Medical Grade UPS and Accessories

This Oxygen Bottle Holder is for use on the 900PT241 Mobile Pole Stand
Used for Oxygen and/or Air cannisters
To only be mounted on the lower bracket of the 900PT421 Mobile Pole Stand

Product Diagram


Related Products and Accessories

These products and accessories are recommended purchases when setting up AIRVO 2 units for transporting patients.
Tripp Lite SMX700HGL Medical-Grade UPS

UPS Mounting Kit

A Line-interactive UPS that provides basic battery backup with UL 60601-1 compliance for use in medical facilities, including patient care areas. This kit is designed to secure a UPS to a Mobile Pole Stand, enabling continued operation during power surges & failures.

The 900PT411 UPS Mounting Kit is a Fisher & Paykel Healthcare product designed to secure an Uninterruptible Power Supply (UPS) onto the Fisher & Paykel Healthcare 900PT421 Mobile Pole Stand, for use with Fisher & Paykel Healthcare AIRVO 2 Humidifier.

In the case that a UPS is used with the AIRVO 2, it will be used expressly at the user's own risk. The user should ensure that the UPS be tested with the AIRVO 2 before clinical use to prove suitability for purpose, including, but not limited to, being capable of delivering the "Supply voltage/current" values listed in Section 5 of the AIRVO 2 User Manual, for the desired period of use.

Please Note: This item includes the splash cover, strap, tray, power cord and socket cover. The product image displays the mounting kit in use on a pole stand with a UPS installed which are not included.


Kit Contents


Related Products and Accessories

These products and accessories are recommended purchases when setting up AIRVO 2 units for transporting patients.
Tripp Lite SMX700HGL Medical-Grade UPS

Oxygen Cylinder Holder

A Line-interactive UPS that provides basic battery backup with UL 60601-1 compliance for use in medical facilities, including patient care areas. This Oxygen Bottle Holder is for use on the Mobile Pole Stand to hold Oxygen and/or Air canisters.

Overview The IS300HGDV Isolator® Series Dual-Voltage 115/230V 300W 50/60Hz Medical-Grade™ Transformer with full CAN/ES/IEC/EN 60601-1 listing is ideal for protecting sensitive electronic equipment in patient-care vicinities. It can be configured for either step-up voltage, step-down voltage or pass-through voltage operation. Along with line isolation and continuous EMI/RFI line noise filtering, its surge protection rating of 240 joules suppresses excess voltage to prevent it from damaging connected equipment.

An internal low-impedance isolation transformer component offers 100% isolation from the input mains AC line. Faraday shield reduces the cumulative leakage current of the IS300HGDV and connected equipment to levels less than 50 microamps, while removing utility switching transients and harmonics generated by other on-site loads and reducing the impact of utility-related surge conditions.

IEEE 587 Category A and B ring wave and combination wave test surges to only 0.5V common mode.

Components connect to four C13 outlets with fuse overload protection and a lighted on/off switch. >The rugged all-metal unit housing ships ready for placement in any industrial, medical, office, network or audio/video environment. Requires a C13 AC input cord with country specific plug (sold separately).

Transformer filtering provides continuous common-mode noise rejection with no wearable parts. The IS300HGDV reduces 6000V

Product Features Protects sensitive equipment from EMI/RFI line noise and surges

Cumulative leakage current less than 50 µA

Automatically shuts down all outlets in case of overload

Offers complete isolation from input AC mains power

Ideal for use in any industrial, network or medical environment

2-year limited warranty

Tripp Lite's SMX700HG offers medical-grade UPS protection with built-in line interactive voltage regulation, intelligent monitoring and unattended shutdown capability.

Tested to CE/IEC 60601-1 as medical electrical equipment. Built-in isolation transformer with Faraday shield removes common mode noise while maintaining full AC surge suppression in all modes. Resistant to electrostatic discharge. Includes high quality hospital-grade plug and outlets. 700VA power handling capacity supports computers, inter-networking equipment and other critical loads during commercial power failures.

Line interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274 back to normal 230V levels, saving battery reserves for use only during complete power failures. Includes 6 outlets, diagnostic LEDs and built-in USB & RS-232 communications ports that work with downloadable PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.

Key Features Provides Ideal UPS Backup in Healthcare Facilities
Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise
Battery Backup and Full Surge Protection
36 minutes runtime for half load (225W); 14.5 minutes for full load (450W)
All six hospital-grade outlets provide surge protection rated to 340 joules
EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference
Resistant to electrostatic discharge
LEDs and Audible Alarms Keep You Aware of Power Status
Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning
Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed
Saves Your Files, Even When You’re Away
Works with Tripp Lite PowerAlert software (available as a free download) to enable safe, unattended system shutdown and files saves during prolonged power failures
Connects to your computer via either the DB9 port or USB port
This Package Includes SMX700HG 700VA/450W Medical-Grade Tower UPS System
USB monitoring cable, 1.8 m (6 ft.)
DB9 serial monitoring cable, 1.8 m (6 ft.)
Owner’s Manual

Estimated Runtime View the estimated runtime information.

ripp Lite’s SMX1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 27.5 minutes of runtime for a half load, or 11 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout.

Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX1200XLHG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15 cm (6 in.) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules.

The SMX1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Key Features Provides Ideal UPS Backup in Healthcare Facilities
Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise
Battery Backup and Full Surge Protection
27.5 minutes runtime for half load (375W); 11 minutes for full load (750W)
All six hospital-grade outlets provide surge protection rated to 340 joules
EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference
Resistant to electrostatic discharge
LEDs and Audible Alarms Keep You Aware of Power Status
Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning
Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed
Saves Your Files, Even When You’re Away
Works with Tripp Lite PowerAlert software (included) to enable safe, unattended system shutdown and files saves during prolonged power failures
Connects to your computer via either the DB9 port or USB port
This Package Includes SMX700HG 700VA/450W Medical-Grade Tower UPS System
USB monitoring cable, 1.8 m (6 ft.)
DB9 serial monitoring cable, 1.8 m (6 ft.)
Estimated Runtime View the estimated runtime information.

Overview The IS600HGDV Isolator® Series Dual-Voltage 115/230V 600W 50/60Hz Medical-Grade™ Transformer with full CAN/ES/IEC/EN 60601-1 listing is ideal for protecting sensitive electronic equipment in patient-care vicinities.
It can be configured for either step-up voltage, step-down voltage or pass-through voltage operation.
Along with line isolation and continuous EMI/RFI line noise filtering, its surge protection rating of 240 joules suppresses excess voltage to prevent it from damaging connected equipment.

An internal low-impedance isolation transformer component offers 100% isolation from the input mains AC line.
Faraday shield reduces the cumulative leakage current of the IS600HGDV and connected equipment to levels less than 50 microamps, while removing utility switching transients and harmonics generated by other on-site loads and reducing the impact of utility-related surge conditions.

IEEE 587 Category A and B ring wave and combination wave test surges to only 0.5V common mode.

Transformer filtering provides continuous common-mode noise rejection with no wearable parts. The IS600HGDV reduces 6000V

Components connect to six C13 outlets with fuse overload protection and a lighted on/off switch.
The rugged all-metal unit housing ships ready for placement in any industrial, medical, office, network or audio/video environment. Requires a C13 AC input cord with country specific plug (sold separately).

Product Features Protects sensitive equipment from EMI/RFI line noise and surges

Cumulative leakage current less than 50 µA

Automatically shuts down all outlets in case of overload

Offers complete isolation from input AC mains power

Ideal for use in any industrial, network or medical environment

2-year limited warranty

Overview The IS1000HGDV Isolator® Series Dual-Voltage 115/230V 1000W 50/60Hz Medical-Grade Transformer with full CAN/ES/IEC/EN 60601-1 listing is ideal for protecting sensitive electronic equipment in patient-care vicinities.
It can be configured for either step-up voltage, step-down voltage or pass-through voltage operation.
Along with line isolation and continuous EMI/RFI line noise filtering, its surge protection rating of 240 joules suppresses excess voltage to prevent it from damaging connected equipment.

An internal low-impedance isolation transformer component offers 100% isolation from the input mains AC line.
Faraday shield reduces the cumulative leakage current of the IS1000HGDV and connected equipment to levels less than 80 microamps, while removing utility switching transients and harmonics generated by other on-site loads and reducing the impact of utility-related surge conditions.

IEEE 587 Category A and B ring wave and combination wave test surges to only 0.5V common mode.

Transformer filtering provides continuous common-mode noise rejection with no wearable parts. The IS1000HGDV reduces 6000V

Components connect to eight C13 outlets with fuse overload protection and a lighted on/off switch.
The rugged all-metal unit housing ships ready for placement in any industrial, medical, office, network or audio/video environment. Requires a C13 AC input cord with country specific plug (sold separately)

Product Features Protects sensitive equipment from EMI/RFI line noise and surges

Cumulative leakage current less than 80 µA

Automatically shuts down all outlets in case of overload

Offers complete isolation from input AC mains power

Ideal for use in any industrial, network or medical environment

2-year limited warranty

Overview The IS1800HGDV Isolator® Series Dual-Voltage 115/230V 1800W 50/60Hz Medical-Grade™ Transformer with full CAN/ES/IEC/EN 60601-1 listing is ideal for protecting sensitive electronic equipment in patient-care vicinities.
It can be configured for either step-up voltage, step-down voltage or pass-through voltage operation.
Along with line isolation and continuous EMI/RFI line noise filtering, its surge protection rating of 240 joules suppresses excess voltage to prevent it from damaging connected equipment.

An internal low-impedance isolation transformer component offers 100% isolation from the input mains AC line.
Faraday shield reduces the cumulative leakage current of the IS1800HGDV and connected equipment to levels less than 100 microamps, while removing utility switching transients and harmonics generated by other on-site loads and reducing the impact of utility-related surge conditions.

IEEE 587 Category A and B ring wave and combination wave test surges to only 0.5V common mode.

Transformer filtering provides continuous common-mode noise rejection with no wearable parts.
The IS1800HGDV reduces 6000V

Components connect to eight C13 outlets with fuse overload protection and a lighted on/off switch.
The rugged all-metal unit housing ships ready for placement in any industrial, medical, office, network or audio/video environment.
Requires a C19 AC input cord with country specific plug (sold separately).

Product Features Protects sensitive equipment from EMI/RFI line noise and surges

Cumulative leakage current less than 100 µA

Automatically shuts down all outlets in case of overload

Offers complete isolation from input AC mains power

Ideal for use in any industrial, network or medical environment

2-year limited warranty

Tripp Lite SMX1200XLHGL SmartPro Medical-Grade UPS, Line Interactive, Lithium Battery, 6 Outlets - 230V, 1kVA, 750W, Full Isolation