| Product Code: | |
| Options: | |
| Qty: | |
| Unit Price: | £ |
| Part No: | FLLRAT-1000 |
| Manufacturer No: | LRAT-1000 |
| Delivery: | End of Life Product |
 |
Two Models: LRAT-2000 and LRAT-1000
LinkRunner AT is available in two models: LRAT-2000 and LRAT-1000. LinkRunner AT 2000 adds the following exclusive* features:
*These exclusive features cannot be added to the LinkRunner AT 1000.
Key features include verifying signal and link integrity at 10/100/1G over copper,802.1x authentication, cable wiremapping, IPv4 readiness , streamlined UI and color display, full documentation of test results with storage for 10 reports, location and identification of cabling runs, and nearest switch information.
What LinkRunner AT customers are saying:
“I was amazed .. this device was finished testing before I could even explain to one of my junior engineers what I was actually doing. I’ve been an engineer for more than 20 years and this device just gets me, it understands what my workflow truly is and what type of information I need to do my job.” Charles Morris, senior consultant at ACS, A Xerox Company
“After using the LinkRunner AT I can unquestionably say it will save this organization time and money while improving satisfaction. In fact, now that I’ve used it, I wouldn’t want to be without one.” – Thomas Franchina Senior Systems Programmer, United Health Services
“Not only is the LinkRunner AT fast, but it’s incredibly thorough with the essential Ethernet connectivity tests I need. So while it speeds troubleshooting, it also gives me a high level of confidence in the results. If the unit says the connection is okay, I know it’s okay.” – John Heidelberg Network Administrator, Jensen International
Get Answers Fast
With a three second startup and a user-defined AutoTest that performs your required set of connectivity tests in seconds, the LinkRunner AT enables you to quickly and accurately identify and solve network problems.
AutoTest runs 6 connectivity tests in seconds
Connect using copper, turn it on, and the LinkRunner AT shows the link status, connection type, and signal strength.
Then the LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.
The LinkRunner AT displays critical nearest switch information including:
Key Device and Application Availability
In addition to a ping, which is often blocked, the LinkRunner AT performs a TCP port open test to verify application connectivity through IPv4. Router, DNS and DHCP servers are reported, along with response time. Configure 10 additional devices to meet your requirements by URL or IPv4 address and optional application port number.
Ping & TCP Port Connectivity
802.1x AuthenticationVerify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner Manager Software can be used to configure 802.1x EAP type, download certificates, and enter passwords.
802.1x failure
MAC ACLs can be validated using MAC spoofing.
Cable Testing and VerificationCable Tests
Locate cable runs with toning, port advertisement, link blinking, and wire-mapping with up to 6 cable identifiers. Toning supports both analog and digital IntelliTone modes.
Cable Verification
Check patch cables using the built in wiremap port including pin-to-pin connection, or installed wiring for length, shorts, or opens or split pairs. The optional office locator kit allows identification of up to 6 unique ports for documenting cable plants.
Easily find opens, shorts, miswires, and split pairs three different ways:
Good Cable
A mis-wired cable with pairs 1,2 and 7,8 swapped using cable identifier #1
A cable with an open on 4 using the built in wiremap port
A mis-wired cable with pairs 3,6 & 4,5 split
LinkRunner Manager Software is included with the LinkRunner AT and lets you generate reports, manage LinkRunner AT profiles, and upgrade the LinkRunner AT firmware.
Document Results
Save complete results of the current troubleshooting session for downloading to your PC with a push of a button. Then create reports with the LinkRunner Manager to quickly close a trouble ticket or provide documentation for problem escalation. Press one key to record all collected details for:
Transfer sessions to a PC and easily view/store them using LinkRunner Manager software.
Profiles
Easily configure, manage, and control the use of your LinkRunner AT – or an entire fleet of them – with the Profiles feature, which includes the following settings:
Name and transfer up to 10 profiles into the LinkRunner AT. You can also transfer profiles from the LinkRunner AT to LinkRunner Manager software.
Profiles allow you to standardize your critical tests into one or more profiles making it easy for staff to produce consistent test results. For example, use a profile to verify the connectivity to key devices.
Record Sessions
Save complete results of the current troubleshooting session for downloading to your PC with a push of a button. Then create reports with LinkRunner Manager to quickly close a trouble ticket or provide documentation for problem escalation. Press one key to record all collected details for:
Transfer sessions to a PC and easily view/store them using LinkRunner Manager software.
Easy Upgrades
The mini-USB port allows software upgrades in the field in just minutes. And with Gold support, you’ll automatically receive upgrades at no additional charge.
Multiple Language Support
The LinkRunner AT fully supports multiple languages including English, French, German, Spanish, Portuguese, Russian, Japanese, and Simplified Chinese. Multi-language support included the LinkRunner AT user interface, getting started guide, user manual and supporting LinkRunner Manager software, help files and user reports.
LinkRunner Family Comparison Chart
See the entire family of LinkRunner testers.
Two Models: LRAT-2000 and LRAT-1000
LinkRunner AT is available in two models: LRAT-2000 and LRAT-1000. LinkRunner AT 2000 adds the following exclusive* features:
*These exclusive features cannot be added to the LinkRunner AT 1000.
Key features include verifying signal and link integrity at 10/100/1G over copper,802.1x authentication, cable wiremapping, IPv4 readiness , streamlined UI and color display, full documentation of test results with storage for 10 reports, location and identification of cabling runs, and nearest switch information.
What LinkRunner AT customers are saying:
“I was amazed .. this device was finished testing before I could even explain to one of my junior engineers what I was actually doing. I’ve been an engineer for more than 20 years and this device just gets me, it understands what my workflow truly is and what type of information I need to do my job.” Charles Morris, senior consultant at ACS, A Xerox Company
“After using the LinkRunner AT I can unquestionably say it will save this organization time and money while improving satisfaction. In fact, now that I’ve used it, I wouldn’t want to be without one.” – Thomas Franchina Senior Systems Programmer, United Health Services
“Not only is the LinkRunner AT fast, but it’s incredibly thorough with the essential Ethernet connectivity tests I need. So while it speeds troubleshooting, it also gives me a high level of confidence in the results. If the unit says the connection is okay, I know it’s okay.” – John Heidelberg Network Administrator, Jensen International
Get Answers Fast
With a three second startup and a user-defined AutoTest that performs your required set of connectivity tests in seconds, the LinkRunner AT enables you to quickly and accurately identify and solve network problems.
AutoTest runs 6 connectivity tests in seconds
Connect using copper, turn it on, and the LinkRunner AT shows the link status, connection type, and signal strength.
Then the LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.
The LinkRunner AT displays critical nearest switch information including:
Key Device and Application Availability
In addition to a ping, which is often blocked, the LinkRunner AT performs a TCP port open test to verify application connectivity through IPv4. Router, DNS and DHCP servers are reported, along with response time. Configure 10 additional devices to meet your requirements by URL or IPv4 address and optional application port number.
Ping & TCP Port Connectivity
802.1x AuthenticationVerify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner Manager Software can be used to configure 802.1x EAP type, download certificates, and enter passwords.
802.1x failure
MAC ACLs can be validated using MAC spoofing.
Cable Testing and VerificationCable Tests
Locate cable runs with toning, port advertisement, link blinking, and wire-mapping with up to 6 cable identifiers. Toning supports both analog and digital IntelliTone modes.
Cable Verification
Check patch cables using the built in wiremap port including pin-to-pin connection, or installed wiring for length, shorts, or opens or split pairs. The optional office locator kit allows identification of up to 6 unique ports for documenting cable plants.
Easily find opens, shorts, miswires, and split pairs three different ways:
Good Cable
A mis-wired cable with pairs 1,2 and 7,8 swapped using cable identifier #1
A cable with an open on 4 using the built in wiremap port
A mis-wired cable with pairs 3,6 & 4,5 split
LinkRunner Manager Software is included with the LinkRunner AT and lets you generate reports, manage LinkRunner AT profiles, and upgrade the LinkRunner AT firmware.
Document Results
Save complete results of the current troubleshooting session for downloading to your PC with a push of a button. Then create reports with the LinkRunner Manager to quickly close a trouble ticket or provide documentation for problem escalation. Press one key to record all collected details for:
Transfer sessions to a PC and easily view/store them using LinkRunner Manager software.
Profiles
Easily configure, manage, and control the use of your LinkRunner AT – or an entire fleet of them – with the Profiles feature, which includes the following settings:
Name and transfer up to 10 profiles into the LinkRunner AT. You can also transfer profiles from the LinkRunner AT to LinkRunner Manager software.
Profiles allow you to standardize your critical tests into one or more profiles making it easy for staff to produce consistent test results. For example, use a profile to verify the connectivity to key devices.
Record Sessions
Save complete results of the current troubleshooting session for downloading to your PC with a push of a button. Then create reports with LinkRunner Manager to quickly close a trouble ticket or provide documentation for problem escalation. Press one key to record all collected details for:
Transfer sessions to a PC and easily view/store them using LinkRunner Manager software.
Easy Upgrades
The mini-USB port allows software upgrades in the field in just minutes. And with Gold support, you’ll automatically receive upgrades at no additional charge.
Multiple Language Support
The LinkRunner AT fully supports multiple languages including English, French, German, Spanish, Portuguese, Russian, Japanese, and Simplified Chinese. Multi-language support included the LinkRunner AT user interface, getting started guide, user manual and supporting LinkRunner Manager software, help files and user reports.
LinkRunner Family Comparison Chart
See the entire family of LinkRunner testers.
