0
Item:
£0.00
Subtotal:
MGE Pulsar M 3000VA - Netpac
2u Rackmount UPS
Part No.:
Part No.:
MGE68417
Discontinued
This product is no longer available from Comms Express.
This product is no longer available from Comms Express.
Overview
MGE UPS SYSTEMS is a global provider of power quality solutions designed to increase the availability and uptime of mission-critical applications or processes, from a simple desktop PC to a large Internet Data Center or a semi-conductor manufacturing plant.
PRODUCT FEATURES:
Double conversion on-line UPS with automatic by-pass and power factor correction;
The HotSwap MBP (Maintenance By-Pass) module allows the battery to be replaced without interrupting the power supply;
The ModularEasy kit makes it easy to parallel 2 standard Pulsar M UPSs (N + 1 redundancy);
The Pulsar output sockets are individually controlled to provide load-shedding to maximize the backup time;
Provides remote reboot and sequential start-up as standard;
1 to 4 EXB battery units can be added to the Pulsar M;
A simple, low cost solution for uprating by adding a second standard UPS;
Multilingual display, access to a wide range of measurements and set-up menus;
A wide range of options using the Solution-Pac supplied: SNMP and HTML, ModBus/JBus and relay outputs;
With FlexPDU and HotSwap MBP the Pulsar M can be connected by sockets or terminal blocks (they can be installed as required behind, on the side or on top of the unit).
PRODUCT FEATURES:
Double conversion on-line UPS with automatic by-pass and power factor correction;
The HotSwap MBP (Maintenance By-Pass) module allows the battery to be replaced without interrupting the power supply;
The ModularEasy kit makes it easy to parallel 2 standard Pulsar M UPSs (N + 1 redundancy);
The Pulsar output sockets are individually controlled to provide load-shedding to maximize the backup time;
Provides remote reboot and sequential start-up as standard;
1 to 4 EXB battery units can be added to the Pulsar M;
A simple, low cost solution for uprating by adding a second standard UPS;
Multilingual display, access to a wide range of measurements and set-up menus;
A wide range of options using the Solution-Pac supplied: SNMP and HTML, ModBus/JBus and relay outputs;
With FlexPDU and HotSwap MBP the Pulsar M can be connected by sockets or terminal blocks (they can be installed as required behind, on the side or on top of the unit).
| Product Description: | MGE UPS Pulsar M 3000 RT2U Netpack - UPS - 3000 VA |
| Device Type: | UPS |
| Form Factor: | External 2U |
| Dimensions (WxDxH): | 44 cm x 64 cm x 8.6 cm |
| Weight: | 31 kg |
| Input Voltage: | AC 100/120/160/184-284 V |
| Output Voltage: | AC 200/208/220/230/240 V ( 50/60 Hz ) |
| Power Provided: | 3000 VA |
| Output Connector(s): | 9 x power IEC 320 EN 60320 C13, power IEC 320 EN 60320 C19 |
| Battery: | - Lead Acid - 12 V - 9 Ah |
| Battery Form Factor: | Internal |
| Batteries Qty: | 6 |
| Run Time (Up To): | 15 min at half load |
| Networking: | Ethernet 10/100 |
| Remote Management Protocol: | SNMP, HTTP |
| Manufacturer Warranty: | 2 years warranty |
0800 488 0000
0800 488 0001