The DrayTek POEINj1 is a Fast Ethernet PoE injector that is ideal if you need power for just one or two devices, you can use a single 'PoE injector to add PoE to one Ethernet network cable/device.
Compared to a large PoE switch, a PoE injector is more economonical if you need only a small number of PoE devices in a particular location as it is mains powered and inserts PoE into the Ethernet cable.
With the DrayTek PoE Injector POEINJ1, both power and data can be transmitted up to 328 feet (100m) using standard CAT5e Ethernet cabling with virtually no reduction in data throughput. Use the DrayTek PoE Injector with Ethernet-enabled devices where power outlets are not readily available.
The DrayTek VigorAP 920R is a wireless access point designed for outdoor environments. It is ideal for providing wireless access to users and devices in any outdoor scenarios, including restaurants, gardens, marinas, educational premises or, really, anywhere where outdoor access is needed.
Draytek VigorAP 920R Features:
Business-class Wireless Access Point
Ruggedised IP67 for outdoor usage and extreme unprotected environments
Simultaneous dual-band (2.4/5Ghz)
5GHz 802.11ac Wave 2 (up to 866mbps)
2.4GHz 802.11n (up to 400mbps)
Support for 5Ghz Extended Channels (100-140)
Centrally managed or standalone operation
Central Management supports mobility, load-balancing, monitoring, status, upgrade and configuration
WPA2 Wireless Encryption
Repeater/Bridge/Access Point & WDS
Bandwidth management per SSID
802.1q VLAN Tagging
Client Isolation & Multiple SSIDs
MAC Address Filtering
Radius / WPA & 802.1x User Authentication
Built-in Site Surveyor
Wall or Pole Mountable
The VigorAP 920R can be wall or pole-mounted - fixing brackets are included with the product, allowing the VigorAP to be fitted at up to 45° up & down and/or left & right.
Fully IP67 compliant, the product can work in extremes of heat, cold, dirty and wet environments. It is dust and water resistant and housed in a robust metal case to withstand harsh environments.
When we say 'ruggedised', this product has been designed from scratch, using high-tolerance components and designed to perform in all supported environments, in operating temperatures of well below freezing up to 70° Centrigrade. This isn't our indoor product 'put in a fancy box' and hoping for the best.
The VigorAP 920R is an 802.11ac Wave 2 dual-band access point, backwards compatible with 802.11ac Wave 1 & 802.11a/b/g/n wireless devices. It has 2.4GHz and 5GHz wireless radios for simultaneous dual band operation, with 4 individually configured SSIDs available on each band.
It is based on the same familiar OS as other DrayTek VigorAPs such as the VigorAP 902 and VigorAP 910C with scheduling (radio or individual SSIDs), 802.1X with RADIUS authentication (client or internal server) and many advanced wireless features which are detailed in the "Wireless Features" section.
In addition to direct web management, the VigorAP can be managed remotely through VigorACS
To monitor operating conditions, the VigorAP 920R has an integrated temperature and humidity sensor, which can display over time (1, 7 or 14 days) and send alerts via Syslog or E-mail should the VigorAP's internal temperature or humidity exceed safe levels.
Power is provided over the Ethernet cable (PoE 802.3af) using a PoE Ethernet switch or PoE injector.
MU-MIMO 802.11ac Wave 2
VigorAP 920R Series provides concurrent dual band, allows up to 128 clients on each band, 256 clients totally. It features the latest Wi-Fi technology, 802.11ac Wave 2 in the 5GHz band and 802.11n in the 2.4G band. The support of Multi-User MIMO (MU-MIMO) allows it to deliver high-performance wireless connection even in a crowded network.
IP67 Rated Dust & Water Resistant
VigorAP 920R Series is IP67 certified water and dust-resistant, and its industrial-grade components make it able to withstand cold and heat. VigorAP 920R can be operated well between -40°C and 70°C, and therefore is suitable for extreme weather conditions.
PoE Power Input & Energy Efficient
In response to the needs of energy saving, VigorAP 920R Series is IEEE802.3az compliant to reduce its energy consumption when data activity is low. VigorAP 920R Series can also be powered by Power over Ethernet to provide a flexible installation.
Central Management with a DrayTek Router
The VigorAP 920R can operate in standalone autonomous mode, but can also form part of a centrally managed wireless installation by adding a compatible DrayTek wireless controller (a Vigor2862, 2926, 2952 or 3220 router). This enables you to centrally control, manage and administer multiple AP devices installed around your building/campus. Management also enables efficient usage of your wireless access point through load-balancing, whereby wireless clients are distributed across several access points to reduce congestion.
The DrayTek router operating as the wireless controller can provision a DrayTek VigorAP access point using the Central AP Management profiles configured on the router, with an option to Auto Provision access points - which auto configures the VigorAP with the profile's settings configured onto the VigorAP upon initial connection to the DrayTek Vigor router's network.
Central Management with DrayTek VigorACS
The DrayTek VigorAP 920R can also be managed by the DrayTek VigorACS central management system - a cloud platform which can manage most DrayTek products - routers, wireless access points and Ethernet switches, giving you complete visibility and control of your DrayTek product estate, even without a DrayTek Vigor router on site.
The DrayTek VigorACS management system can be used to configure and provision DrayTek VigorAP access points, similarly to performing these actions through the VigorAP's web interface, with a familiar menu layout in the Configuration section of VigorACS.
Profiles for groups of access points can be provisioned in VigorACS by selecting a VigorACS network, then accessing Configuration > AP Profile to configure profiles and apply them selectively.
DrayTek's VigorACS management monitors the VigorAP 920R, with a Dashboard view giving a central overview of the most important information from the VigorAP's current status:
Supports two Gigabit Ethernet WAN Ports
with selectable SFP Socket for WAN1
USB 3G/4G/LTE USB modem can also be added
Wireless Management of up to 30 DrayTek APs
DrayOS Operating System
High performance - up to 500Mb/s firewall throughput
DrayTek Firewall with huge flexibility
Temperature Monitoring (optional thermometer)
High Availability (Hardware failover)
Hardware DMZ (LAN) RJ-45 Port
Conditional User Management
Multiple Private LAN Subnets
SMS (Text Message) Alert
VLANs (802.1q tag-based)
IGMP v3 MultiCast
Content Filtering (by keyword, data type or category)
LDAP Integration for VPN and user access
QoS (Layer 2&3, 802.1p & TOS/DCSP)
Up to 100 VPN tunnels for LAN-to-LAN or teleworkers
VPN Trunk/Backup to remote sites
SSL VPN - Tunnel or Proxy (50 users)
Optional VigorCare Available
The Vigor 2952 is a router/firewall with two Gigabit Ethernet WAN ports, providing load balancing or failover for up to two WAN connections. WAN1 can be selected as either RJ-45 or SFP format (SFP is for fibre modules). There are four LAN RJ-45 ports (Gigabit). The Vigor 2952 runs DrayTek's own DrayOS operating system, providing familiarity for users of other existing DrayTek products.
Robust & Comprehensive Firewall
Security is always taken seriously with DrayTek routers. The firewall protects against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems. Wireless, Ethernet and VPN are also protected by various protection systems. The DrayTek object-based firewall allows even more setup flexibility than ever, enabling you to create combinations of users, rules and restrictions to suit multi-departmental organisations. The Vigor 2952 now also allows selective direction firewall rules of LAN to WAN, WAN to LAN or LAN to VPN. In addition, QoS (Quality of Service Assurance) can now be selectively applied to specific users.
For mission critical applications, a pair of Vigor 2952's can be set up in high-availability mode - also known as 'hardware failover'. This removes the Vigor 2952 as a single point of failure if it ceases operation or is damaged - the standby router takes over operations.
Web Content Filtering
The content control features of the Vigor 2952 allows you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal. Using DrayTek's GlobalView service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription to the Cyren Globalview service, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.
The Vigor 2952 has built-in user management which allows you to provide conditional internet access to different users based on their own unique login (stored in the router, or on an external Radius server) and including the restrictions of web content filtering (above) too.
3G/4G Cellular Data Features
The Vigor 2952's USB port can host a compatible 3G/4G/LTE USB modem for access to the cellular network for full Internet Access as your primary or failover WAN connectivity. Network Attached Storage (NAS)
Either of the Vigor 2952's USB ports can also be used to add storage memory to the unit in the form of a USB memory stick. That memory can be used for recording syslogs or accessed as a simple FTP/file storage for users, local or remote (password protected). Requires a USB memory stick (up to 64Gb, FAT32 formatted). WAN Load Balancing & Backup
The Vigor 2952's two WAN interfaces can be used either for WAN-Backup or load balancing. Each of the 2 WAN Ethernet ports can be connected to any Ethernet-based Internet connection, such as a DSL modem, cable modem, leased line etc. One port can use an SFP module instead of Ethernet.
In Load-balancing mode, the router will spread your Internet sessions across all Internet connections to make best use of your available total bandwidth. This can be automatic, according to rules or reserving specific WAN connections for specific clients or services.
WAN-Backup (failover) provides contingency (redundancy) in case of your primary connection or ISP sufferers temporary outage. Internet Traffic will be temporarily routed via the second, third or fourth Internet connection. When normal services is restored to your primary line(s), all traffic is switched back to that.
802.1q Tagged, Wireless & Port Based VLAN
The Vigor 2925 features a hugely flexible VLAN system. Each of the six Gigabit LAN ports can be isolated from each other, for example to feed different companies or departments but keeping their local traffic completely separated.
VPN - Linking remote offices, HQ, teleworkers and mobile staff
A feature central to DrayTek routers is the VPN (Virtual Private Networking) features. A VPN enables you to link two remote offices, branch offices back to HQ or home-based/mobile teleworkers back to your office. Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing and seamless access to other resources and devices.
The Vigor 2952 allows you to set up up to 100 simultaneous VPN tunnels to remote offices or from remote teleworkers. The Vigor 2952 industry standard protocols, including encryption and authentication methods. Teleworkers can authenticate directly with your LDAP server if preferred.
The Vigor2952 supports VPN trunking; this allows you to create tunnels down muliple WAN connections to a remote site in order to increase bandwidth. VPN trunking also provides failover (backup) of your VPN route down a secondary WAN connection.
The Vigor 2952 also supports SSL VPN. These are encrypted tunnels linking your teleworker back to your main office but they are 'clientless in that your O/S does not need to generate the tunnel and you do not need to install any VPN software manually. You instigate an SSL tunnel from your regular web browser, so it could be in a web cafe or guest network, and the tunnel is creating using SSL technology - the same encryption that you use for secure web sites such as your bank. The Vigor2952 can operate SSL VPNs in either Proxy or full tunnel mode and allows up to 50 simultaneous incoming users. For SSL VPN tunnel mode Windows OS is supported.