Hard Disk
1 GB available space
Display
1024 x 768 high color, 32-bit (recommended)
Interface
USB
The LinkRunner AT offers user-configured auto-tests for a wide range of important tasks. This network tester’s quick cable test and switch identification facilitates fast problem isolation.
Test results can be automatically uploaded to the Link-Live cloud service to improve collaboration between network engineers and technicians, creating greater job visibility, project control, and fleet management. Validate vital functions of copper or fiber Gigabit Ethernet links in less than 10 seconds with the comprehensive AutoTest.
Discover nearest switch name and port information via CDP/LLDP/EDP and verify link speed/duplex and connectivity to TCP/IP network with AutoTest.
Validate up to 30W 802.3af/at PSE with TruePower™ loaded Power over Ethernet (PoE) test.
Verify twisted-pair cable length and wire-map in a snap.
Automate reporting and enable collaboration with upload and management test results via Link-Live Cloud Service.
Twisted-pair/copper cable test (LRAT-1000 and LRAT-2000 models), fiber optic testing (LRAT-2000 only)
Cable Length, Wiremap, and Location
Cable Location
Locate cable runs with toning, switch port advertisement, switch port link light blinking, and remote cable identifiers. Toning supports both analog and digital IntelliTone modes.
Cable Wiremap and Length
Check patch cables using the built-in wiremap port, including pin-to-pin connection, or installed wiring for length, shorts, or opens or split pairs. Easily find opens, shorts, miswires, and split pairs three different ways:
On non-terminated cable
With a WireView Cable Identifier
With the built-in wiremap port on the side of the LinkRunner AT
Discover Nearest Switch and VLAN
The LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP), plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.
The LinkRunner AT displays critical nearest switch information includes:
Switch name and model
IP address
Chassis, slot, and port
VLAN IDs
Duplex and speed (actual and advertised)
Signal Strength
Connection (MDI or MDI/X)
PoE voltage and power (actual and test limit)
Graphical representation of power on pairs
1 Gig link on copper with PoE on port 30
1 Gig link on fiber on port 6
Packet Reflector
The LinkRunner AT packet reflector mode allows it to be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1Gbps. The reflector mode can be configured to swap MAC and/or IP addresses.
LinkRunner AT 2000 supports packet reflection for:
OptiView® XG Network Analysis Tablet
OneTouch™ AT Network Assistant
EtherScope™ Network Assistant
MetroScope™ Service Provider Assistant
Any device generating 802.3 frame or IP packet streams
Automated Test Results Management to Link-Live Cloud Service
Serving as a centralized test results and device management system, the complimentary Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud Service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.
An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.
This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:
Reduce results management overhead for multiple testers and users
Enables seamless collaboration between site personnel and remote experts
Simplify report generation across media types for network deployment documentation
Attach photos, user comments to each result, adding context for future changes and troubleshooting
For asset management, ability to associate serial numbers of installed devices, and/or cable/wall jack label to specific test
Local Reporting Mode
Alternatively, you can enable the Local Reporting Mode to facilitate saving of AutoTest results on the tester. For AutoTest results saved locally on the tester, the included MS windows-based LinkRunner AT Manager Software facilitates management and analysis of test results, test reports, and testers.
Technical Specification
General
Dimensions
3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Typical operating life is 6 hours; Typical charge time is 3 hours
Display
5.0 in color LCD with capacitive touch screen (480 x 800 pixels)
Keypad
1-key elastometric (power only)
External AC Adapter/Charger
AC input 90 to 264V AC 48 to 62 Hz input power DC output 15V DC at 1.2 Amps
Tone Generator
IntelliTone™ digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]
Media Access; Copper
RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at)
Media Access; Fiber
SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only)
Cable Tests
Pair lengths, opens, shorts, splits, crossed, straight through, and cable ID
Power over Ethernet (PoE)
Single ended testing: User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation The following PSE PoE parameters are measured: Pairs used Received class PSE type Unloaded voltage(V) Loaded voltage (V) (LRAT-2000 with TruePower™) Unloaded power (W) (LRAT-1000) Loaded power (W) (LRAT-2000 with TruePower™)
Supporting Operating Systems
Windows® 8.1 and Windows® 10 Minimum hardware requirement: Processor: 1 GHz or better CPU RAM: 1 GB or more Hard Disk: 1 MB available space Display: 1024 x 768 high color, 32-bit (recommended) Interface: USB
Environmental
Operating Temperature and Relative Humidity
32°F to 113°F (0°C to +45°C) Note: The battery will not charge if the internal temperature of the tester is above 113°F (45°C)
Operating Relative Humidity (% RH without condensation)
90% (50°F to 95°F; 10°C to 35°C) 75% (95°F to 113°F; 35°C to 45°C)
Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association
LinkRunner AT Manager Software
Supporting Operating Systems
Windows® 8.1 and Window®10
Processor
1 Ghz or better
RAM
1 GB or more
Hard Disk
1 GB available space
Display
1024 x 768 high color, 32-bit (recommended)
Interface
USB
Email product to a friend Print product details
View Keywording:
Due to the size, weight and delicate nature of Data and Server Cabinets, specialist couriers are required so they arrive on site in pristine condition.
We do our utmost to bare the delivery costs meaning we can deliver your cabinet free of charge to most areas, unfortunately there are some areas of the UK we are charged a lot more to deliver to and whilst we absorb as much of this cost as we viably can in certain cases we have to pass on some of these costs. Below is a list of these areas and the additional costs of delivery per cabinet.
This Tester Kit Contains:
The LinkRunner AT packet reflector mode allows it to be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1Gbps. The reflector mode can be configured to swap MAC and/or IP addresses.
