Austin Hughes IP Dongle with SNMP for all W Series PDUs

For IP PDU access, simply connect 1 x IP Dongle for all daisy chain PDUs to save IP network address. Each IP Dongle allows access to 16 PDU Levels. Patented IP Dongle provides IP remote access to the PDUs by a true network IP address chain.

Only 1 x IP dongle allows access to max. 16 PDUs in daisy chain - which is a highly efficient application for saving not only the IP remote accessories cost, but also the true IP addresses required on the PDU management.

Hot-Pluggable design facilitates the IP dongle installation. Simply integrate the IP Dongle to the 1st PDU, then the entire daisy chain group can be remote over IP. Hence, administrator can remotely access all PDUs in the daisy chain group by one single IP via the IP Dongle



Vertical IP dongle installation steps:

1. Slide the IP dongle on the plate above the meter
2. Plug the RJ-45 connector of IP dongle into the LINK port of the 1st level PDU meter
3. Use the CAT. 5 / 6 cable to connect IP dongle to network device