ServerLift

ServerLIFT SL350X - Manual server lifter solution for data centres

The manual server lifter solution SL350X is ready for use within minutes. It is capable of moving up to 160 kilograms of IT equipment to any location within the Data Centre. There, the load can be lifted to a maximum height of 2.4 metres. A single operator is able to navigate the heavy load easily through doorways, narrow Data Centre aisles and can rotate on it on its axis to any degree and into the smallest of spaces. The ServerLIFT SL350x side loading capabilities allows the operator to work from either the left or right hand side of the unit. This provides the ideal alignment and shelf position for the integration and installation of heavy IT equipment into the cabinet: After the IT components are vertically lifted to the required height the servers can be horizontally inserted via the extendable platform of the ServerLift into the free RU space of the rack. So the final rack mounting and cabling requires fewer personnel and eliminates potential injury. Improve Efficiency with the SL-350X ServerLIFT

ServerLIFT SL350X Highlights:

Platform lowers to the bottom of standard racks
ServerLIFT telescopes allowing the platform to rise up to 8 feet
160kg weight capacity
Side loading for easy equipment alignment while facing the rack
Heavy duty manual winch
4 Large Swiveling Castors – Front
Wheels lock for precise steering or swivel for maneuverability
Easy Steer Handles
Included strap kit secures equipment
Stabilizer/brake system for safe equipment install




Manual Heavy Duty Hand Crank

Effortlessly lifts 350lbs
Fully contained cable and winch mechanism
Precise height adjustment


Sturdy Platform

High quality steel frame
Maintains even alignment up to 350 lb.


Includes strap kit to secure IT Hardware




Built-In Easy Glide Shelf

Adds 6″ lateral movement to the left and right


Lift and slide into standard 19″ racks


Seamless install from platform into rails


Base Specifications

  Imperial Metric Height (Lowered) 5′ 8″ 1.73 m Height (Raised)  9′ 2.75″ 2.81 m Length 3′ 8″ 1.12 m Width 2′ 5″  0.625 m Platform Height-Extended 8′ 2.44 m Platform Height-Stowed 5.3″ 13.5 cm Load Capacity-Center 350 lbs 158.7 kg Load Capacity-Edge 300 lbs 136.08 kg Platform-Movement/Side 6″ 15.25 cm Movable Platform-Width 14 3/4″ 37.6 cm Platform Length 24 in  61 cm Total Platform Width 21″ 53 cm Rear Caster Diameter   5″ 12.7 cm Front Caster Diameter 3″ 10.2 cm Caster Width 2″ 5.08 cm Total Unit Weight 350 lbs 176.9 kg

ServerLIFT SL-500X - Automatic server lifter for heavy IT components in the data centre

In the past, rack mounting and moving heavy and bulky IT components around the Data Centre was difficult. This back breaking work was performed by the Data Centre technical or facility personnel with only some relief provided by using a trolley or cart to move the equipment to the cabinets. At least two people were needed to lift the heavy IT equipment up to the desired RU space in the cabinet. This procedure presents a high risk of injury for the Data Centre staff as well as a potential danger of damaging sensitive and valuable IT equipment. These difficulties are compounded by the fact that today’s Data Centres are growing dynamically and therefore IT hardware has to be changed, supplemented, relocated and reconfigured ever more frequently. Trolley carts and the muscle power of the IT staff naturally reach their physical limits, so the only way to correspond to the increasing demands is to use a capable transportation and server lifting solution.

Increase Safety with the SL-500X ServerLIFT

The heavy duty ServerLIFT SL500X is ready for use within minutes. It is capable of moving 227 kilograms of IT equipment to any location within the Data Centre. There, the load can be lifted automatically to a maximum height of 2.4 metres. The whole lifting procedure takes only 30 seconds. A single operator is able to navigate the heavy load easily through doorways, narrow Data Centre aisles and can rotate on it on its axis to any degree and into the smallest of spaces.

For added convenience, the ServerLIFT SL500X is equipped with a built-in battery charger and charge indicator. Both guarantee that the lifting solution is provided with the optimal power for its heaviest work at any time. To make sure that this can be done with the required safety and stableness, the wheels of the ServerLIFTer chassis are secured for each lifting process with the integrated stabiliser brake system.

ServerLIFT SL500X Highlights:

Platform lowers to the bottom of standard racks
ServerLIFT telescopes allowing the platform to rise up to 8 Feet in 30 seconds
Front Wheels lock for precise steering or swivel for maneuverability
4 Large Swiveling Castors
227 kg weight capacity
Side loading for easy equipment alignment while facing the rack
Ideal for cold aisle containment rooms
Stabilizer/brake system for safe equipment install
Easy Steer Handles
Leak-proof AGM battery (approx. 8 hours of continuous use)
Non-Hydraulic heavy duty winch motor




Touch-Stop Sensor©

Exclusive sensing technology stops on contact with ceiling and other overhead obstructions
Prevents structural, and equipment damage
Enables safer use in contained and open environments without adjustment


Heavy Duty Platform

Maintains even alignment up to 500 lb.
Fits through standard size doorways


Includes strap kit to secure IT Hardware




Built-In Easy Glide Shelf

Adds 6″ lateral movement to the left and right


Lift and slide into standard 19″ racks


Seamless install from platform into rails




Fully Powered Lifting

Battery powered lifting with the touch of a button
Precise height adjustment


Proprietary micro-processor controlled lifting system


Dual side controls allow a single operator to align equipment


Base Specifications

  US Metric Height (Lowered) 5′ 10″  1.76 m Height (Raised) 9′ 4″ 2.85 m Length 3′ 8″ 1.12 m Width 2′ 5″ 0.625 m Platform Height-Extended 8′ 2.44 m Platform Height-Stowed 5.3″ 13.5 cm Load Capacity-Platform Centre 500 lbs 226.8 kg Load Capacity-Edge 300 lbs 136.08 kg Platform Movement / side 6″ 15.24 cm Movable Platform-Width 14 3/4″ 37.6 cm Platform Length  24″ 61 cm Total Platform Width 21″ 53 cm Rear Caster Diameter  5″ 12.7 cm Front Caster Diameter  3″ 10.2 cm Caster Width 2″ 5.08 cm Total Unit Weight 428 lbs 194 kg

The ServerLIFT LE-500X Lift Extension was created to help solve the issue of lifting heavy IT equipment out of boxes and off of skids. It features a lightweight design, that is capable of lifting up to 500 lbs. of equipment with ease. It is compatible with the ServerLIFT SL-500X and SL-350X. 

VIDEO- http://vimeo.com/33925965



Supports the max weight capacity of the SL-500x and SL-350X
Simple install and removal
Heavy duty construction
Easily removes equipment from cartons and skids with sling and hook accessory

The ServerLIFT RL-500 features a lightweight yet rugged design, and is compatible with the SL-500X, the SL-350X and the original ServerLIFT SL500 units. The Platform RISER enables a user to install servers at the top of any rack in areas where positing equipment is challenging such as:

Low ceilings clearance or obstructions
Cold and hot aisle containment rooms
Ideal for drop in rails
Highlights - 

Easily mounts onto all ServerLIFT models.
Supports full functionality of all ServerLIFT units
Fits into standard 19” racks
Requires no tools or assembly
Extended height reaching up to 9 ½  feet

Install in Cold Aisle Containment with the RL-500

VIDEO - http://vimeo.com/serverlift/rl500-platform-riser

 

Overall Specifications

  US Metric Height 24″ in 61 cm Length 15 in 38.1 cm Width 16 in 40.6 cm Weight 18 lbs 8 kg Load Capacity 500 lbs 350 kg