NetAlly AIRCHECK-G2-KIT AirCheck G2 Plus Antenna, Auto Charger and Holster
The AirCheck G2 Wireless Tester Kit has intuitive user interface provides actionable intelligence, simplifying wireless troubleshooting and validation.
AirCheck G2 provides network professionals and technicians of any skill level with complete and accurate information to resolve connectivity and performance problems quickly, speed up closure of trouble tickets, and ensure your Wi-Fi network meets end-users' needs.
This Tester Kit Contains:
- AirCheck G2 Tester
- Small Soft Carrying Case
- External Directional Antenna
- AC & Car Charger
- USB Cable
- Holster
- Quick Start Guide
Key Features
- AirCheck G2 offers a one-button AutoTest function that quickly provides a pass/fail indication of Wi-Fi network quality and identifies common problems.
- Test the latest Wi-Fi standards (including 802.11ax), with a rugged, handheld, purpose-built wireless tester.
- See all networks and devices in your location immediately upon power-up.
- View test results, including network availability, connectivity, utilization, throughput, security settings, possible rogues, and interferers.
- Automate reporting and enable collaboration with upload and management test results via Link-Live Cloud Service.
AutoTestAirCheck G2 performs the following five essential Wi-Fi tests and provides a pass/fail indication of the wireless environment, as well as identifies common problems — for any level of expertise:
802.11 Utilization - Reports channels in each band (2.4 GHz and 5 GHz) with the highest airtime utilization.
Non-802.11 Utilization - Reports channels with the highest non-802.11 airtime utilization, indicative of interference sources and high noise levels.
Co-Channel Interference - Reports channels with the most APs on the same channel that exceed the minimum signal level threshold.
Adjacent Channel Interference - Reports interference on a channel caused by APs that are operating on other channels that overlap with that channel.
Network Quality - Verifies coverage, interference, security, and ability to connect to specified networks, along with the availability of critical network services such as DHCP and connectivity to specified network targets.
Rogue Access Points - Reports APs other than your authorized devices. These devices may be compromising network security.
Access Point DiscoveryQuickly view all the APs present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and channel. Find common issues such as incorrect security type, poor signal coverage, or incorrect channel.
Sort or filter by any parameter, then drill into any AP to set its authorization level and see more details, including number of connected clients, supported rates,
802.11n/ac/ax capabilities and more. From the AP details page, drill into a list of connected clients, or the channel on which the AP operates to verify any channel utilization or co-channel interference problems.
From here you can also use a locator tool to find an AP, set Access Control status (ACL), or you can perform a packet capture.
Network DiscoveryQuickly view all the networks present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and number of access points. Find common issues such as mixed security types, poor signal coverage, or lack of secondary AP coverage.
Sort or filter by any parameter, then drill into greater detail on any network, including 802.11 types supported, number of connected clients, channels, and more. From the network details page, drill into a list of APs or clients on the network.
Network Connection TestsVerify network availability and access to critical services by connecting to a network (
SSID) or AP with a single touch on the Connect button. Key test steps include:
– Associate with AP
– Request and receive an IP address from a DHCP server
– Ping the default gateway and DNS servers for availability
– Perform a ping or TCP port test on up to ten network targets
– Conduct ongoing signal level, signal/noise ratio, and retry rate measurements
Once connected to a network, perform a roaming test to validate that roaming is enabled on the network, or run an iPerf performance test to verify throughput capabilities on the network.
Wired Ethernet TestsThe AirCheck G2’s built-in Ethernet test validates that APs have a working backhaul connection to the network.
– Diagnose and test Power over Ethernet (
PoE), link to the switch, DHCP, Gateway, and Internet connections.
– Get
VLAN, switch name, and port information via CDP/LLDP/EDP for your managed switches.
AirCheck G2 Specifications
General |
Dimensions |
3.8 in x 7.7 in x 1.6 in (9.7 cm x 19.6 cm x 4.1 cm) |
Weight |
18 oz (0.51 kg) |
Battery |
Rechargeable lithium-ion battery pack (3.6 V, 6 Ah, 21 Wh) |
Battery Life |
Typical operating life is 4.5 hours. Typical charge time is 7 hours. |
External AC adapter/charger |
AC input 85-264V AC 47-63 Hz input power DC output 15 V DC at 2 Amps |
Display |
5.0 in color LCD with capacitive touch screen (480 x 800 pixels) |
Keypad |
1-key elastometric (power only) |
Adjunct Interface |
2x USB 2.0 Type A port |
USB Port |
USB 2.0 Type A port |
Wireless antenna |
3x Internal |
External antenna port |
Receive only (no transmit). Reverse-polarity SMA connector. |
|
|
Environmental |
Operating Temperature |
32°F to 113°F (0°C to +45°C) NOTE: The battery will not charge if the internal temperature of the tester is above 122°F (50°C). |
Operating Relative Humidity (% RH without condensation) |
90% (50°F to 95°F; 10°C to 35°C) 75% (95°F to 113°F; 35°C to 45°C) |
Storage temperature |
-4°F to 140°F (-20°C to +60°C) |
Shock and Vibrations |
1 m drop test, Random, 3.8 grms, 5 Hz-500 Hz (Class 2) |
Safety |
IEC 61010-1:2010: Pollution degree 2 |
Altitude |
4,000 m; Storage: 12,000 m |
EMC |
IEC 61326-1:2013: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A |
|
|
Wireless |
Specification compliance |
IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.11ax Note: The tester provides 802.11ax visibility using an 802.11ac radio |
Wi-Fi Connectivity |
Frequencies of channels received:
NOTE: The tester receives on all of the frequencies in every country.2.4 GHz band: 2.412 – 2.484 GHz (channel 1 to channel 14)
5 GHz band: 5.170 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165)
Frequencies of channels transmitted:
NOTE: The tester transmits only on the frequencies allowed in the country where it is operating.
NOTE: These are the center frequencies of the channels that the AirCheck G2 tester supports.
2.4 GHz band: 802.11b: 2.412 – 2.484 GHz (channel 1 to channel 14) 802.11g/n 20 MHz BW (HT20): 2.412 – 2.472 GHz (channel 1 to channel 13) 802.11n 40 MHz BW (HT40): 2.422 – 2.462 GHz (includes all combinations of legal, bonded pairs of channels) 5 GHz band 802.11a/n 20 MHz BW (HT20): 5.180 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165) |
Operating frequencies |
802.11n 40 MHz BW (HT40/VHT40): 5.190 – 5.310 GHz, 5.510 – 5.670 GHz, 5.755 – 5.795 GHz (includes all combinations of legal, bonded pairs of channels)
802.11ac 80 MHz BW (VHT80): 5.210 – 5.290 GHz, 5.530 – 5.690 GHz, 5.775 GHz (includes all combinations of legal, bonded pairs of channels) |
|
|
Antennas |
Internal Wi-Fi antennas |
Three internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas. |
External directional antenna |
Antenna, frequency range 2.4 – 2.5 and 4.9 – 5.9 GHz. Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band. |
AirCheck G2 Manager Software |
Supported operating systems – Windows 8.1, Windows 10 |
Processor |
400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended) RAM 96 MB (minimum) |
RAM |
256 MB (minimum); 512 MB (recommended) |
Hard disk |
Up to 500 MB of available space may be required |
Display |
1280 x 1024 high color, 32-bit (recommended) |
Hardware |
USB Port |
Conforms to relevant European Union directives Conforms to relevant Australian Safety and EMC standards. Certified by CSA Group to North American safety standards. Complies with 47 CFR Part 15 requirements of the U.S. Federal Communications Commission. Certified by the National Agency of Telecommunications (Anatel). Conforms to relevant South Korean EMC Standards. |
Additional South Korean EMC Standards Information Electromagnetic Compatibility. Applies to use in Korea only. Class A Equipment (Industrial Broadcasting & Communications Equipment) [1]
[1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes. |
The AirCheck G2 Wireless Tester Kit has intuitive user interface provides actionable intelligence, simplifying wireless troubleshooting and validation.
AirCheck G2 provides network professionals and technicians of any skill level with complete and accurate information to resolve connectivity and performance problems quickly, speed up closure of trouble tickets, and ensure your Wi-Fi network meets end-users' needs.
This Tester Kit Contains:
- AirCheck G2 Tester
- Small Soft Carrying Case
- External Directional Antenna
- AC & Car Charger
- USB Cable
- Holster
- Quick Start Guide
Key Features
- AirCheck G2 offers a one-button AutoTest function that quickly provides a pass/fail indication of Wi-Fi network quality and identifies common problems.
- Test the latest Wi-Fi standards (including 802.11ax), with a rugged, handheld, purpose-built wireless tester.
- See all networks and devices in your location immediately upon power-up.
- View test results, including network availability, connectivity, utilization, throughput, security settings, possible rogues, and interferers.
- Automate reporting and enable collaboration with upload and management test results via Link-Live Cloud Service.
AutoTestAirCheck G2 performs the following five essential Wi-Fi tests and provides a pass/fail indication of the wireless environment, as well as identifies common problems — for any level of expertise:
802.11 Utilization - Reports channels in each band (2.4 GHz and 5 GHz) with the highest airtime utilization.
Non-802.11 Utilization - Reports channels with the highest non-802.11 airtime utilization, indicative of interference sources and high noise levels.
Co-Channel Interference - Reports channels with the most APs on the same channel that exceed the minimum signal level threshold.
Adjacent Channel Interference - Reports interference on a channel caused by APs that are operating on other channels that overlap with that channel.
Network Quality - Verifies coverage, interference, security, and ability to connect to specified networks, along with the availability of critical network services such as DHCP and connectivity to specified network targets.
Rogue Access Points - Reports APs other than your authorized devices. These devices may be compromising network security.
Access Point DiscoveryQuickly view all the APs present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and channel. Find common issues such as incorrect security type, poor signal coverage, or incorrect channel.
Sort or filter by any parameter, then drill into any AP to set its authorization level and see more details, including number of connected clients, supported rates, 802.11n/ac/ax capabilities and more. From the AP details page, drill into a list of connected clients, or the channel on which the AP operates to verify any channel utilization or co-channel interference problems.
From here you can also use a locator tool to find an AP, set Access Control status (ACL), or you can perform a packet capture.
Network DiscoveryQuickly view all the networks present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and number of access points. Find common issues such as mixed security types, poor signal coverage, or lack of secondary AP coverage.
Sort or filter by any parameter, then drill into greater detail on any network, including 802.11 types supported, number of connected clients, channels, and more. From the network details page, drill into a list of APs or clients on the network.
Network Connection TestsVerify network availability and access to critical services by connecting to a network (SSID) or AP with a single touch on the Connect button. Key test steps include:
– Associate with AP
– Request and receive an IP address from a DHCP server
– Ping the default gateway and DNS servers for availability
– Perform a ping or TCP port test on up to ten network targets
– Conduct ongoing signal level, signal/noise ratio, and retry rate measurements
Once connected to a network, perform a roaming test to validate that roaming is enabled on the network, or run an iPerf performance test to verify throughput capabilities on the network.
Wired Ethernet TestsThe AirCheck G2’s built-in Ethernet test validates that APs have a working backhaul connection to the network.
– Diagnose and test Power over Ethernet (PoE), link to the switch, DHCP, Gateway, and Internet connections.
– Get VLAN, switch name, and port information via CDP/LLDP/EDP for your managed switches.
AirCheck G2 Specifications
General |
Dimensions |
3.8 in x 7.7 in x 1.6 in (9.7 cm x 19.6 cm x 4.1 cm) |
Weight |
18 oz (0.51 kg) |
Battery |
Rechargeable lithium-ion battery pack (3.6 V, 6 Ah, 21 Wh) |
Battery Life |
Typical operating life is 4.5 hours. Typical charge time is 7 hours. |
External AC adapter/charger |
AC input 85-264V AC 47-63 Hz input power DC output 15 V DC at 2 Amps |
Display |
5.0 in color LCD with capacitive touch screen (480 x 800 pixels) |
Keypad |
1-key elastometric (power only) |
Adjunct Interface |
2x USB 2.0 Type A port |
USB Port |
USB 2.0 Type A port |
Wireless antenna |
3x Internal |
External antenna port |
Receive only (no transmit). Reverse-polarity SMA connector. |
|
|
Environmental |
Operating Temperature |
32°F to 113°F (0°C to +45°C) NOTE: The battery will not charge if the internal temperature of the tester is above 122°F (50°C). |
Operating Relative Humidity (% RH without condensation) |
90% (50°F to 95°F; 10°C to 35°C) 75% (95°F to 113°F; 35°C to 45°C) |
Storage temperature |
-4°F to 140°F (-20°C to +60°C) |
Shock and Vibrations |
1 m drop test, Random, 3.8 grms, 5 Hz-500 Hz (Class 2) |
Safety |
IEC 61010-1:2010: Pollution degree 2 |
Altitude |
4,000 m; Storage: 12,000 m |
EMC |
IEC 61326-1:2013: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A |
|
|
Wireless |
Specification compliance |
IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.11ax Note: The tester provides 802.11ax visibility using an 802.11ac radio |
Wi-Fi Connectivity |
Frequencies of channels received:
NOTE: The tester receives on all of the frequencies in every country.2.4 GHz band: 2.412 – 2.484 GHz (channel 1 to channel 14)
5 GHz band: 5.170 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165)
Frequencies of channels transmitted:
NOTE: The tester transmits only on the frequencies allowed in the country where it is operating.
NOTE: These are the center frequencies of the channels that the AirCheck G2 tester supports.
2.4 GHz band: 802.11b: 2.412 – 2.484 GHz (channel 1 to channel 14) 802.11g/n 20 MHz BW (HT20): 2.412 – 2.472 GHz (channel 1 to channel 13) 802.11n 40 MHz BW (HT40): 2.422 – 2.462 GHz (includes all combinations of legal, bonded pairs of channels) 5 GHz band 802.11a/n 20 MHz BW (HT20): 5.180 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165) |
Operating frequencies |
802.11n 40 MHz BW (HT40/VHT40): 5.190 – 5.310 GHz, 5.510 – 5.670 GHz, 5.755 – 5.795 GHz (includes all combinations of legal, bonded pairs of channels)
802.11ac 80 MHz BW (VHT80): 5.210 – 5.290 GHz, 5.530 – 5.690 GHz, 5.775 GHz (includes all combinations of legal, bonded pairs of channels) |
|
|
Antennas |
Internal Wi-Fi antennas |
Three internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas. |
External directional antenna |
Antenna, frequency range 2.4 – 2.5 and 4.9 – 5.9 GHz. Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band. |
AirCheck G2 Manager Software |
Supported operating systems – Windows 8.1, Windows 10 |
Processor |
400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended) RAM 96 MB (minimum) |
RAM |
256 MB (minimum); 512 MB (recommended) |
Hard disk |
Up to 500 MB of available space may be required |
Display |
1280 x 1024 high color, 32-bit (recommended) |
Hardware |
USB Port |
Conforms to relevant European Union directives Conforms to relevant Australian Safety and EMC standards. Certified by CSA Group to North American safety standards. Complies with 47 CFR Part 15 requirements of the U.S. Federal Communications Commission. Certified by the National Agency of Telecommunications (Anatel). Conforms to relevant South Korean EMC Standards. |
Additional South Korean EMC Standards Information Electromagnetic Compatibility. Applies to use in Korea only. Class A Equipment (Industrial Broadcasting & Communications Equipment) [1]
[1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes. |