Netgear MS510TX 8-Port Multi-Gigabit Ethernet Smart Managed Switch

8-Port Multi-Gigabit Ethernet Smart Switch with 2 Dedicated 10-Gigabit Uplink Ports (1 Copper/1 SFP+)

Multi-Gigabit Ethernet Smart Switches (MS510TX)

Businesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers, workstations, storage devices, and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy Cat5E / Cat6 cables.

Key Features

• MS510TXPP: 180W PoE budget available across 8 Gigabit and MultiGigabit PoE+ ports (802.3at)

• Multi-Gigabit, multi-speed ports to connect any type of device to a single switch

• Quiet desktop operation or rack mounting with 21dB (MS510TX) or 28.8dB max (MS510TXPP) at 25°C (77°F) ambient

• Layer 3 static routing with 32 routes (IPv4 and IPv6) for interVLAN local routing

• Non-blocking 78Gbps fabric for 2x5G bps+2x2.5Gbps+4x1Gbps+2x10Gbps full duplex switching and routing

• Advanced VLAN support for better network segmentation

• L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication

• MS510TXPP: Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling (e.g. Wireless APs, IP security cameras, LED lighting, secure access door locks, IoT devices…)

• Advanced QoS (Quality of Service) for traffic prioritization including portbased, 802.1p and L2/L3/L4 DSCPbased

• Auto “denial-of-service” (DoS) prevention

• IGMP Snooping and Querier for multicast optimization

• Rate limiting and priority queuing for better bandwidth allocation

• Port mirroring for network monitoring

• Energy Efficient Ethernet (IEEE 802.3az) or maximum power savings

• Cable test to troubleshoot connection issues

• Easy-to-use Web browser-based management GUI

• SNMP v1, v2c, v3 and RMON remote monitoring

Businesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers, workstations, storage devices, and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy CAT5e / CAT6 cables.

That is why NETGEAR launched its new Multi-Gigabit Smart Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the MS510TX and MS510TXPP give the exact speed required, with no downgrade. Also, the new NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle. Access, Aggregation or Collapsed Core: You can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.

Whisper Quiet

A maximum of 27.3dB (GS716TP) even at full power and 25 C (77 F) ambient.

Room to Move

5 different ports available: 1G, 2.5G, 5G, 10G; SFP+ and Copper.

Secure Your Data

Defend with Access Control, DiffServ QoS policies, LACP Link Aggregation, Private VLANs, Denial of service protection.