Hi there! Our website may store cookies on your computer in order to give you
the best experience, such as remembering the items in your cart so you
can continue shopping where you left off.
By continuing to use our site, you give consent for cookies to be used.
Time spent troubleshooting network performance problems takes away from critical projects. The OneTouch AT Network Assistant helps save time by providing a complete set of tools for Gigabit, fiber optic, and Wi-Fi networks — including network path performance testing.
This ultimate Network Assistant standardizes troubleshooting with pre-defined AutoTest profiles so field technicians can quickly isolate common problems. Full remote control capability enables collaborative troubleshooting between experienced engineers and on-site technicians, speeding up problem time to resolve trouble tickets.
The OneTouch AT empowers professionals to validate and troubleshoot Ethernet and Wi-Fi access networks — reducing tests from hours to minutes.
Verify connectivity and performance of wired and Wi-Fi networks in minutes with the one-button AutoTest.
Conduct quick rogue hunting to isolate problems by discovering networks and connected devices.
Capture packets and perform in-line VoIP analysis.
Automate reporting and enable collaboration with upload and management test results via Link-Live Cloud Service.
Versatile Copper, Fiber, and Wi-Fi troubleshooting
Tackle a broad range of troubleshooting scenarios with the handheld OneTouch AT G2 Network Assistant. The OneTouch AT G2 1500 and 3000 tester incorporates dual copper and fiber-optic test ports to facilitate troubleshooting of 10/100/1000 Mbps twisted pair and 100/1000 Mbps fiber Ethernet networks.
The dual ports simplify inline packet capture and VoIP monitoring by eliminating the need for mirror ports or taps. The OneTouch AT G2 3000 tester adds an 802.11ac dual-band Wi-Fi radio with a 3×3 antenna for troubleshooting Wi-Fi networks. When connected to both wired and Wi-Fi networks, the tester displays test results side-by-side on a single page to aid in problem domain isolation.
A 10G test module replaces the 1G Wired and Wi-Fi test module for testing wired 100Mbps to 10Gbps Ethernet switch port and link performance at up to 10Gbps rate.
Network Service Testing
Test DHCP and DNS server responsiveness. Identify the wired and Wi-Fi DHCP and DNS servers and view the DHCP offer and acceptance timing and lease information, and the DNS lookup time. Also, determine if a second DHCP address is being offered.
If unexpected or is a potential rogue server, use the path analysis tool to track down the switch port that the device is connected to mitigate the potential network downtime and security risk.
End-to-end Path Performance Measurement
Ensure that the newly installed or upgraded wired and Wi-Fi networks meet SLA objectives and are ready for new high-bandwidth applications by measuring end-to-end path performance. Measure throughput, frame loss, latency and jitter between a local OneTouch AT and a remote OneTouch AT peer or a reflector, such as LinkRunner or NPT Reflector software.
A remote peer provides upstream and downstream results, while a remote reflector yields round trip results. OneTouch AT G2 measures performance on copper and fiber networks at rates up to 1Gbps based on RFC2544 algorithm and 600 Mbps on Wi-Fi networks. OneTouch 10G can measure network performance up to 10Gbps based on Y1564 against another OneTouch 10G Peer.
OneTouch can also perform iPerf test against any iPerf v3.x server or a NetAlly TEST-ACC over Wi-Fi or Wired network. It is best used to assess maximum throughput achievable for a TCP stream or network performance for UDP stream during troubleshooting.
Wi-Fi and wired client devices connectivity testing
Automatically discover Wi-Fi devices and key device properties, including new 802.11ac access points and clients. Select from among 20 context-relative sorts to obtain different views into the wireless network. For example, sort by signal strength to troubleshoot Wi-Fi coverage issues.
Sort by MAC manufacturer to discover Wi-Fi devices by type and to understand how they are connected relative to SSID, AP and channel. Sort by channel to identify channel spacing and usage problems. Sort by authorization status to find potential security violations.
Additional discovery-assisted analysis tools aid with troubleshooting and security enforcement. If a Wi-Fi device is also discovered via Wired Analysis, the Cross Link feature enables one-button toggling between wired and Wi-Fi analysis views.
Model Comparison
Technical Specifications
General
Dimensions (with module and battery installed)
10.3 in x 5.3 in x 2.9 in (26.2 cm x 13.5 cm x 7.3 cm)
Weight (with module and battery installed)
3.5 lb (1.6 kg)
Display
5.7 in (14.5 cm) LCD with projected capacitance touchscreen, 480 x 640 pixels
External AC Adapter/Charger
Input: 100-240 V AC, 50-60 Hz, 1.0 Amps Output: +15 V Dc, 2.0 Amps
Battery type
Lithium ion battery pack, 7.2 V
Battery life
Approximately 3-4 hours depending on type of usage. 4 hours to charge from 10% capacity to 90% capacity with the unit powered off
Memory
Internal: 2 GB shared between system and user files
SD card: 4/8 GB, brand and model selected for optimal performance
USB 2.0 type A port: for use with USB mass storage devices
Antenna, frequency range 2.4 – 2.5 and 4.9 – 5.9 GHz
Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band
External antenna connector (external antenna port is receive-only, no transmit)
Reverse SMA
Time spent troubleshooting network performance problems takes away from critical projects. The OneTouch AT Network Assistant helps save time by providing a complete set of tools for Gigabit, fiber optic, and Wi-Fi networks — including network path performance testing.
This ultimate Network Assistant standardizes troubleshooting with pre-defined AutoTest profiles so field technicians can quickly isolate common problems. Full remote control capability enables collaborative troubleshooting between experienced engineers and on-site technicians, speeding up problem time to resolve trouble tickets.
The OneTouch AT empowers professionals to validate and troubleshoot Ethernet and Wi-Fi access networks — reducing tests from hours to minutes.
This Tester Kit includes:
100/1000 Mbps and 10G copper/fiber test module
2 1G SX SFP fiber transceivers
Wireview wire mappers #1 - #6
SD card
USB Flash Drive
frame carry strap
hand strap
AC adapter with line cord
patch cable and coupler
soft carrying case
Quick Start Guide
Resource CD with user manual
Key Features
Verify connectivity and performance of wired and Wi-Fi networks in minutes with the one-button AutoTest.
Conduct quick rogue hunting to isolate problems by discovering networks and connected devices.
Capture packets and perform in-line VoIP analysis.
Automate reporting and enable collaboration with upload and management test results via Link-Live Cloud Service.
Versatile Copper, Fiber, and Wi-Fi troubleshooting
Tackle a broad range of troubleshooting scenarios with the handheld OneTouch AT G2 Network Assistant. The OneTouch AT G2 1500 and 3000 tester incorporates dual copper and fiber-optic test ports to facilitate troubleshooting of 10/100/1000 Mbps twisted pair and 100/1000 Mbps fiber Ethernet networks.
The dual ports simplify inline packet capture and VoIP monitoring by eliminating the need for mirror ports or taps. The OneTouch AT G2 3000 tester adds an 802.11ac dual-band Wi-Fi radio with a 3×3 antenna for troubleshooting Wi-Fi networks. When connected to both wired and Wi-Fi networks, the tester displays test results side-by-side on a single page to aid in problem domain isolation.
A 10G test module replaces the 1G Wired and Wi-Fi test module for testing wired 100Mbps to 10Gbps Ethernet switch port and link performance at up to 10Gbps rate.
Network Service Testing
Test DHCP and DNS server responsiveness. Identify the wired and Wi-Fi DHCP and DNS servers and view the DHCP offer and acceptance timing and lease information, and the DNS lookup time. Also, determine if a second DHCP address is being offered.
If unexpected or is a potential rogue server, use the path analysis tool to track down the switch port that the device is connected to mitigate the potential network downtime and security risk.
End-to-end Path Performance Measurement
Ensure that the newly installed or upgraded wired and Wi-Fi networks meet SLA objectives and are ready for new high-bandwidth applications by measuring end-to-end path performance. Measure throughput, frame loss, latency and jitter between a local OneTouch AT and a remote OneTouch AT peer or a reflector, such as LinkRunner or NPT Reflector software.
A remote peer provides upstream and downstream results, while a remote reflector yields round trip results. OneTouch AT G2 measures performance on copper and fiber networks at rates up to 1Gbps based on RFC2544 algorithm and 600 Mbps on Wi-Fi networks. OneTouch 10G can measure network performance up to 10Gbps based on Y1564 against another OneTouch 10G Peer.
OneTouch can also perform iPerf test against any iPerf v3.x server or a NetAlly TEST-ACC over Wi-Fi or Wired network. It is best used to assess maximum throughput achievable for a TCP stream or network performance for UDP stream during troubleshooting.
Wi-Fi and wired client devices connectivity testing
Automatically discover Wi-Fi devices and key device properties, including new 802.11ac access points and clients. Select from among 20 context-relative sorts to obtain different views into the wireless network. For example, sort by signal strength to troubleshoot Wi-Fi coverage issues.
Sort by MAC manufacturer to discover Wi-Fi devices by type and to understand how they are connected relative to SSID, AP and channel. Sort by channel to identify channel spacing and usage problems. Sort by authorization status to find potential security violations.
Additional discovery-assisted analysis tools aid with troubleshooting and security enforcement. If a Wi-Fi device is also discovered via Wired Analysis, the Cross Link feature enables one-button toggling between wired and Wi-Fi analysis views.
Model Comparison
Technical Specifications
General
Dimensions (with module and battery installed)
10.3 in x 5.3 in x 2.9 in (26.2 cm x 13.5 cm x 7.3 cm)
Weight (with module and battery installed)
3.5 lb (1.6 kg)
Display
5.7 in (14.5 cm) LCD with projected capacitance touchscreen, 480 x 640 pixels
External AC Adapter/Charger
Input: 100-240 V AC, 50-60 Hz, 1.0 Amps Output: +15 V Dc, 2.0 Amps
Battery type
Lithium ion battery pack, 7.2 V
Battery life
Approximately 3-4 hours depending on type of usage. 4 hours to charge from 10% capacity to 90% capacity with the unit powered off
Memory
Internal: 2 GB shared between system and user files
SD card: 4/8 GB, brand and model selected for optimal performance
USB 2.0 type A port: for use with USB mass storage devices
Cable types
100 Ω Unshielded Twisted Pair (UTP) LAN cables.
100 Ω Shielded or Screened Twisted Pair (SeTP) LAN cables.
TIA Category 3, 4, 5, 5e, and 6. ISO Class C, D, E, and F.
Cable length measurement
Measurable cable lengths are from 3 ft (1 m) to 656 ft (200 m)
Environmental
Operating temperature
32°F to 122°F (0°C to 50°C )
Battery charging temperature
32°F to 104°F (0°C to 40°C)
Storage temperature
-40°F to 160°F (-40°C to 71°C) -4°F to 122°F (-20°C to 50°C) for periods longer than 1 week
Operating relative humidity (% RH without condensation)
5% to 45% at 32°F to 122°F (0°C to 50°C) 5% to 75% at 32°F to 104°F (0°C to 40°C) 5% to 95% at 32°F to 86°F (0°C to 30°C)
Shock and vibration
Meets the requirements of MIL-PRF-28800F for Class 3 Equipment
Safety
CAN/CSA-C22.2 No. 61010-1-04, IEC 61010-1:2001
Operating altitude
13,123 ft (4,000 m), 10,500 ft (3,200 m) with AC adapter
Antenna, frequency range 2.4 – 2.5 and 4.9 – 5.9 GHz
Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band
External antenna connector (external antenna port is receive-only, no transmit)
Reverse SMA
Email product to a friend Print product details
View Keywording:
Due to the size, weight and delicate nature of Data and Server Cabinets, specialist couriers are required so they arrive on site in pristine condition.
We do our utmost to bare the delivery costs meaning we can deliver your cabinet free of charge to most areas, unfortunately there are some areas of the UK we are charged a lot more to deliver to and whilst we absorb as much of this cost as we viably can in certain cases we have to pass on some of these costs. Below is a list of these areas and the additional costs of delivery per cabinet.