AXIS FA1080-E Thermal Sensor Unit - 4MM 8.3 FPS
Outdoor-ready thermal sensor unit
• Reliable thermal detection 24/7
• Possibilities for multi-channel setup
• Two variants with a choice of lenses
• For use with AXIS FA54 Main Unit
• Outdoor-ready, discreet sensor unit
AXIS FA1080-E offers all the benefits of thermal imaging at a price that’s within reach. Used together with AXIS FA54 Main Unit and analytics such as AXIS Fence Guard, it reliably detects people, vehicles, and objects regardless of light conditions or attempts at camouflage.
Protect your property with thermal imaging
AXIS FA1080-E creates images based on the heat that radiates from an object, vehicle, or person. And, because thermal cameras are less sensitive to lighting conditions, such as shadows, backlight, darkness, and camouflaged objects, you are guaranteed reliable images. It’s possible to build a flexible perimeter protection solution using Axis analytics, such as AXIS Motion Guard, AXIS Fence Guard, and AXIS Loitering Guard together with a modular solution with four thermal cameras. This could be useful for outdoor environments, such as at construction sites to protect containers with valuable materials. Modular thermal cameras help keep the area safe in a cost-efficient way while reducing the number of false alarms.
Mix thermal and visual imaging all in one
This sensor unit can be used in a single or multi-channel setup to create a flexible, tailored approach to surveillance depending on your needs – indoors or out. Using AXIS FA-Series, you can use up to four sensor units, together with AXIS FA54 Main Unit. It also allows you to mix, for instance, thermal cameras with visual cameras where the sensor unit can be used for intruder detection. This means you can place a visual sensor unit in the same area to verify if there is a threat.
Flexible and discreet
This compact, discreet unit can be mounted behind surfaces, on walls, recessed, or inside a bullet-shaped accessory. Together with AXIS FA54 Main Unit, the setup supports Zipstream, analytics, HDMI support for connection to a surveillance or public viewing monitor (PVM), and audio input/output ports. Plus, four configurable input/output ports allow you to connect to external devices such as door locks and lights for handling alarm events and local storage.
Please note, AXIS FA1080-E Thermal Sensor Unit is supported only by AXIS FA54 Main Unit firmware 9.30 or later.
A choice of lenses for wide and narrow views
AXIS FA1080-E is available in two variants with a choice of lenses to meet your specific requirements. A 2.2 mm lens offers a 63 degrees field of view for a wider view that covers more of the scene, and a 4 mm lens with a viewing angle of 36 degrees for capturing narrower fields of view with longer detection distances.
Thermal imaging
Detect and verify in challenging conditions, without compromising privacy.
Features
Housing material
Aluminium
Brand compatibility
Axis
Compatibility
FA54
Type
Sensor unit
Placement supported
Universal
Product colour
Black
International Protection (IP) code
IP66
Focal length range
4 - 4 mm
F-number (relative aperture)
1.2
Viewing angle, horizontal
35.4°
Viewing angle, vertical
28°
Resolution
208 x 156 pixels
Number of connectors
1
Cable length
12 m
Technical details
Compatibility
FA54
Type
Sensor unit
Placement supported
Universal
International Protection (IP) code
IP66
Operational conditions
Operating temperature (T-T)
-30 - 60 °C
Storage temperature (T-T)
-40 - 65 °C
Operating relative humidity (H-H)
10 - 100 %
Full specification and details can be found in the Product Datasheet PDF file
AXIS FA1080-E Thermal Sensor Unit - 2.2MM 8.3 FPS
Outdoor-ready thermal sensor unit
• Reliable thermal detection 24/7
• Possibilities for multi-channel setup
• Two variants with a choice of lenses
• For use with AXIS FA54 Main Unit
• Outdoor-ready, discreet sensor unit
AXIS FA1080-E offers all the benefits of thermal imaging at a price that’s within reach. Used together with AXIS FA54 Main Unit and analytics such as AXIS Fence Guard, it reliably detects people, vehicles, and objects regardless of light conditions or attempts at camouflage.
Protect your property with thermal imaging
AXIS FA1080-E creates images based on the heat that radiates from an object, vehicle, or person. And, because thermal cameras are less sensitive to lighting conditions, such as shadows, backlight, darkness, and camouflaged objects, you are guaranteed reliable images. It’s possible to build a flexible perimeter protection solution using Axis analytics, such as AXIS Motion Guard, AXIS Fence Guard, and AXIS Loitering Guard together with a modular solution with four thermal cameras. This could be useful for outdoor environments, such as at construction sites to protect containers with valuable materials. Modular thermal cameras help keep the area safe in a cost-efficient way while reducing the number of false alarms.
Mix thermal and visual imaging all in one
This sensor unit can be used in a single or multi-channel setup to create a flexible, tailored approach to surveillance depending on your needs – indoors or out. Using AXIS FA-Series, you can use up to four sensor units, together with AXIS FA54 Main Unit. It also allows you to mix, for instance, thermal cameras with visual cameras where the sensor unit can be used for intruder detection. This means you can place a visual sensor unit in the same area to verify if there is a threat.
Flexible and discreet
This compact, discreet unit can be mounted behind surfaces, on walls, recessed, or inside a bullet-shaped accessory. Together with AXIS FA54 Main Unit, the setup supports Zipstream, analytics, HDMI support for connection to a surveillance or public viewing monitor (PVM), and audio input/output ports. Plus, four configurable input/output ports allow you to connect to external devices such as door locks and lights for handling alarm events and local storage.
Please note, AXIS FA1080-E Thermal Sensor Unit is supported only by AXIS FA54 Main Unit firmware 9.30 or later.
A choice of lenses for wide and narrow views
AXIS FA1080-E is available in two variants with a choice of lenses to meet your specific requirements. A 2.2 mm lens offers a 63 degrees field of view for a wider view that covers more of the scene, and a 4 mm lens with a viewing angle of 36 degrees for capturing narrower fields of view with longer detection distances.
Thermal imaging
Detect and verify in challenging conditions, without compromising privacy.
Performance
Type
IP security camera
Connectivity technology
Wired
Placement supported
Indoor
Thermal sensitivity (NETD)
100 mK
Thermal module
Yes
Design
Form factor
Covert
Mounting type
Wall
International Protection (IP) code
IP66, IP67
Camera
Viewing angle, horizontal
63°
Viewing angle, vertical
47°
Lens system
Number of lenses
1
Focus adjustment
1.0
Focal length range
2.2 mm
Infrared spectral band
8 - 14 µm
Video
Maximum resolution
208 x 156 pixels
Frame rate
8.3 fps
Video intelligence analytic
Yes
Ports & interfaces
HDMI ports quantity
1
Connectivity technology
Wired
Security
Detection distance
309 m
Human and vehicle targets classification
Yes
Operational conditions
Operating temperature (T-T)
-30 - 55 °C
Storage temperature (T-T)
-40 - 65 °C
Operating relative humidity (H-H)
10 - 100%
Full specification and details can be found in the Product Datasheet PDF file
- Review: The 10 Best Wireless Access Points
- Review: The Top 10 Best Ethernet Cables
- What Is An Ethernet Cable And What Does It Do?
- 10 Best CCTV Security IP Cameras For Home & Business
- Review: Best Powerline Adapters In The UK
- Celebrating 20 Years Of Comms Express!
- The Top 10 DrayTek Wireless Access Points
- Best Selling APC Products At Comms Express
- Review: Top 5 Best Performing APC Uninterruptible Power Supply Units (UPS)
- Review: Top 10 Best PDU’s